EasySYNC, Ltd.

USB-to-RS422/RS485 Adapters offer 10 kV ESD protection.
Electrical Equipment & Systems

USB-to-RS422/RS485 Adapters offer 10 kV ESD protection.

Offering plug-and-play installation, single-port Model ES-U-2001-S incorporates automatic transmit and receive control for 2-wire RS485 half-duplex mode. ModelÂ- ES-U-2001-STB has same features and functionality, but with 5-pin terminal block connector included which facilitates wiring process. Suitable for connection with either USB 1.1 or 2.0 hosts, adapters' high-speed serial...

Read More »
EasySYNC Announces Powerful Software Support Environment for its Latest USB Instruments
Laboratory and Research Supplies and Equipment

EasySYNC Announces Powerful Software Support Environment for its Latest USB Instruments

To complement its recently updated USB-based test equipment range, EasySYNC Ltd has introduced a comprehensive suite of sophisticated software packages. These offer a compelling combination of ease-of-use, breadth of diagnostic functionality and operational flexibility. With versions available that are suitable for Windows and MAC operating systems, the EasyScope III software is designed to be...

Read More »
Logic/Protocol Analyzer features USB-powered design.
Laboratory and Research Supplies and Equipment

Logic/Protocol Analyzer features USB-powered design.

Measuring 40 x 10 x 53 mm, Model ES-DLA-8/16 offers 8 or 16 data acquisition channels, max sampling rate of 60 MHz run length encoding or 4-bit raw, and external clock input. Unit supports rising edge, falling edge, high level, and low level triggering modes for analysis flexibility. Pre-trigger mode enables position of trigger in acquired data to be set at 0, 25, 50, 75, or 100% buffer. When...

Read More »
Multi-Function Instrument operates via USB.
Laboratory and Research Supplies and Equipment

Multi-Function Instrument operates via USB.

Combining oscilloscope, data logger, spectrum analyzer, voltmeter, and frequency meter in single product, dual-channel Model DS60M10 offers 10-/8-bit data streaming simultaneously on both channels. Oscilloscope supports speeds of 60 Hz, while data logger provides sampling rate up to 1 KS/s, and analog inputs of voltmeter have max range of ±50 Vdc. Measuring 116 x 30 x 100 mm, USB-based unit...

Read More »
USB to RS232/422/485 Adapters come in rugged enclosure.
Electrical Equipment & Systems

USB to RS232/422/485 Adapters come in rugged enclosure.

Rugged adapter modules allow legacy serial devices to interface with interconnect ports based on USB technology. Supporting max data rates of 1 Mbps for each port, USB2-H-100X-M series interfaces with RS232 level I/Os. Products of USB2-H-500X-M and USB2-H-600X-M series respectively interface with RS485 and RS422 level I/Os and support data rates to 8 Mbps per port. Supplied in metal enclosures,...

Read More »
Electrical Equipment & Systems

EasySYNC Partners with Mouser Electronics

Channel agreement brings worldwide support to USB solutions provider London - EasySYNC Ltd, a specialist in USB communications and supplier of USB instruments, has finalized a global distribution deal with Mouser Electronics. Through the deal Mouser will help EasySYNC to build stronger relationships with the global electronics design community, offering immediate access to an expansive inventory,...

Read More »
USB-to-CAN Adapters offer plug-and-play installation.
Electrical Equipment & Systems

USB-to-CAN Adapters offer plug-and-play installation.

Powered directly from USB connection, non-isolated Model USB2-F-7001 and digitally isolated Model USB2-F-7101 connect CAN bus devices to PC via USB. Each adapter integrates USB-to-FIFO interface IC, CAN controller, and CAN bus transceiver. CAN bus signals are output to DE-9P connector conforming to CAN-in-Automation DS102-2 pin-out, and max CAN bus data rate is 1 Mbps. Operating from -40 to...

Read More »
USB-to-CAN Adapters connect CAN bus devices to PC.
Electrical Equipment & Systems

USB-to-CAN Adapters connect CAN bus devices to PC.

Powered directly from USB connection, both non-isolated USB2-F-7001 and USB2-F-7101 with built-in digital isolation enable connection of CAN bus devices to PCs via USB. Plastic enclosure features USB type-B socket, allowing adapter to be connected to Host type-A socket using provided cable. Both models integrate USB-to-FIFO interface IC, CAN controller, and CAN bus transceiver and are compatible...

Read More »
USB-to-RS422/RS485 Adapters offer 10 kV ESD protection.
Electrical Equipment & Systems

USB-to-RS422/RS485 Adapters offer 10 kV ESD protection.

Offering plug-and-play installation, single-port Model ES-U-2001-S incorporates automatic transmit and receive control for 2-wire RS485 half-duplex mode. ModelÂ- ES-U-2001-STB has same features and functionality, but with 5-pin terminal block connector included which facilitates wiring process. Suitable for connection with either USB 1.1 or 2.0 hosts, adapters' high-speed serial...

Read More »
EasySYNC Announces Powerful Software Support Environment for its Latest USB Instruments
Laboratory and Research Supplies and Equipment

EasySYNC Announces Powerful Software Support Environment for its Latest USB Instruments

To complement its recently updated USB-based test equipment range, EasySYNC Ltd has introduced a comprehensive suite of sophisticated software packages. These offer a compelling combination of ease-of-use, breadth of diagnostic functionality and operational flexibility. With versions available that are suitable for Windows and MAC operating systems, the EasyScope III software is designed to be...

Read More »
Logic/Protocol Analyzer features USB-powered design.
Laboratory and Research Supplies and Equipment

Logic/Protocol Analyzer features USB-powered design.

Measuring 40 x 10 x 53 mm, Model ES-DLA-8/16 offers 8 or 16 data acquisition channels, max sampling rate of 60 MHz run length encoding or 4-bit raw, and external clock input. Unit supports rising edge, falling edge, high level, and low level triggering modes for analysis flexibility. Pre-trigger mode enables position of trigger in acquired data to be set at 0, 25, 50, 75, or 100% buffer. When...

Read More »
Multi-Function Instrument operates via USB.
Laboratory and Research Supplies and Equipment

Multi-Function Instrument operates via USB.

Combining oscilloscope, data logger, spectrum analyzer, voltmeter, and frequency meter in single product, dual-channel Model DS60M10 offers 10-/8-bit data streaming simultaneously on both channels. Oscilloscope supports speeds of 60 Hz, while data logger provides sampling rate up to 1 KS/s, and analog inputs of voltmeter have max range of ±50 Vdc. Measuring 116 x 30 x 100 mm, USB-based unit...

Read More »
USB to RS232/422/485 Adapters come in rugged enclosure.
Electrical Equipment & Systems

USB to RS232/422/485 Adapters come in rugged enclosure.

Rugged adapter modules allow legacy serial devices to interface with interconnect ports based on USB technology. Supporting max data rates of 1 Mbps for each port, USB2-H-100X-M series interfaces with RS232 level I/Os. Products of USB2-H-500X-M and USB2-H-600X-M series respectively interface with RS485 and RS422 level I/Os and support data rates to 8 Mbps per port. Supplied in metal enclosures,...

Read More »
Electrical Equipment & Systems

EasySYNC Partners with Mouser Electronics

Channel agreement brings worldwide support to USB solutions provider London - EasySYNC Ltd, a specialist in USB communications and supplier of USB instruments, has finalized a global distribution deal with Mouser Electronics. Through the deal Mouser will help EasySYNC to build stronger relationships with the global electronics design community, offering immediate access to an expansive inventory,...

Read More »
USB-to-CAN Adapters offer plug-and-play installation.
Electrical Equipment & Systems

USB-to-CAN Adapters offer plug-and-play installation.

Powered directly from USB connection, non-isolated Model USB2-F-7001 and digitally isolated Model USB2-F-7101 connect CAN bus devices to PC via USB. Each adapter integrates USB-to-FIFO interface IC, CAN controller, and CAN bus transceiver. CAN bus signals are output to DE-9P connector conforming to CAN-in-Automation DS102-2 pin-out, and max CAN bus data rate is 1 Mbps. Operating from -40 to...

Read More »
USB-to-CAN Adapters connect CAN bus devices to PC.
Electrical Equipment & Systems

USB-to-CAN Adapters connect CAN bus devices to PC.

Powered directly from USB connection, both non-isolated USB2-F-7001 and USB2-F-7101 with built-in digital isolation enable connection of CAN bus devices to PCs via USB. Plastic enclosure features USB type-B socket, allowing adapter to be connected to Host type-A socket using provided cable. Both models integrate USB-to-FIFO interface IC, CAN controller, and CAN bus transceiver and are compatible...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers