Broadcom Corp.
San Jose, CA 95131
Share:
Automotive GNSS Connectivity Chip surpasses AEC-Q100 requirements.
Integrating sensor hub and CPU on one chip for minimized power consumption and BOM, BCM89774 provides location and positioning for in-vehicle applications. Wideband capture radio technology offers simultaneous tri-band reception of all visible GNSS satellites, including GPS, GAL, QZSS, GLONASS, BDS, and SBAS augmentation systems. Functionality also improves positioning in dense urban environments...
Read More »Wi-Fi/Bluetooth Combo Chip extends battery life.
Intended for mobile platforms and accessories, Model BCM43012 enables OEMs to integrate Wi-Fi into applications that have traditionally been powered by Bluetooth alone due to battery size or constrained power budgets. Highly-integrated 28 nm dual-band 802.11n and Bluetooth 4.2 SoC combines power amplifiers, low noise amplifiers, and power management unit. WLAN features include optimized proximity...
Read More »Router Processor targets IoT and smart home applications.
Equipped with 1.8 GHz, 64-bit quad-core ARM CPU, Model BCM4908 uses Broadcom's Runner™ network packet processor to deliver more than 5 Gbps of system data throughput without taxing CPU. Device features integrated SATA III, 2 USB 3.0 ports, and 3 PCIe Gen 2 ports, as well as 2.5 Gb Base-X Ethernet WAN/LAN port for supporting fast connectivity to multi-gigabit modem or Network Attached Storage...
Read More »Wireless MCU SoCs target IoT applications.
Providing simultaneous multi-protocol support, WICED-® CORE- ELP- Series utilizes ARM Cortex CM4 MCU with FPU and DSP extensions and clock speed up to 100 MHz. Devices feature 512 KB RAM for complex applications, 1 MB flash memory for program and data storage, and integrated Bluetooth, Bluetooth Smart, and Zigbee 3.0 software stacks. With support for UART, SPI, Quad-SPI, and Serial Control...
Read More »Ethernet Switches drive enterprise adoption of 2.5 GbE.
For wired enterprises, BCM56160 adds 2.5 GbE access point connections to 24- and 48-port Gigabit Ethernet form factors, integrates 10 Gigabit interfaces for fiber uplinks, and delivers double stacking bandwidth. For all-wireless office built primarily on Wi-Fi access points, BCM56060 is optimized for 802.11ac Wave 2 enterprise environments and provides multi-mode 1 GbE/2.5 GbE Ethernet interfaces...
Read More »Automotive-Qualified Ethernet Switch establishes secure network.
With integrated PHYs, BroadR-Reach-® BCM8953x series enables automotive manufacturers to address bandwidth concerns, ensure standards compliance, and- secure network for connected car applications. Architecture supports non-blocking, line-rate data transfer at wire speed performance for all frame sizes over unshielded single-pair twisted cable. Based on 28 nm design, switch integrates low pass...
Read More »SoCs support VDSL2 35b and G.fast bonding.
For Fiber to the Cabinet architectures, BCM63138 integrated residential gateway and BCM65235 Central Office DSP support VDSL2 35b protocol, which increases aggregate DSL performance by up to 100%, without disturbing widely-deployed G.Vector crosstalk cancellation technology. BCM65244 Central Office DSP and BCM65249 bonded CPE PHY device support G.fast bonding standard. By aggregating multiple...
Read More »Wireless Connectivity Chips address automotive IoT demand.
Targeting car makers and tier one integrators, both BCM89359 5G WiFi/Bluetooth Smart 2X2 MIMO Combo Chip with RSDB Support and BCM89072 Tri-mode Bluetooth Smart v4.2 SoC deliver high-speed connectivity within and beyond vehicle. These automotive-grade wireless connectivity chips, featuring 5G Wi-Fi-® and Bluetooth-® Smart technology, specifically provide Internet, cloud applications, and...
Read More »GNSS Chip supports IoT and wearable devices.
By calculating position, velocity, and time on-chip, Model BCM47748 removes bulk of signal processing from device MCU. Chip uses intelligent firmware to extend battery life while also maintaining accuracy in speed, distance, and position for optimized user experience. Housed in 70-ball WLBGA package with 0.4 mm ball pitch, device can produce GNSS fixes with only 5 mA current consumption in...
Read More »DOCSIS 3.1-Compliant Devices foster multi-Gigabit delivery.
BCM3047, BCM31442 and BCM3222 enable Converged Cable Access Platform (CCAP) vendors to build and deploy DOCSIS 3.1-compliant equipment that supports multiple Gigabit cable broadband speeds over coax. While BCM31442 upstream burst receiver integrates ADC supporting up to 300 MHz upstream spectrum,- BCM3047 single-chip downstream transmitter integrates DAC enabling transmission out to 1.2 GHz in...
Read More »Broadcom Inc. Announces Senior Leadership Appointments to Drive Continued Growth and Success
Tom Krause to Become President of Infrastructure Software Group San Jose, Calif., Dec. 10, 2020 /PRNewswire/ -- Broadcom Inc. (Nasdaq: AVGO), a global technology leader that designs, develops and supplies semiconductor and infrastructure software solutions, today announced the following senior leadership appointments, effective immediately, reporting to Hock Tan, President and Chief Executive...
Read More »Broadcom Unveils Portfolio for RDK Video Accelerator Program
RDK powered chipsets enable CPE manufacturers to substantially speed up deployment cycles for service providers Chipsets pre-integrated with latest RDK Application Framework and Metrological App Store Advanced content and data security protection with available real-time cloud monitoring Amsterdam, September 10, 2019 – In advance of the IBC 2019 Conference, RDK Management and Broadcom...
Read More »Broadcom Joins Semiconductor Industry Association
Chief Legal Officer Mark Brazeal expected to be elected to SIA board of directors WASHINGTON, Jan. 31, 2019 /PRNewswire/ -- The Semiconductor Industry Association (SIA), representing U.S. leadership in semiconductor manufacturing, design, and research, today announced the addition of Broadcom Inc. (NASDAQ: AVGO) as an SIA member. Broadcom Chief Legal Officer Mark Brazeal is expected to be...
Read More »AirTies Collaborates with Broadcom on Wi-Fi 6 for Broadband Service Providers Worldwide
AirTies’ Smart Wi-Fi software and cloud management software will be pre-integrated into Broadcom Wi-Fi 6 platforms for use in third-party gateways AirTies’ Mesh extenders will be powered by Broadcom Wi-Fi 6 chipsets Istanbul – December 20, 2018 – Ahead of CES® 2019, AirTies, the most widely deployed provider of managed in-home Wi-Fi solutions to global service providers, today...
Read More »Broadcom Files Preliminary Proxy Materials in Connection with Qualcomm's 2018 Annual Meeting and Files Hart-Scott-Rodino Notification Regarding Proposed Acquisition of Qualcomm
SAN JOSE, Calif., Dec. 11, 2017 - Broadcom Limited (NASDAQ: AVGO) ( Broadcom ) today announced that it has filed preliminary proxy materials with the Securities and Exchange Commission ( SEC ) in connection with its planned solicitation of proxies to elect 11 independent, highly qualified nominees to the Qualcomm Incorporated (NASDAQ: QCOM) ( Qualcomm ) Board of Directors at Qualcomm's 2018...
Read More »Automotive GNSS Connectivity Chip surpasses AEC-Q100 requirements.
Integrating sensor hub and CPU on one chip for minimized power consumption and BOM, BCM89774 provides location and positioning for in-vehicle applications. Wideband capture radio technology offers simultaneous tri-band reception of all visible GNSS satellites, including GPS, GAL, QZSS, GLONASS, BDS, and SBAS augmentation systems. Functionality also improves positioning in dense urban environments...
Read More »Wi-Fi/Bluetooth Combo Chip extends battery life.
Intended for mobile platforms and accessories, Model BCM43012 enables OEMs to integrate Wi-Fi into applications that have traditionally been powered by Bluetooth alone due to battery size or constrained power budgets. Highly-integrated 28 nm dual-band 802.11n and Bluetooth 4.2 SoC combines power amplifiers, low noise amplifiers, and power management unit. WLAN features include optimized proximity...
Read More »Router Processor targets IoT and smart home applications.
Equipped with 1.8 GHz, 64-bit quad-core ARM CPU, Model BCM4908 uses Broadcom's Runner™ network packet processor to deliver more than 5 Gbps of system data throughput without taxing CPU. Device features integrated SATA III, 2 USB 3.0 ports, and 3 PCIe Gen 2 ports, as well as 2.5 Gb Base-X Ethernet WAN/LAN port for supporting fast connectivity to multi-gigabit modem or Network Attached Storage...
Read More »Wireless MCU SoCs target IoT applications.
Providing simultaneous multi-protocol support, WICED-® CORE- ELP- Series utilizes ARM Cortex CM4 MCU with FPU and DSP extensions and clock speed up to 100 MHz. Devices feature 512 KB RAM for complex applications, 1 MB flash memory for program and data storage, and integrated Bluetooth, Bluetooth Smart, and Zigbee 3.0 software stacks. With support for UART, SPI, Quad-SPI, and Serial Control...
Read More »Ethernet Switches drive enterprise adoption of 2.5 GbE.
For wired enterprises, BCM56160 adds 2.5 GbE access point connections to 24- and 48-port Gigabit Ethernet form factors, integrates 10 Gigabit interfaces for fiber uplinks, and delivers double stacking bandwidth. For all-wireless office built primarily on Wi-Fi access points, BCM56060 is optimized for 802.11ac Wave 2 enterprise environments and provides multi-mode 1 GbE/2.5 GbE Ethernet interfaces...
Read More »