FIPA, Inc.

FIPA's Latest Customized Application Solution: A Gripper with Thermalon® Vacuum Cups for Rapid Demolding of Injection Molded Parts from an 8-cavity Mold
Material Handling & Storage

FIPA's Latest Customized Application Solution: A Gripper with Thermalon® Vacuum Cups for Rapid Demolding of Injection Molded Parts from an 8-cavity Mold

Tasked with creating a demolding gripper that would yield extremely fast cycle times to achieve a high output, FIPA developed a high-performance, cost-effective solution for German manufacturer Franke Kunststofftechnik GmbH & Co. KG. Cary, N.C. (May 7, 2019) — FIPA Inc., a leading manufacturer of advanced vacuum technology, gripper systems, air nippers, and End-of-Arm-Tooling (EOAT), recently...

Read More »
EOAT Gripper System offers 30-45 seconds cycle time.
Material Handling & Storage

EOAT Gripper System offers 30-45 seconds cycle time.

Featuring vacuum technology, EOAT Gripper System combines vacuum cups and compact ejectors for protective film removal. SM-F Series flat vacuum cups provide high degree of slip resistance and come with vulcanized aluminum connection thread and flexible sealing lip. Cups are designed with silicone-free NBR materials. Incorporating pressure regulator and electronic air saving function, EMA Series...

Read More »
GR03 Series Spring Suspensions provide easy integration into existing EOAT systems.
Architectural & Civil Engineering Products

GR03 Series Spring Suspensions provide easy integration into existing EOAT systems.

Available in non-rotating and threaded spring suspension models, GR03 Series Spring Suspensions are made of lightweight anodized aluminum and offer smooth-running ball guides to achieve high load capacity. Non-rotating suspensions are available in 10, 14, and 20mm diameters with stroke lengths of 10-50mm range and threaded suspensions in M5, G1/8, G1/4 and G3/8 diameters with 10 stroke lengths...

Read More »
EMA Series Compact Ejector operates in temperature ranges of 10 to 60 degrees C.
Controls & Controllers

EMA Series Compact Ejector operates in temperature ranges of 10 to 60 degrees C.

Achieving up to 75% energy savings during product transfer, EMA Series compact ejector operates by supplying Venturi nozzle with compressed air to generate vacuum. Combining electronic vacuum and blow-off control functions in single signal to achieve short cycle times, device offers feed pressure spans of 58 – 116psi. Rated for 24VDC adjusted control voltage ±10%, unit offers IP65...

Read More »
Material Handling & Storage

FIPA Develops Custom Gripper System for Removing Hot Plastic Parts from Injection Molding Machines

Designed to quickly & carefully remove hot plastic parts from an injection molding machine, FIPA’s latest custom gripper system automates a manual demolding process to protect employees, improve quality, reduce cycle times, & increase factory throughput CARY, N.C. — FIPA Inc., a leading manufacturer of advanced vacuum technology, gripper systems, air nippers, tube lifters, and...

Read More »
Bellows Vacuum Cups persevere in short-cycle applications.
Food Processing & Preparation

Bellows Vacuum Cups persevere in short-cycle applications.

Featuring dimensionally stable body and soft, low-marking sealing lip, SP-BX Series Varioflex® bellows vacuum cups facilitate gentle andÂ- reliable lifting, handling, and placement of hot, delicate, curved, and rough plastic parts. Construction is of oil-, ozone-, and wear-resistant polyurethane composite material that withstands temperatures up to 122°F as well...

Read More »
Grippers With Soft Pads suit injection-molded plastics applications.
Machinery & Machining Tools

Grippers With Soft Pads suit injection-molded plastics applications.

Models of 100 Series include GR04.106 single-acting, non-sensing sprue grippers with anodized aluminum alloy housings and soft, quickly replaceable HNBR elastomer pads on inner jaws. Facilitating and accelerating removal and replacement, elastic, clip-mounted jaw pads, temperature resistant from -22 to +320°F, have low-marking, low-abrasion, and wear-resistant design free of silicone and...

Read More »
FIPA Develops Flexible, Cost-Effective Vacuum Gripper Solution for Repacking Application
Material Handling & Storage

FIPA Develops Flexible, Cost-Effective Vacuum Gripper Solution for Repacking Application

Mounted on a Z-axis for vertical lift capabilities, the custom vacuum gripper based on FIPA’s TC Series can handle both individual boxes whole layers, regardless of the package position & size, without changing grippers or wasting vacuum flow CARY, N.C. — FIPA Inc., a leading manufacturer of advanced vacuum technology, gripper systems, air nippers, tube lifters, and End-of-Arm-Tooling (EOAT),...

Read More »
FIPA's Latest Customized Application Solution: A Gripper with Thermalon® Vacuum Cups for Rapid Demolding of Injection Molded Parts from an 8-cavity Mold
Material Handling & Storage

FIPA's Latest Customized Application Solution: A Gripper with Thermalon® Vacuum Cups for Rapid Demolding of Injection Molded Parts from an 8-cavity Mold

Tasked with creating a demolding gripper that would yield extremely fast cycle times to achieve a high output, FIPA developed a high-performance, cost-effective solution for German manufacturer Franke Kunststofftechnik GmbH & Co. KG. Cary, N.C. (May 7, 2019) — FIPA Inc., a leading manufacturer of advanced vacuum technology, gripper systems, air nippers, and End-of-Arm-Tooling (EOAT), recently...

Read More »
EOAT Gripper System offers 30-45 seconds cycle time.
Material Handling & Storage

EOAT Gripper System offers 30-45 seconds cycle time.

Featuring vacuum technology, EOAT Gripper System combines vacuum cups and compact ejectors for protective film removal. SM-F Series flat vacuum cups provide high degree of slip resistance and come with vulcanized aluminum connection thread and flexible sealing lip. Cups are designed with silicone-free NBR materials. Incorporating pressure regulator and electronic air saving function, EMA Series...

Read More »
GR03 Series Spring Suspensions provide easy integration into existing EOAT systems.
Architectural & Civil Engineering Products

GR03 Series Spring Suspensions provide easy integration into existing EOAT systems.

Available in non-rotating and threaded spring suspension models, GR03 Series Spring Suspensions are made of lightweight anodized aluminum and offer smooth-running ball guides to achieve high load capacity. Non-rotating suspensions are available in 10, 14, and 20mm diameters with stroke lengths of 10-50mm range and threaded suspensions in M5, G1/8, G1/4 and G3/8 diameters with 10 stroke lengths...

Read More »
EMA Series Compact Ejector operates in temperature ranges of 10 to 60 degrees C.
Controls & Controllers

EMA Series Compact Ejector operates in temperature ranges of 10 to 60 degrees C.

Achieving up to 75% energy savings during product transfer, EMA Series compact ejector operates by supplying Venturi nozzle with compressed air to generate vacuum. Combining electronic vacuum and blow-off control functions in single signal to achieve short cycle times, device offers feed pressure spans of 58 – 116psi. Rated for 24VDC adjusted control voltage ±10%, unit offers IP65...

Read More »
Material Handling & Storage

FIPA Develops Custom Gripper System for Removing Hot Plastic Parts from Injection Molding Machines

Designed to quickly & carefully remove hot plastic parts from an injection molding machine, FIPA’s latest custom gripper system automates a manual demolding process to protect employees, improve quality, reduce cycle times, & increase factory throughput CARY, N.C. — FIPA Inc., a leading manufacturer of advanced vacuum technology, gripper systems, air nippers, tube lifters, and...

Read More »
Bellows Vacuum Cups persevere in short-cycle applications.
Food Processing & Preparation

Bellows Vacuum Cups persevere in short-cycle applications.

Featuring dimensionally stable body and soft, low-marking sealing lip, SP-BX Series Varioflex® bellows vacuum cups facilitate gentle andÂ- reliable lifting, handling, and placement of hot, delicate, curved, and rough plastic parts. Construction is of oil-, ozone-, and wear-resistant polyurethane composite material that withstands temperatures up to 122°F as well...

Read More »
Grippers With Soft Pads suit injection-molded plastics applications.
Machinery & Machining Tools

Grippers With Soft Pads suit injection-molded plastics applications.

Models of 100 Series include GR04.106 single-acting, non-sensing sprue grippers with anodized aluminum alloy housings and soft, quickly replaceable HNBR elastomer pads on inner jaws. Facilitating and accelerating removal and replacement, elastic, clip-mounted jaw pads, temperature resistant from -22 to +320°F, have low-marking, low-abrasion, and wear-resistant design free of silicone and...

Read More »
FIPA Develops Flexible, Cost-Effective Vacuum Gripper Solution for Repacking Application
Material Handling & Storage

FIPA Develops Flexible, Cost-Effective Vacuum Gripper Solution for Repacking Application

Mounted on a Z-axis for vertical lift capabilities, the custom vacuum gripper based on FIPA’s TC Series can handle both individual boxes whole layers, regardless of the package position & size, without changing grippers or wasting vacuum flow CARY, N.C. — FIPA Inc., a leading manufacturer of advanced vacuum technology, gripper systems, air nippers, tube lifters, and End-of-Arm-Tooling (EOAT),...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers