Perle Systems, Inc.
Suite 108
Nashville, TN 37210

Ariane Medical Use Perle WiFi Device Servers to Make Their Papillon+ Cancer Treatment System Wireless and Portable
IOLAN WiFi Device Servers provide a safe and secure way to transmit serial RS232 data over WiFi Princeton, N.J. (Jan. 19, 2021) Ariane Medical Systems have been delivering ground-breaking cancer radiation treatment for over 10 years. Mark Davies, Sales Manager at Ariane Medical Systems, explains, “The type of non-surgical radiotherapy that we specialize in is suitable for rectal/bowel,...
Read More »
AcoustAlert Integrates Perle Ethernet Extenders into Perimeter Detection System
Princeton, N.J. (Dec. 10, 2020) Keeping unauthorized intruders from entering a business location is a critical part of protecting corporate assets. In many cases, fencing or walls are adequate deterrents. Other times, more sophisticated intrusion detection systems, such as security cameras, thermal energy detectors, and sensor cables, are required. In these scenarios, the data recorded by these...
Read More »
New Console Server Supports RS232 and Ethernet Console Management Ports
SCR1618 offered with two SFP slots supporting 1G fiber, 2.5G fiber or 10/100/1000Mbps copper network connections. Availabe with integrated firewall, two-factor authentication, zero touch provisioning and advanced failover to multiple networks. Built-in firewall and 2-factor authentication ensure access to equipment and data are limited to authorized users.
Read More »
New IDS-710HP PoE Gigabit Switch is IEEE802.3bt Compliant
Comes with eight 100W PoE copper ports, with 450W of total available power, and two SFP Slots supporting 1G fiber, 2.5G fiber, or 10/100/1000Mbps copper. Offers built-in PoE injector to supply up to 100W PoE per port and has the ability to reboot attached PDs remotely. Features corrosion resistant IP20 aluminum case, voltage range of 44 to 57 volts DC, and operate in temperatures from -40 to...
Read More »
Installing IT Equipment in Locations where Failure is Not an Option - a CPP Wind Engineering Case Study
Perle Systems and CPP discuss the importance of high-quality equipment installed in hard to access locations, specifically on the top and sides of skyscrapers. Princeton, N.J. (Aug. 18, 2020) When installing IT equipment in remote or hard to access locations, quality and reliability are paramount. When at the bottom of the ocean, on the top of a mountain, or attached to the outside of a...
Read More »
New IRG5000 LTE Routers are ISO 7637-2 and ISO 16750-2 Compliant
Designed to operate on limited power sources by consuming less than 1 Watt in idle mode and 53 mW in standby mode. Operating temperature ranges from -40°F to 158°F ( -40°C to 70°C ) and comes in rugged die-cast aluminum IP54 enclosures. Ideal for Vehicle Area Networks (VANs) applications in public transportation, fleet management, and field personnel.
Read More »
New IRG5000 Industrial LTE Routers with Ruggedized Hardware and Extensive Connectivity Options
Certified for operation on 33 LTE bands with speeds up to 600 Mbps downlink and 150 Mbps uplink. Accelerates deployment of high-performance cellular networking with secure connectivity, location-based services and remote management. Operates on limited power sources by consuming less than 1 Watt in idle mode.
Read More »
New IRG5000 LTE Routers & Gateways Available with Speeds up to 600Mbps Downlink and 150Mbps Uplink
Provide the primary or back-up LTE coverage for business-critical equipment to ensure customers continue to be served. Enable users to leverage reliability and flexibility of cellular networking to minimize downtime, reduce service calls and bring branch office as well as temporary locations online fast. Can be deployed in hierarchical or large mesh network structures to operate as...
Read More »
New DIN Rail PoE Injectors Support Ethernet Runs up to 100m
Provides up to 60W of IEEE802.3bt compliant power over ethernet cabling to connected devices. Enables increased flexibility for the location of installed equipment. Powers both 10/100Base-T network devices and gigabit such as IEEE 802.11ac access points and IP cameras.
Read More »
New DIN Rail Patch Panels Decrease Network Risk and Improve Cable Organisation
Enables organised, flexible and easy connections between field cabling and the control cabinet. Cable shielding is connected quickly and easily without tools, while simultaneously ensuring strain relief. Standard Ethernet patch cables are used between the patch panel and the control cabinet equipment such as PLCs, switches and routers.
Read More »
Ariane Medical Use Perle WiFi Device Servers to Make Their Papillon+ Cancer Treatment System Wireless and Portable
IOLAN WiFi Device Servers provide a safe and secure way to transmit serial RS232 data over WiFi Princeton, N.J. (Jan. 19, 2021) Ariane Medical Systems have been delivering ground-breaking cancer radiation treatment for over 10 years. Mark Davies, Sales Manager at Ariane Medical Systems, explains, “The type of non-surgical radiotherapy that we specialize in is suitable for rectal/bowel,...
Read More »
AcoustAlert Integrates Perle Ethernet Extenders into Perimeter Detection System
Princeton, N.J. (Dec. 10, 2020) Keeping unauthorized intruders from entering a business location is a critical part of protecting corporate assets. In many cases, fencing or walls are adequate deterrents. Other times, more sophisticated intrusion detection systems, such as security cameras, thermal energy detectors, and sensor cables, are required. In these scenarios, the data recorded by these...
Read More »
New Console Server Supports RS232 and Ethernet Console Management Ports
SCR1618 offered with two SFP slots supporting 1G fiber, 2.5G fiber or 10/100/1000Mbps copper network connections. Availabe with integrated firewall, two-factor authentication, zero touch provisioning and advanced failover to multiple networks. Built-in firewall and 2-factor authentication ensure access to equipment and data are limited to authorized users.
Read More »
New IDS-710HP PoE Gigabit Switch is IEEE802.3bt Compliant
Comes with eight 100W PoE copper ports, with 450W of total available power, and two SFP Slots supporting 1G fiber, 2.5G fiber, or 10/100/1000Mbps copper. Offers built-in PoE injector to supply up to 100W PoE per port and has the ability to reboot attached PDs remotely. Features corrosion resistant IP20 aluminum case, voltage range of 44 to 57 volts DC, and operate in temperatures from -40 to...
Read More »
Installing IT Equipment in Locations where Failure is Not an Option - a CPP Wind Engineering Case Study
Perle Systems and CPP discuss the importance of high-quality equipment installed in hard to access locations, specifically on the top and sides of skyscrapers. Princeton, N.J. (Aug. 18, 2020) When installing IT equipment in remote or hard to access locations, quality and reliability are paramount. When at the bottom of the ocean, on the top of a mountain, or attached to the outside of a...
Read More »
New IRG5000 LTE Routers are ISO 7637-2 and ISO 16750-2 Compliant
Designed to operate on limited power sources by consuming less than 1 Watt in idle mode and 53 mW in standby mode. Operating temperature ranges from -40°F to 158°F ( -40°C to 70°C ) and comes in rugged die-cast aluminum IP54 enclosures. Ideal for Vehicle Area Networks (VANs) applications in public transportation, fleet management, and field personnel.
Read More »
New IRG5000 Industrial LTE Routers with Ruggedized Hardware and Extensive Connectivity Options
Certified for operation on 33 LTE bands with speeds up to 600 Mbps downlink and 150 Mbps uplink. Accelerates deployment of high-performance cellular networking with secure connectivity, location-based services and remote management. Operates on limited power sources by consuming less than 1 Watt in idle mode.
Read More »
New IRG5000 LTE Routers & Gateways Available with Speeds up to 600Mbps Downlink and 150Mbps Uplink
Provide the primary or back-up LTE coverage for business-critical equipment to ensure customers continue to be served. Enable users to leverage reliability and flexibility of cellular networking to minimize downtime, reduce service calls and bring branch office as well as temporary locations online fast. Can be deployed in hierarchical or large mesh network structures to operate as...
Read More »
New DIN Rail PoE Injectors Support Ethernet Runs up to 100m
Provides up to 60W of IEEE802.3bt compliant power over ethernet cabling to connected devices. Enables increased flexibility for the location of installed equipment. Powers both 10/100Base-T network devices and gigabit such as IEEE 802.11ac access points and IP cameras.
Read More »
New DIN Rail Patch Panels Decrease Network Risk and Improve Cable Organisation
Enables organised, flexible and easy connections between field cabling and the control cabinet. Cable shielding is connected quickly and easily without tools, while simultaneously ensuring strain relief. Standard Ethernet patch cables are used between the patch panel and the control cabinet equipment such as PLCs, switches and routers.
Read More »