Pixus Technologies

Rugged Horizontal Rails handle high board insertion forces.
Architectural & Civil Engineering Products

Rugged Horizontal Rails handle high board insertion forces.

Featuring thick contact point and hardened design to protect against extreme forces, Rittal™ Enhanced Horizontal Rails meet IEC 60 297-3 and IEEE 1101.10 specifications. Units have .1 HP (horizontal pitch) hole pattern to allow precise installation of guide rails in various increments. Rails are standardly 84 HP without machining on end faces, and can be cut in any length. Combined with OpenVPX...

Read More »
MicroTCA Chassis (1U) supports PCIe Gen 3 speeds.
Architectural & Civil Engineering Products

MicroTCA Chassis (1U) supports PCIe Gen 3 speeds.

Available with multiple power options, includingÂ- dual redundant configuration, Pixus PXS0108 features 6 Advanced Mezzanine Card (AMC) slots and 1 MicroTCA Carrier Hub (MCH) slot. Active backplane, alleviating need for power modules, provides power manager controls and limits management and payload power to max allowed limit for each slot. PCIe Gen 3 brings backplane speed...

Read More »
Conduction-Cooled ATR Chassis meet military standards.
Architectural & Civil Engineering Products

Conduction-Cooled ATR Chassis meet military standards.

Available in ATR format or in specialty Small Form Factor designs, Conduction-Cooled Chassis support both OpenVPX and MicroTCA architectures. Units come in standard Â-½ and ¾ sizes for 3U or 6U boards. There are also options for MicroTCA.3 Hardened form factor as well as heat exchanged versions. Enclosures are designed to meet MIL-STD-704, MIL-STD-810G, and MIL-STD-461. For...

Read More »
Instrument Enclosures offer range of front panel/door options.
Architectural & Civil Engineering Products

Instrument Enclosures offer range of front panel/door options.

Available in 1U–4U sizes with several depths, widths, and configurations, modular Vario and RiPac Enclosures offer front doors with right, left, or bottom hinges, nearly all with lockable security option. Glass door for aluminum and sheet metal enclosure cases comes in smoked acrylic finish.Â- Rear filler panels/doors also come in various options, including versions with cutouts for 120 mm...

Read More »
AdvancedTCA Chassis (13U) offers backplane and PEM options.
Computer Hardware & Peripherals

AdvancedTCA Chassis (13U) offers backplane and PEM options.

Along with 40GbE backplane options to IEEE 40GBASE-KR4, PXS13X0 series AdvancedTCA (ATCA) chassis supports shelf manager options from VadaTech (VT003) and PigeonPoint (ShMM-700R). RiCool III fans options enable cooling ofÂ- over 300 W/slot while maintaining NEBS compliance and CPTA design guidelines. Also available, Power Entry Module (PEM) options include 100 A PEMs that have feeds limited...

Read More »
Double Rail Extrusions create rugged subracks.
Architectural & Civil Engineering Products

Double Rail Extrusions create rugged subracks.

Tested in railway applications for resistance to shock/vibration and ability to handle extreme loads, double rail extrusions with dual mounting provide modular framework for electronics enclosures. Mounting holes forÂ- second screw promote stability and strength for modular enclosure. Offered in front and rear versions and with various interfaces, extruded...

Read More »
OpenVPX Backplanes come in 3U and 6U configurations.
Electronic Components & Devices

OpenVPX Backplanes come in 3U and 6U configurations.

Compliant to VITA 65 specification, standard profile configurations for OpenVPX backplanes include 5-, 9-, and 18-slot 3UÂ- versions as well as 2- and 5-slot 6U versions. Each is available with or without rear I/O connectors and designed to cable over to Pixus power boards for VITA 62 or PICMG 2.11 power supplies. Header options are available for VITA 46.11 for system...

Read More »
NEBS-Compliant 15U ATCA Chassis exceeds 400 W/slot capability.
Computer Hardware & Peripherals

NEBS-Compliant 15U ATCA Chassis exceeds 400 W/slot capability.

Leveraging Kaparel design and reverse impeller hot-plug cartridges, 15U AdvancedTCA (ATCA) chassis provides at least 400 W/slot cooling capability while meeting all compliance criteria and recommended practices. Design meets NEBS requirements, includingÂ- ability to cool chassis with fan tray removed for 2 min, and remains within FCC acoustic requirements. Both 40 and 10 GbE...

Read More »
Power Interface Boards support VITA 62 power supplies.
Architectural & Civil Engineering Products

Power Interface Boards support VITA 62 power supplies.

Available in 3U and 6U heights in either single or dual PSU formats, Pixus VITA 62 Power Interface Boards feature header for voltage sense and IPMB for VITA 46.11 system management or other IPMI-based options. Units have several power bugs for 3.3, 5, and 12 V power as well as 26-pin header that accommodates general purpose I/O signals from PSUs. To optimize chassis cooling, breakaway tabs at...

Read More »

All Topics