Westfall Manufacturing Co.
Bristol, RI 02809
Static Mixer targets mobile gas well fracking rigs.
Consisting of length of pipe with 3 sets of tabbed fins inside, Model 3050 3-Stage Mixer installs in-line providing thorough mixing with low head loss. Product dissolves peracetic acid into influent water at 4,620 gpm, and produces 1.64 K value and typical CoV of 0.014. Fabricated from carbon or stainless steel, with or without Teflon-® coating, 16 in. x 6 ft long mixer is clog-resistant,...
Read More »
Variable Flow Static Mixer enables bitumen pumping via pipeline.
Constructed of 316SS and available in 2–60 in. ID sizes, Model 2900 mixes multiple diluents to correct viscosity and density over wide range of flow rates, achieving- uniform concentration of injected materials within short downstream distance. Unit is combined with wafer-style static mixer to achieve low CoV of injected diluents. Accommodating flow rates at up to 20:1 turndown ratio,- system...
Read More »
Static Mixer Receives NSF Certification
Bristol, RI - Westfall Manufacturing Company has announced that their Model 2800 Static Mixer has passed chemical extraction testing and toxicological evaluation by NSF International (formerly National Sanitation Foundation), an independent, not-for-profit organization. Westfall's Model 2800 Static Mixer is a fixed plate which mounts in-line, can inject up to four chemicals simultaneously, and...
Read More »
Open Channel Mixer needs no power for operation.
Suited for municipal chlorination applications, Model 4000 consists of pipe fitted with inlet cone that is mounted in bulkhead and features 3 sets of vanes that create vortices and multiple zones of turbulence that intersect to produce optimal mixing. Raked angles of vanes prevent fouling and mitigate swirl to produce smooth flow. Mixing with CoV 0.008, 10 dia downstream, unit has no moving parts...
Read More »
Static Injection Mixer suits highly corrosive applications.
Westfall Static Injection Mixer, used for blending corrosive chemicals such as chlorine dioxide, has orifice pattern that mixes via combination of alternate vortex shedding and intense shear zone turbulence to achieve greater than 98% dispersion within 10 diameters downstream. Constructed from titanium, zirconium, or Hastelloy-®, inline fixed plate mixer, offered in 2-120 in. dia sizes, can be...
Read More »
Triple-Stage Inline Mixer produces minimal head loss.
Capable of producing 1.64 K value and typical CoV of 0.014, static mixer Model 3053 consists of length of pipe fitted with 1-3 sets of tabbed fins featuring precise geometry that turns flow inside-out for mixing liquids and gases. Fins are radially disposed inside pipe for thorough mixing with low head loss. Available fabricated from PVC, FRP, or 316 stainless steel, with or without PTFE coating,...
Read More »
Flow Conditioner minimizes flow meter errors.
Designed to mount directly into piping system, Model 3000 features 4 leading tabs and 4 anti-swirl plates that suppress turbulence and swirl to produce fully developed velocity profile within 8 diameters downstream. Unit is available in sizes from -½-120 in. diameter and measures 2 diameters long. Fabricated from PVC, FRP, or 316 SS with or without Teflon-® coating, conditioner is suitable for...
Read More »
Static Mixer has no moving parts.
Capable of injecting 4 chemicals simultaneously, Model 2800 in-line static mixer mounts directly into piping system and features fixed-plate with internal design that rapidly mixes using combination of alternate vortex shedding and intense shear zone turbulence. Available in sizes from -¼ to 120 in. dia, unit can be made from PVC, FRP, SST, Titanium, Hastelloy-®, and carbon fiber. It utilizes...
Read More »
Flow Meter measures aeration at sewage treatment plants.
Custom built to meet specific sewage treatment air handling system requirements, Westfall 2350 Series Venturi Flow Meter features epoxy vinyl ester construction with 1 in. thick stainless steel throat and 1-¼ in. thick 316L SS full-face 48 in. flange. It has no moving parts, and is designed for 50,000 scfm rate of flow. Corrosion-resistant flow meter has short laying length design, provides low...
Read More »
Static Injection Mixer blends additives into gasoline.
Used for blending ethanol and other additives into gasoline and other fuels, Static Mixer is heavy-wall 316 SS fixed plate which features orifice pattern that mixes by combination of alternate vortex shedding and intense shear zone turbulence to achieve greater than 98% dispersion within 10 diameters downstream. Designed to fit inside mating flange bolt circle of any piping system, mixer is...
Read More »
Static Mixer targets mobile gas well fracking rigs.
Consisting of length of pipe with 3 sets of tabbed fins inside, Model 3050 3-Stage Mixer installs in-line providing thorough mixing with low head loss. Product dissolves peracetic acid into influent water at 4,620 gpm, and produces 1.64 K value and typical CoV of 0.014. Fabricated from carbon or stainless steel, with or without Teflon-® coating, 16 in. x 6 ft long mixer is clog-resistant,...
Read More »
Variable Flow Static Mixer enables bitumen pumping via pipeline.
Constructed of 316SS and available in 2–60 in. ID sizes, Model 2900 mixes multiple diluents to correct viscosity and density over wide range of flow rates, achieving- uniform concentration of injected materials within short downstream distance. Unit is combined with wafer-style static mixer to achieve low CoV of injected diluents. Accommodating flow rates at up to 20:1 turndown ratio,- system...
Read More »
Static Mixer Receives NSF Certification
Bristol, RI - Westfall Manufacturing Company has announced that their Model 2800 Static Mixer has passed chemical extraction testing and toxicological evaluation by NSF International (formerly National Sanitation Foundation), an independent, not-for-profit organization. Westfall's Model 2800 Static Mixer is a fixed plate which mounts in-line, can inject up to four chemicals simultaneously, and...
Read More »
Open Channel Mixer needs no power for operation.
Suited for municipal chlorination applications, Model 4000 consists of pipe fitted with inlet cone that is mounted in bulkhead and features 3 sets of vanes that create vortices and multiple zones of turbulence that intersect to produce optimal mixing. Raked angles of vanes prevent fouling and mitigate swirl to produce smooth flow. Mixing with CoV 0.008, 10 dia downstream, unit has no moving parts...
Read More »
Static Injection Mixer suits highly corrosive applications.
Westfall Static Injection Mixer, used for blending corrosive chemicals such as chlorine dioxide, has orifice pattern that mixes via combination of alternate vortex shedding and intense shear zone turbulence to achieve greater than 98% dispersion within 10 diameters downstream. Constructed from titanium, zirconium, or Hastelloy-®, inline fixed plate mixer, offered in 2-120 in. dia sizes, can be...
Read More »
Triple-Stage Inline Mixer produces minimal head loss.
Capable of producing 1.64 K value and typical CoV of 0.014, static mixer Model 3053 consists of length of pipe fitted with 1-3 sets of tabbed fins featuring precise geometry that turns flow inside-out for mixing liquids and gases. Fins are radially disposed inside pipe for thorough mixing with low head loss. Available fabricated from PVC, FRP, or 316 stainless steel, with or without PTFE coating,...
Read More »
Flow Conditioner minimizes flow meter errors.
Designed to mount directly into piping system, Model 3000 features 4 leading tabs and 4 anti-swirl plates that suppress turbulence and swirl to produce fully developed velocity profile within 8 diameters downstream. Unit is available in sizes from -½-120 in. diameter and measures 2 diameters long. Fabricated from PVC, FRP, or 316 SS with or without Teflon-® coating, conditioner is suitable for...
Read More »
Static Mixer has no moving parts.
Capable of injecting 4 chemicals simultaneously, Model 2800 in-line static mixer mounts directly into piping system and features fixed-plate with internal design that rapidly mixes using combination of alternate vortex shedding and intense shear zone turbulence. Available in sizes from -¼ to 120 in. dia, unit can be made from PVC, FRP, SST, Titanium, Hastelloy-®, and carbon fiber. It utilizes...
Read More »
Flow Meter measures aeration at sewage treatment plants.
Custom built to meet specific sewage treatment air handling system requirements, Westfall 2350 Series Venturi Flow Meter features epoxy vinyl ester construction with 1 in. thick stainless steel throat and 1-¼ in. thick 316L SS full-face 48 in. flange. It has no moving parts, and is designed for 50,000 scfm rate of flow. Corrosion-resistant flow meter has short laying length design, provides low...
Read More »
Static Injection Mixer blends additives into gasoline.
Used for blending ethanol and other additives into gasoline and other fuels, Static Mixer is heavy-wall 316 SS fixed plate which features orifice pattern that mixes by combination of alternate vortex shedding and intense shear zone turbulence to achieve greater than 98% dispersion within 10 diameters downstream. Designed to fit inside mating flange bolt circle of any piping system, mixer is...
Read More »