Everett Charles Technologies
Suite 100
Fontana, CA 92336
Substantial Yield Improvements with ECT's LFRE Probes for PCBA Testing
ECT probes with proprietary lead-free plating passed extensive qualification at a major US based OEM Fontana, California, May 2018: Everett Charles Technologies’ (ECT’s) LFRE plated probes successfully passed extensive qualification testing verses an incumbent probe at a major US based OEM for power infrastructure equipment. ECT’s LFRE proprietary plated spring probes demonstrated a...
Read More »
ECT Receptacles are suitable for commercial applications.
ECT Receptacles are suitable for ICT and FT applications. Units come with press fit ring in the outer surface. Products are available in crimp, solder cup, wire wrapping and Fastite® termination versions.
Read More »
ECT's BMP-4 Board Marker Probe features spring-loaded scribe tip.
ECT’s BMP-4 Board Marker Probe is suitable for bare board or loaded board test fixtures. Unit comes in full length threaded housing and is designed to mark materials such as bare glass, solder mask over glass, copper, or bare tinned copper. Product’s tip comes with a 10 mm diameter for quicker replacement. Marker probe is adjustable in z-direction and is equipped with a 12 V DC motor which...
Read More »
Custom Spring Probes Tailored to Demanding Requirements
Everett Charles Technologies leverages decades of expertise to optimize electrical and mechanical performance of custom spring probe solutions Fontana, California, June 2017: Everett Charles Technologies (ECT) has the experience and knowhow to provide custom spring probes for just about every application. ECT’s custom tailored probe solutions are designed taking into account all mechanical,...
Read More »
Spring Contacts suit high-insertion count applications.
Targeting high-reliability applications, Accordion™- is built to serve in harsh military, aerospace, and medical environments. Design – one-piece spring in open architecture format – accommodates diverse physical circuit topologies. While utilizing- single contact eliminates threat of liquid and debris build up between parts and promotes tolerance to vibration/shock, placement...
Read More »Semiconductor Test Probe meets HED device testing challenges.
With 5.0 mm test height that provides- total compression window of 0.8 mm and insertion loss of 18 GHz @ -1 dB (GSG),- ZIP™ semiconductor test probe model Z-080YHJ targets high-lead count BGAs and LGAs and meets challenges associated with testing High End Digital (HED) devices. DUT side plunger, which is- made from HyperCore™ homogenous alloy, features sharp, dual tip geometry for...
Read More »
High Current Probe ensures reliable and repeatable testing.
To address critical parameters of high current testing, 150 A DC-rated HC500F features low resistance plungers, optimized base materials and plating, high-temperature spring design, and high-current tip geometry. Tip styles maximize surface contact and reduce arcing, while body geometries and materials minimize resistance. Areas of use include industrial test applications, including...
Read More »Everett Charles Technologies Expands Line of Battery Probes
CP-2 probe family combines best volume production qualities and cost with wide design flexibility and fast prototyping Pomona, California, -- Everett Charles Technologies (ECT) recently launched the next generation of Battery Interconnect Probes. The versatile CP-2 probe family is highly flexible and designed to match any performance, cost and assembly requirements. CP-2 probes support many...
Read More »
Radial Connectors serve high-current, high-power applications.
SCM series Radial Connectors — SC1 — are offered with single and paired rows, configurable footprints, and ECT CP-059 high current product line. Designed for high-current, high-power needs up to 10 A, products come in SMT and through-hole designs. Degree of resistance accelerates charge times, while internal bias minimizes disconnections. Areas of use include such applications as battery...
Read More »
Radial Connectors meet high current, high power needs.
Rated up to 10 A , SC1 Radial Connectors are offered with single and paired rows and in surface mount and through-hole designs. Low resistance allows fast charge times, while internal bias minimizes disconnections even in high vibration applications. Connectors are suited for battery charging, board-to-board connections, interposers, and medical devices.
Read More »
Substantial Yield Improvements with ECT's LFRE Probes for PCBA Testing
ECT probes with proprietary lead-free plating passed extensive qualification at a major US based OEM Fontana, California, May 2018: Everett Charles Technologies’ (ECT’s) LFRE plated probes successfully passed extensive qualification testing verses an incumbent probe at a major US based OEM for power infrastructure equipment. ECT’s LFRE proprietary plated spring probes demonstrated a...
Read More »
ECT Receptacles are suitable for commercial applications.
ECT Receptacles are suitable for ICT and FT applications. Units come with press fit ring in the outer surface. Products are available in crimp, solder cup, wire wrapping and Fastite® termination versions.
Read More »
ECT's BMP-4 Board Marker Probe features spring-loaded scribe tip.
ECT’s BMP-4 Board Marker Probe is suitable for bare board or loaded board test fixtures. Unit comes in full length threaded housing and is designed to mark materials such as bare glass, solder mask over glass, copper, or bare tinned copper. Product’s tip comes with a 10 mm diameter for quicker replacement. Marker probe is adjustable in z-direction and is equipped with a 12 V DC motor which...
Read More »
Custom Spring Probes Tailored to Demanding Requirements
Everett Charles Technologies leverages decades of expertise to optimize electrical and mechanical performance of custom spring probe solutions Fontana, California, June 2017: Everett Charles Technologies (ECT) has the experience and knowhow to provide custom spring probes for just about every application. ECT’s custom tailored probe solutions are designed taking into account all mechanical,...
Read More »
Spring Contacts suit high-insertion count applications.
Targeting high-reliability applications, Accordion™- is built to serve in harsh military, aerospace, and medical environments. Design – one-piece spring in open architecture format – accommodates diverse physical circuit topologies. While utilizing- single contact eliminates threat of liquid and debris build up between parts and promotes tolerance to vibration/shock, placement...
Read More »Semiconductor Test Probe meets HED device testing challenges.
With 5.0 mm test height that provides- total compression window of 0.8 mm and insertion loss of 18 GHz @ -1 dB (GSG),- ZIP™ semiconductor test probe model Z-080YHJ targets high-lead count BGAs and LGAs and meets challenges associated with testing High End Digital (HED) devices. DUT side plunger, which is- made from HyperCore™ homogenous alloy, features sharp, dual tip geometry for...
Read More »
High Current Probe ensures reliable and repeatable testing.
To address critical parameters of high current testing, 150 A DC-rated HC500F features low resistance plungers, optimized base materials and plating, high-temperature spring design, and high-current tip geometry. Tip styles maximize surface contact and reduce arcing, while body geometries and materials minimize resistance. Areas of use include industrial test applications, including...
Read More »Everett Charles Technologies Expands Line of Battery Probes
CP-2 probe family combines best volume production qualities and cost with wide design flexibility and fast prototyping Pomona, California, -- Everett Charles Technologies (ECT) recently launched the next generation of Battery Interconnect Probes. The versatile CP-2 probe family is highly flexible and designed to match any performance, cost and assembly requirements. CP-2 probes support many...
Read More »
Radial Connectors serve high-current, high-power applications.
SCM series Radial Connectors — SC1 — are offered with single and paired rows, configurable footprints, and ECT CP-059 high current product line. Designed for high-current, high-power needs up to 10 A, products come in SMT and through-hole designs. Degree of resistance accelerates charge times, while internal bias minimizes disconnections. Areas of use include such applications as battery...
Read More »
Radial Connectors meet high current, high power needs.
Rated up to 10 A , SC1 Radial Connectors are offered with single and paired rows and in surface mount and through-hole designs. Low resistance allows fast charge times, while internal bias minimizes disconnections even in high vibration applications. Connectors are suited for battery charging, board-to-board connections, interposers, and medical devices.
Read More »