Newport Corporation

Ultraviolet Beam Viewer features 48.3 mm, clear aperture.
Health, Medical, & Dental Supplies and Equipment

Ultraviolet Beam Viewer features 48.3 mm, clear aperture.

Placed into path of UV laser, optically clear UVU-2A enables observation of such beam characteristics as laser mode structure, beam shape, and beam alignment. Optical glass of clean-room-compatible UV beam viewer glows white green when exposed to UV radiation, and useful wavelength rangeÂ- is 193–355 nm. While 5 mm profile allows insertion into tight optical setups, housing provides...

Read More »
Services

Newport Announces New PV Wafer Testing Capability

• The Technology & Applications Center’s Photovoltaic Lab now offers solar wafer testing on cells up to 156 mm x 156 mm. Irvine, CA – Newport Corporation, a worldwide leader in laser and photonic solutions that Make, Manage and Measure LightÂ-®, is pleased to announce expandedÂ-  capabilities that include solar wafer testing and calibration for bare cells up to 156 mm x 156...

Read More »
Universal Motion Controller/Driver offers 10 KHz DAQ rates.
Agricultural & Farming Products

Universal Motion Controller/Driver offers 10 KHz DAQ rates.

Available in 2-, 4-, 6- and 8-axis configurations, XPS-Qx series is based on QNX RTOS, offers intuitive Web interface,Â- and comes with firmware and dual-core processor. Integrated solution,Â- providing high-speed communicationÂ- via 10/100 Base-T Ethernet, accommodates applications from simple motion sequences to complex synchronization that require precision control. I/O options...

Read More »
Linear Stages target surface metrology applications.
Communication Systems & Equipment

Linear Stages target surface metrology applications.

Available in 100, 200, and 300 mm models with all-steel construction, FMSxxHA Series combines high stiffness and thermal stability for precise and repeatable measurements.Â- Units have precision-ground, steel ball screw for high-speed motion, and crossed roller bearings with anti-creep feature, minimizing measurement noise and variability. Stages are driven by stepper motor, with linear...

Read More »
Parallel Kinematic Positioning System provides 6-axes of motion.
Communication Systems & Equipment

Parallel Kinematic Positioning System provides 6-axes of motion.

With no moving cables or accumulation of errors, HXP50 hexapod serves motion applications requiring complex combinations of rotation and linear motion, high load capacity, and repeatability in up to 6 independent axes: X, Y, Z, pitch, roll, and yaw. System, driven by 6 DC servo-motor-driven actuators with encoder feedback at lead screw nut, offers 2 virtual and programmable pivot points. It can...

Read More »
Newport Announces the Industry's First Family of Air Bearing Stages for 450mm Wafer Initiative - DynamYX-® Datum TM 450 and 450GT
Communication Systems & Equipment

Newport Announces the Industry's First Family of Air Bearing Stages for 450mm Wafer Initiative - DynamYX-® Datum TM 450 and 450GT

Newport Corporation, a worldwide leader in advanced motion control solutions, introduces the industry's premier line of high-performance air bearing stages specifically designed for the 450mm semiconductor wafer initiative. The new DynamYXÂ-® Datum(TM) 450 and 450GT are based on Newport's proven DynamYX 300-series wafer processing and inspection platforms with more than 1,000 worldwide...

Read More »
Achromatic Wave Plates offer half or quarter wave retardance.
Materials

Achromatic Wave Plates offer half or quarter wave retardance.

Featuring 23 nm clear apertures, Achromatic Zero-Order Quartz-MgF2 Wave Plates consist of 2 different birefringent crystals - crystalline quartz and magnesium fluoride - each with broadband antireflection coating, in air-spaced design. Units operate in spectral wavelengths from 610-850 nm or 700-1,000 nm. Mounted in black, anodized aluminum housing for protection, wave plates maintain retardation...

Read More »
G-Code Conversion Software supports laser machining.
Software

G-Code Conversion Software supports laser machining.

Designed to work with XPS Universal Motion Controller, XPS-GCODE Conversion Software can read, convert, and edit G-code and execute in controller. Software utilizes advanced features of XPS to turn controller into laser machining center. Providing 3D display with real-time active tool indicator, software generates smooth motion routines along optimized trajectories with controlled velocity. For...

Read More »
Integrating Sphere Detectors measure up to 10 W optical power.
Sensors, Monitors & Transducers

Integrating Sphere Detectors measure up to 10 W optical power.

Ranging in size from 2-5.3 in., Series 819C/D is calibrated, NIST-traceable, and available for diverging/collimated input beams. Spheres use 3 sensor materials: Si for 400-1,100 nm detection, UV-enhanced Si for 200-400 nm, and InGaAs for 800-1,650 nm wavelength range. Featuring built-in temperature sensor and OD1 attenuator sensor, CAL2 models automatically recognize attenuator on/off position...

Read More »
Mergers & Acquisitions

Newport Corporation Enters Into Agreement to Acquire FEMTOLASERS

Acquisition Expected to Be Accretive and Extend Newport's Leadership in Ultrafast Lasers IRVINE, Calif. –Â- Newport Corporation (NASDAQ: NEWP) today announced that it has entered into an agreement to acquire FEMTOLASERS Produktions GmbH, a leading developer and manufacturer of ultrafast laser systems used extensively in scientific and biomedical research applications. Widely recognized for...

Read More »
Ultraviolet Beam Viewer features 48.3 mm, clear aperture.
Health, Medical, & Dental Supplies and Equipment

Ultraviolet Beam Viewer features 48.3 mm, clear aperture.

Placed into path of UV laser, optically clear UVU-2A enables observation of such beam characteristics as laser mode structure, beam shape, and beam alignment. Optical glass of clean-room-compatible UV beam viewer glows white green when exposed to UV radiation, and useful wavelength rangeÂ- is 193–355 nm. While 5 mm profile allows insertion into tight optical setups, housing provides...

Read More »
Services

Newport Announces New PV Wafer Testing Capability

• The Technology & Applications Center’s Photovoltaic Lab now offers solar wafer testing on cells up to 156 mm x 156 mm. Irvine, CA – Newport Corporation, a worldwide leader in laser and photonic solutions that Make, Manage and Measure LightÂ-®, is pleased to announce expandedÂ-  capabilities that include solar wafer testing and calibration for bare cells up to 156 mm x 156...

Read More »
Universal Motion Controller/Driver offers 10 KHz DAQ rates.
Agricultural & Farming Products

Universal Motion Controller/Driver offers 10 KHz DAQ rates.

Available in 2-, 4-, 6- and 8-axis configurations, XPS-Qx series is based on QNX RTOS, offers intuitive Web interface,Â- and comes with firmware and dual-core processor. Integrated solution,Â- providing high-speed communicationÂ- via 10/100 Base-T Ethernet, accommodates applications from simple motion sequences to complex synchronization that require precision control. I/O options...

Read More »
Linear Stages target surface metrology applications.
Communication Systems & Equipment

Linear Stages target surface metrology applications.

Available in 100, 200, and 300 mm models with all-steel construction, FMSxxHA Series combines high stiffness and thermal stability for precise and repeatable measurements.Â- Units have precision-ground, steel ball screw for high-speed motion, and crossed roller bearings with anti-creep feature, minimizing measurement noise and variability. Stages are driven by stepper motor, with linear...

Read More »
Parallel Kinematic Positioning System provides 6-axes of motion.
Communication Systems & Equipment

Parallel Kinematic Positioning System provides 6-axes of motion.

With no moving cables or accumulation of errors, HXP50 hexapod serves motion applications requiring complex combinations of rotation and linear motion, high load capacity, and repeatability in up to 6 independent axes: X, Y, Z, pitch, roll, and yaw. System, driven by 6 DC servo-motor-driven actuators with encoder feedback at lead screw nut, offers 2 virtual and programmable pivot points. It can...

Read More »
Newport Announces the Industry's First Family of Air Bearing Stages for 450mm Wafer Initiative - DynamYX-® Datum TM 450 and 450GT
Communication Systems & Equipment

Newport Announces the Industry's First Family of Air Bearing Stages for 450mm Wafer Initiative - DynamYX-® Datum TM 450 and 450GT

Newport Corporation, a worldwide leader in advanced motion control solutions, introduces the industry's premier line of high-performance air bearing stages specifically designed for the 450mm semiconductor wafer initiative. The new DynamYXÂ-® Datum(TM) 450 and 450GT are based on Newport's proven DynamYX 300-series wafer processing and inspection platforms with more than 1,000 worldwide...

Read More »
Achromatic Wave Plates offer half or quarter wave retardance.
Materials

Achromatic Wave Plates offer half or quarter wave retardance.

Featuring 23 nm clear apertures, Achromatic Zero-Order Quartz-MgF2 Wave Plates consist of 2 different birefringent crystals - crystalline quartz and magnesium fluoride - each with broadband antireflection coating, in air-spaced design. Units operate in spectral wavelengths from 610-850 nm or 700-1,000 nm. Mounted in black, anodized aluminum housing for protection, wave plates maintain retardation...

Read More »
G-Code Conversion Software supports laser machining.
Software

G-Code Conversion Software supports laser machining.

Designed to work with XPS Universal Motion Controller, XPS-GCODE Conversion Software can read, convert, and edit G-code and execute in controller. Software utilizes advanced features of XPS to turn controller into laser machining center. Providing 3D display with real-time active tool indicator, software generates smooth motion routines along optimized trajectories with controlled velocity. For...

Read More »

All Topics