Equilibar
Fletcher, NC 28732
New Single Use Pressure Control Valve is Designed for BioPharma
Equilibar’s Single Use Pressure Control Valve comes with dome-loaded multiple orifice technology for instantaneous control, frictionless operation and range of flow rates. The unit is suitable in controlling transmembrane pressure in tangential flow filtration control applications. Valve’s diaphragm and wetted components are inserted into stainless steel for quick assembly.
Read More »
Equilibar releases miniature back pressure regulator.
Small, low volume BPR is designed for catalytic research, multiple reactor systems, and gas chromatography. Unit is available in 1/16 size ports with maximum flow coefficient (Cv) of 0.01 and a diameter less than 40 mm. Back Pressure Regulator performs across wide range of flow rates.
Read More »
Electronic Pressure Controller handles up to 3000 psig.
Intended- for static or low-flow applications of non-corrosive gases, EPR-3000 controls pressure within- closed system or in applications with small constant flow rates and provides pilot signal for dome-loaded regulators in high-pressure applications. Design- has dual proportional valve construction and does not bleed gas when at- steady state pressure. While electronic control is available...
Read More »
Tantalum Coated Regulators offer corrosion resistance.
With base parts typically made of stainless steel, Tantalum-coated Back Pressure Regulators withstand applications involving extreme chemistries. Regulators do not have any reciprocating shafts, valve members, or pistons because design uses flexible diaphragm membrane to both sense controlled pressure and to directly form valve seal against multiple parallel orifices. Diaphragm may be constructed...
Read More »
Vacuum Regulators are available in anodized aluminum.
Equilibar's technology for maintaining vacuum pressure despite challenging variable conditions is now available in durable and lightweight anodized aluminum. This new construction offers a lower cost option for economically minded applications needing a vacuum regulator to maintain pressure as flow rates change or vacuum supply varies. Previously, Equilibar vacuum regulators were available only...
Read More »
Pilot Operated Vacuum Regulator supports high flows.
Manufactured from SS304L or SS316L, HV comes in- 2, 4, and 6 in. port sizes and offers pilot operation. Latter- enables automatic response for accurate regulation- of system vacuum in precise 1:1 relationship with applied pilot vacuum set point. Only moving part, membrane diaphragm, directly creates seal against field of small orifices. Dynamic seals have no internal friction to overcome,...
Read More »
Back Pressure Regulator has blockage-resistant design.
Available in pressure ranges up to 5,000 psi (standard trim) and 10,000 psi (high-pressure trim), BR series does not require heating to maintain pressure control. All-mechanical design eliminates ability of oil and ice to cling to internal passages of regulator, and control valve is pilot operated. Pilot pressure can be controlled using- manually operated knob adjusted pressure regulator or...
Read More »
Back Pressure Regulators act as drop-in Mity Mite replacements.
Drop-in replacement regulators are available for models of Mity Mite back pressure regulators, which are suited for applications in oil and gas industry due to materials of construction and low flow capabilities but are no longer commercially available. Replacements for several models of Mity Mite back pressure regulators follow same part number scheme with EQ appended to end.
Read More »
PTFE Regulator can withstand high pressures.
Designed to use a flexible, frictionless diaphragm as the only moving part, Equilibar back pressure regulators are able to accurately maintain pressure over a wide range of flow rates, including high flow rates. Now this novel design is available for applications requiring PTFE (Teflon) wetted parts. The machined Teflon-© body can use 1/8″ and 1/16″ PTFE tubing and is rated to 250 psig and...
Read More »
Back Pressure Regulator withstands aggressive chemicals.
Available with -½–2 in. port sizes, Equilibar-© Back Pressure Regulator utilizes flexible diaphragm as only moving part. Body is CNC-machined from PVDF bar stock, while diaphragm is manufactured from glass matrix reinforced PTFE material. Diaphragm acts to directly seal against valve seat, eliminating need for friction-causing dynamic seals. With response time measured in milliseconds, pilot...
Read More »
New Single Use Pressure Control Valve is Designed for BioPharma
Equilibar’s Single Use Pressure Control Valve comes with dome-loaded multiple orifice technology for instantaneous control, frictionless operation and range of flow rates. The unit is suitable in controlling transmembrane pressure in tangential flow filtration control applications. Valve’s diaphragm and wetted components are inserted into stainless steel for quick assembly.
Read More »Equilibar Earns ISO 9001:2015 Certification
Fletcher, NC - October 10, 2017 - Equilibar Precision Pressure Control is proud to announce that it has been awarded ISO 9001:2015 certification. This milestone continues the company’s commitment to providing pressure regulators of the highest quality to clients in research and industry around the world. The ISO standard, which was developed by the International Organization for...
Read More »
Equilibar releases miniature back pressure regulator.
Small, low volume BPR is designed for catalytic research, multiple reactor systems, and gas chromatography. Unit is available in 1/16 size ports with maximum flow coefficient (Cv) of 0.01 and a diameter less than 40 mm. Back Pressure Regulator performs across wide range of flow rates.
Read More »Equilibar is Honored to Announce a New Partnership with Thermal and Fluids Solutions Group of Stafford, Virginia
April 6, 2017--Equilibar is honored to announce a new partnership with Thermal and Fluids Solutions Group of Stafford, Virginia. TFSG specializes in advanced two-phase flow and heat transfer systems, including refrigeration, Rankine cycles and open power cycles. They have extensive experience in alternative energy technology, especially Ocean Thermal Energy Conversion. “TFSG’s focus...
Read More »Equilibar Announces Partnership with TFSG to Expand Thermal and Refrigeration Offerings
Equilibar is excited to announce a new partnership with Thermal and Fluids Solutions Group of Stafford, Virginia. TFSG specializes in advanced two-phase flow and heat transfer systems, including refrigeration, Rankine cycles and open power cycles. They have extensive experience in alternative energy technology, especially Ocean Thermal Energy Conversion. “TFSG’s focus complements...
Read More »
Electronic Pressure Controller handles up to 3000 psig.
Intended- for static or low-flow applications of non-corrosive gases, EPR-3000 controls pressure within- closed system or in applications with small constant flow rates and provides pilot signal for dome-loaded regulators in high-pressure applications. Design- has dual proportional valve construction and does not bleed gas when at- steady state pressure. While electronic control is available...
Read More »
Tantalum Coated Regulators offer corrosion resistance.
With base parts typically made of stainless steel, Tantalum-coated Back Pressure Regulators withstand applications involving extreme chemistries. Regulators do not have any reciprocating shafts, valve members, or pistons because design uses flexible diaphragm membrane to both sense controlled pressure and to directly form valve seal against multiple parallel orifices. Diaphragm may be constructed...
Read More »Equilibar Precision Pressure Control Doubles Production Area
Western North Carolina Company Provides Novel Fluid Control Technology for Research and Industry Fletcher, NC- – Equilibar Precision Pressure Control, a technology and manufacturing company headquartered in Western North Carolina, has doubled the size of its production area. Equilibar focuses on custom-designed fluid control products that are hand assembled, inspected and performance tested in...
Read More »
Vacuum Regulators are available in anodized aluminum.
Equilibar's technology for maintaining vacuum pressure despite challenging variable conditions is now available in durable and lightweight anodized aluminum. This new construction offers a lower cost option for economically minded applications needing a vacuum regulator to maintain pressure as flow rates change or vacuum supply varies. Previously, Equilibar vacuum regulators were available only...
Read More »
Pilot Operated Vacuum Regulator supports high flows.
Manufactured from SS304L or SS316L, HV comes in- 2, 4, and 6 in. port sizes and offers pilot operation. Latter- enables automatic response for accurate regulation- of system vacuum in precise 1:1 relationship with applied pilot vacuum set point. Only moving part, membrane diaphragm, directly creates seal against field of small orifices. Dynamic seals have no internal friction to overcome,...
Read More »