ST Robotics

Robotics for Education - ST Robotics Readies Engineering Students for Robotics Careers
Robotics

Robotics for Education - ST Robotics Readies Engineering Students for Robotics Careers

PRINCETON, NJ December 3, 2019 ST Robotics software and hardware solutions are providing students with hands-on robotics training. Most recently, Rose-Hulman Institute of Technology purchased four more ST R12 industrial robots, for a total of 12 ST Robotics’ five and six-axis industry-standard robots now being used in their college classrooms. “Students love using the ST robot”, commented...

Read More »
ST Robotics Releases ROS Software Interface
Software

ST Robotics Releases ROS Software Interface

PRINCETON, N.J., Aug. 20, 2018 /PRNewswire/ -- ST Robotics announces that it is has built an interface between its RoboForth natural language system and ROS (Robot Operating System), adding even more flexibility to ST's proven industrial robots. Making the ST Robots compatible with ROS has resulted in a very fast interface with the ST robot responding faster than any other robot that is...

Read More »
Doctor Who Theme Tune Inspires the Creation of ST Robotics Cocktail Robot
Robotics

Doctor Who Theme Tune Inspires the Creation of ST Robotics Cocktail Robot

PRINCETON, NJ January 31, 2018 - In an unprecedented effort to show its clients their technical innovation and ingenuity, Factorylux, a UK manufacturer of architectural and design lighting, used the ST Robotics R12 industrial robot to mix cocktails at the London Design Festival using nothing but audio frequencies. The result of this new sound and light installation was 'Cocktails &...

Read More »
ST R17HS Robotic Arm uses state-of-the-art brushless servomotors.
Robotics

ST R17HS Robotic Arm uses state-of-the-art brushless servomotors.

Presenting high speed version of five-axis vertically articulated R17 robot arm, ST R17HS boasts an effective reach of 750mm, repeatability of 0.2 mm and maximum speed after acceleration of 480 deg/sec in the robot's waist, elbow, hand and wrist, with shoulder speed of 300 deg/sec. Including pneumatic, electric and vacuum grippers, and expandable I/O options, unit features new K11R...

Read More »
ST Robotics Announces Strategic Distribution Partners in North America
Mounting & Attaching Products

ST Robotics Announces Strategic Distribution Partners in North America

PRINCETON, N.J., May 25, 2016 - ST Robotics is pleased to announce new distribution agreements with RobotShop and SuperDroid Robots to deliver its low-cost, easy-to-use ST R Series articulated and cylindrical robot arm systems across North America. We are excited about our new collaboration with RobotShop and SuperDroid Robots which will allow us to provide the ST robot systems to a wider range...

Read More »
Vision Inspection System provides precision fault detection.
Robotics

Vision Inspection System provides precision fault detection.

Integrated with full range of ST Robotics arms, STVS-X is used for automated and accurate handling, testing, and inspection of critical parts. ST robot arm, developed to address tight fault detection and QA inÂ- high-precision components manufacturing, picks up the part to be inspected and rotates it in front of Epix SV5M10 Hi-Res camera. Measurements can be made down to a 0.001 mm...

Read More »
Passive Tool Changer does not require compressed air, electrics.
Electronic Components & Devices

Passive Tool Changer does not require compressed air, electrics.

Available for R12Â- five- and six-axis articulated robot arms, TC12 is locked entirely by last axis of robot. This passive tool changer does not require any compressed air or electrics to operate and can pass through 3 pneumatic lines (air/vacuum) and up to 5 electrical connections. Pneumatics are enough for double acting gripper and vacuum pickup, and...

Read More »
Vision System measures to 0.1 mm.
Test & Measurement

Vision System measures to 0.1 mm.

Compatible with full range of ST-Robotics’ arms and controller, Vision System can measure to 0.1 mm and send precise coordinates of object to robot. System comprises Matrox GigE 1,920 x 1,448 pixel camera; C-mount lens with zoom, focus, and exposure control; and LED lighting. Hardware and RobWin software are installed on user'sÂ- PC, and second serial channel connects to robot...

Read More »
Two-Armed Robot System features 11-axis design.
Mounting & Attaching Products

Two-Armed Robot System features 11-axis design.

Tandem R125 features two 5-axis vertically articulated robot arms mounted to programmable carousel. Also included are 2 interconnected K11R robot controllers enabling communications to synchronize motions of both robots or allowing robots to alternate turns while performing one task. RoboForth II software, teach pad, equipment interfacing, and cables are included in industrial system.

Read More »
Robotics for Education - ST Robotics Readies Engineering Students for Robotics Careers
Robotics

Robotics for Education - ST Robotics Readies Engineering Students for Robotics Careers

PRINCETON, NJ December 3, 2019 ST Robotics software and hardware solutions are providing students with hands-on robotics training. Most recently, Rose-Hulman Institute of Technology purchased four more ST R12 industrial robots, for a total of 12 ST Robotics’ five and six-axis industry-standard robots now being used in their college classrooms. “Students love using the ST robot”, commented...

Read More »
ST Robotics Releases ROS Software Interface
Software

ST Robotics Releases ROS Software Interface

PRINCETON, N.J., Aug. 20, 2018 /PRNewswire/ -- ST Robotics announces that it is has built an interface between its RoboForth natural language system and ROS (Robot Operating System), adding even more flexibility to ST's proven industrial robots. Making the ST Robots compatible with ROS has resulted in a very fast interface with the ST robot responding faster than any other robot that is...

Read More »
Doctor Who Theme Tune Inspires the Creation of ST Robotics Cocktail Robot
Robotics

Doctor Who Theme Tune Inspires the Creation of ST Robotics Cocktail Robot

PRINCETON, NJ January 31, 2018 - In an unprecedented effort to show its clients their technical innovation and ingenuity, Factorylux, a UK manufacturer of architectural and design lighting, used the ST Robotics R12 industrial robot to mix cocktails at the London Design Festival using nothing but audio frequencies. The result of this new sound and light installation was 'Cocktails &...

Read More »
ST R17HS Robotic Arm uses state-of-the-art brushless servomotors.
Robotics

ST R17HS Robotic Arm uses state-of-the-art brushless servomotors.

Presenting high speed version of five-axis vertically articulated R17 robot arm, ST R17HS boasts an effective reach of 750mm, repeatability of 0.2 mm and maximum speed after acceleration of 480 deg/sec in the robot's waist, elbow, hand and wrist, with shoulder speed of 300 deg/sec. Including pneumatic, electric and vacuum grippers, and expandable I/O options, unit features new K11R...

Read More »
ST Robotics Announces Strategic Distribution Partners in North America
Mounting & Attaching Products

ST Robotics Announces Strategic Distribution Partners in North America

PRINCETON, N.J., May 25, 2016 - ST Robotics is pleased to announce new distribution agreements with RobotShop and SuperDroid Robots to deliver its low-cost, easy-to-use ST R Series articulated and cylindrical robot arm systems across North America. We are excited about our new collaboration with RobotShop and SuperDroid Robots which will allow us to provide the ST robot systems to a wider range...

Read More »
Vision Inspection System provides precision fault detection.
Robotics

Vision Inspection System provides precision fault detection.

Integrated with full range of ST Robotics arms, STVS-X is used for automated and accurate handling, testing, and inspection of critical parts. ST robot arm, developed to address tight fault detection and QA inÂ- high-precision components manufacturing, picks up the part to be inspected and rotates it in front of Epix SV5M10 Hi-Res camera. Measurements can be made down to a 0.001 mm...

Read More »
Passive Tool Changer does not require compressed air, electrics.
Electronic Components & Devices

Passive Tool Changer does not require compressed air, electrics.

Available for R12Â- five- and six-axis articulated robot arms, TC12 is locked entirely by last axis of robot. This passive tool changer does not require any compressed air or electrics to operate and can pass through 3 pneumatic lines (air/vacuum) and up to 5 electrical connections. Pneumatics are enough for double acting gripper and vacuum pickup, and...

Read More »
Vision System measures to 0.1 mm.
Test & Measurement

Vision System measures to 0.1 mm.

Compatible with full range of ST-Robotics’ arms and controller, Vision System can measure to 0.1 mm and send precise coordinates of object to robot. System comprises Matrox GigE 1,920 x 1,448 pixel camera; C-mount lens with zoom, focus, and exposure control; and LED lighting. Hardware and RobWin software are installed on user'sÂ- PC, and second serial channel connects to robot...

Read More »
Two-Armed Robot System features 11-axis design.
Mounting & Attaching Products

Two-Armed Robot System features 11-axis design.

Tandem R125 features two 5-axis vertically articulated robot arms mounted to programmable carousel. Also included are 2 interconnected K11R robot controllers enabling communications to synchronize motions of both robots or allowing robots to alternate turns while performing one task. RoboForth II software, teach pad, equipment interfacing, and cables are included in industrial system.

Read More »

All Topics