Custom MMIC

Low Noise Amplifier operates from 10-14 GHz.
Communication Systems & Equipment

Low Noise Amplifier operates from 10-14 GHz.

Housed in leadless 3 x 3 mm plastic surface-mount package, Model CMD189P3 delivers greater than 19 dB of gain with corresponding output 1 dB compression point of +4 dBm and noise figure of 1.4 dB. Broadband MMIC device has 50 Ω matched design, which eliminates need for external DC blocks and RF port matching. Applications include point-to-point and point-to-multipoint radios, military end-use,...

Read More »
Double-Balanced Mixer offers high isolation, low conversion loss.
Agricultural & Farming Products

Double-Balanced Mixer offers high isolation, low conversion loss.

Supplied in SMT package, CMD177C3 offersÂ- 6.5 dB conversion loss, 45 dBc LO to RF isolation, and +18 dBm input IP3 across 6–14 GHz bandwidth. Minimum LO drive requirement is +9 dBm, with saturation reached at levels over +13 dBm, and IF bandwidth of DC to 5 GHz allows support of diverse frequency conversion plans. Supporting use in up-/down-converting...

Read More »
Active x2 Frequency Multiplier offers high output, low spur levels.
Electronic Components & Devices

Active x2 Frequency Multiplier offers high output, low spur levels.

Supplied in die form, CMD214 accepts 12–18 GHz input signals and provides output to second harmonic (24–36 GHz) at +17 dBm. Isolations to the fundamental and third harmonics are greater than 32 dBc and 25 dBc, respectively. Typical input drive level is +14 dBm, although multiplier will operate at levels as low as +11 dBm, and bias conditions are Vdd=5 V @ 40 mA, Vgg1 = -1.8 V, and Vgg2 = -0.8...

Read More »
GaN Low-Noise Amplifier features 23 dB gain.
Communication Systems & Equipment

GaN Low-Noise Amplifier features 23 dB gain.

Able to survive input power levels up to 5 W without front-end limiter, 4–8 GHz Model CMD219 features output of 1 dB, compression point of +18 dBm, and noise figure of 1.1 dB across operating bandwidth. Typical bias conditions are Vdd = 10 V at 100 mA and Vgg = -2.3 V, although Vdd can vary from 5–28 V. Suitable applications include point-to-point and point-to-multipoint radios, military and...

Read More »
SP4T Non-Reflective Switch works over broad frequency range.
Electrical Equipment & Systems

SP4T Non-Reflective Switch works over broad frequency range.

Available in die form, DC–20 GHz CMD203 features 2.4 dB insertion loss and 39 dB at 10 GHz isolation. Switching speed is 66 nsec, input P1dB is +20 dBm, and input IP3 is +30 dBm. Inclusion of on-board binary decoder circuit reduces number of required logic control lines to 2, and each single-ended control line requires logic levels of 0/-5 V. Consuming 4.5 mA of DC current overall, switch suits...

Read More »
Non-Reflective SPDT Switch covers DC to 28 GHz.
Electrical Equipment & Systems

Non-Reflective SPDT Switch covers DC to 28 GHz.

Supplied in die form, Model CMD196 features low insertion loss of 1.75 dB, high isolation of 46 dB, and port return losses better than -15 dB at 14 GHz. Pair of complimentary voltage lines at 0/-5 V control switching action without need for external bias supply. With typical switching speed of 1.8 nS, general-purpose broadband switch is suited for microwave radio and VSAT, telecom infrastructure,...

Read More »
Driver Amplifier delivers 21 dB gain across 6-16 GHz bandwidth.
Communication Systems & Equipment

Driver Amplifier delivers 21 dB gain across 6-16 GHz bandwidth.

Operating fromÂ- single positive supply voltage of +5.0 V @ 95 mA, CMD158C4 delivers 21 dB of gain across its bandwidth while providing +21 dBm of saturated output power at PAE of 24%. This 6–16 GHz driver amplifier comes in Pb-free, RoHs-compliant, ceramic, 4 x 4 mm QFN SMD package and does not require any external components for operation except bypass capacitors...

Read More »

All Topics