Infinite Electronics, Inc.
Irvine, CA 92614
Share:
Latest VNA Cables Come with NMD-Style Connectors
Feature braided and stainless-steel armoring surrounding. Offer performance up to 70 GHz and can withstand 100,000 flexure cycles . Designed for wide range of demanding lab and test applications.
Read More »
New POE10GA-Series PoE Midspans Feature Shielded RJ45 Ports
Offers high-speed voice, video and data connectivity to IP enabled end devices. Support PoE, PoE+ and PoE++ applications and provide a fast way to supply power and data to IP enabled end devices. Works with a devices including network switches, digital signage, building, lighting and traffic control systems.
Read More »
New M12 Cables Offered with Male, Female and Right-angle Connector Combinations
Includes M12 to M12, M12 to RJ45 and M12 to cut-end options and metal armored versions. Features straight wire, Cat5e and Cat6a rated assemblies in IP67, IP68 and IP69K versions. Built to endure the harsh environments often found in factory automation, oil and gas, wastewater and process automation.
Read More »
New Integrated Power Systems are UL 60950-1 Certified
1 RU IPS features 45A/2.4kW power rating and four pre-populated load circuit breakers while 2 RU IPS features 180A/8.7kW power rating and five pre-populated load circuit breakers. Offer load controller with LCD touchscreen plus remote access and support Ethernet SNMPv3 communications. Rectify AC power and intelligently distribute to DC loads, with an advanced load controller.
Read More »
New NEMA-Rated Equipment Enclosures are Ideal for Indoor and Outdoor Installations
Offered in 14x12x06 in. and 18x16x10 in. sizes with off-the-shelf options that include 120 VAC and 240 VAC power, and DIN rail mounts. Feature stainless-steel latch with padlock eye, fully gasketed lids and wall mounting brackets. Constructed of UV-resistant, high-impact polycarbonate material that is suitable for use in corrosive and high temperature environments.
Read More »
New Bi-Phase Modulators with Maximum Peak RF Input Power of 0.5 W
Includes low insertion loss of 2.5 dB, fast switching speed of 40 nsec typ and low VSWR of 1.8:1 typ. Uses TTL logic to phase modulate data onto an RF carrier signal using 2 phase shift keying. Suitable for microwave radio, radar, high-data-rate test and measurement.
Read More »
New Field Replaceable RF Connectors with 2 and 4-Hole Mounting Configurations
Utilizes a metal ring that grounds or mates with the component ground and will work with a range of different pin sizes. Connector is attached to the wall of the component with screws and accepts the interface pin. Designed for use in various civil and military telecommunications, civil and military aeronautics applications.
Read More »
New CBRS Antenna Line Provides 360-degree Coverage with 8.5 dBi of Gain
Features 4 ports, +/- 45 slant polarization and covers the 3500-3800 MHz frequency bands. Comprised of two dual-polarized Omni arrays in a single radome enclosure with one mounting point. Ideal for 4-sector frequency reuse with 4x4 MIMO LTE equipment and CBRS deployments.
Read More »
New VNA Test Cables for Semiconductor Probe and Precise Bench Top Testing
Cables are terminated with rugged, stainless-steel connectors that provide up to 5,000 mating cycles when attached with proper care. Flexibility of these cables makes it simple and safe to test a device under test (DUT). Swept right-angle 2.4 mm and 1.85 mm connector option allows these cables to fit into tight spaces.
Read More »
Latest Cat6a and Cat5e Cables are Offered in Double-Shielded or Foil-Shielded
Available with different flexibility and shielding options and are engineered to all key industry standards. Lengths range from 1 foot to 250 feet, providing solutions for long background cable runs or short in-panel jumpers. Ideal for all types of data/Ethernet applications, including PLC/PC controls, WLAN amplifiers, transportation and antenna systems, industrial installations, and premise...
Read More »
Latest VNA Cables Come with NMD-Style Connectors
Feature braided and stainless-steel armoring surrounding. Offer performance up to 70 GHz and can withstand 100,000 flexure cycles . Designed for wide range of demanding lab and test applications.
Read More »
New POE10GA-Series PoE Midspans Feature Shielded RJ45 Ports
Offers high-speed voice, video and data connectivity to IP enabled end devices. Support PoE, PoE+ and PoE++ applications and provide a fast way to supply power and data to IP enabled end devices. Works with a devices including network switches, digital signage, building, lighting and traffic control systems.
Read More »
New M12 Cables Offered with Male, Female and Right-angle Connector Combinations
Includes M12 to M12, M12 to RJ45 and M12 to cut-end options and metal armored versions. Features straight wire, Cat5e and Cat6a rated assemblies in IP67, IP68 and IP69K versions. Built to endure the harsh environments often found in factory automation, oil and gas, wastewater and process automation.
Read More »
New Integrated Power Systems are UL 60950-1 Certified
1 RU IPS features 45A/2.4kW power rating and four pre-populated load circuit breakers while 2 RU IPS features 180A/8.7kW power rating and five pre-populated load circuit breakers. Offer load controller with LCD touchscreen plus remote access and support Ethernet SNMPv3 communications. Rectify AC power and intelligently distribute to DC loads, with an advanced load controller.
Read More »
New NEMA-Rated Equipment Enclosures are Ideal for Indoor and Outdoor Installations
Offered in 14x12x06 in. and 18x16x10 in. sizes with off-the-shelf options that include 120 VAC and 240 VAC power, and DIN rail mounts. Feature stainless-steel latch with padlock eye, fully gasketed lids and wall mounting brackets. Constructed of UV-resistant, high-impact polycarbonate material that is suitable for use in corrosive and high temperature environments.
Read More »
New Bi-Phase Modulators with Maximum Peak RF Input Power of 0.5 W
Includes low insertion loss of 2.5 dB, fast switching speed of 40 nsec typ and low VSWR of 1.8:1 typ. Uses TTL logic to phase modulate data onto an RF carrier signal using 2 phase shift keying. Suitable for microwave radio, radar, high-data-rate test and measurement.
Read More »
New Field Replaceable RF Connectors with 2 and 4-Hole Mounting Configurations
Utilizes a metal ring that grounds or mates with the component ground and will work with a range of different pin sizes. Connector is attached to the wall of the component with screws and accepts the interface pin. Designed for use in various civil and military telecommunications, civil and military aeronautics applications.
Read More »
New CBRS Antenna Line Provides 360-degree Coverage with 8.5 dBi of Gain
Features 4 ports, +/- 45 slant polarization and covers the 3500-3800 MHz frequency bands. Comprised of two dual-polarized Omni arrays in a single radome enclosure with one mounting point. Ideal for 4-sector frequency reuse with 4x4 MIMO LTE equipment and CBRS deployments.
Read More »Infinite Electronics, Inc. Promotes David Quinn to Chief Revenue Officer
Quinn to Lead Global Revenue-Driving Organizations within Infinite Irvine, Calif. – Infinite Electronics, Inc., a leading global supplier of electronic components serving the urgent needs of engineers through a family of highly recognized and trusted brands, has appointed David Quinn to the position of Chief Revenue Officer. In this role, Quinn will lead Infinite’s global revenue-driving...
Read More »Infinite Electronics, Inc. Appoints Jason Koshy to Global Vice President of Sales
Koshy to Lead Global Sales Strategies and Focused Global Growth Plan IRVINE, Calif. – Infinite Electronics, Inc., a leading global supplier of electronic components serving the urgent needs of engineers through a family of highly recognized and trusted brands, has announced the promotion of Jason Koshy to Global Vice President of Sales. In this role, Koshy will lead all Infinite sales teams....
Read More »
