Elite Thermal Engineering
Bothell, WA 98021
Thermoelectric Cold Plate meets needs of 19 in. rack applications.
Designed for OEM or laboratory applications, 19 in.- rack version of 300 W thermoelectric cooling plate (OCP-300L) measures 15 x 7.25 x 3.72 in. and uses microforged heatsinks and duct air from one end of heatsink thru fins to other end instead of impinging air into center of heatsink. Cooling capacity is 300- W and can be increased by adding more heatsinks. Available for OCP-300L,- heatsink...
Read More »
Thermoelectric Controller delivers main and auxiliary power.
Offering up to 600 W of power output to drive thermoelectric (TEC) cold plates and up to 40 W auxiliary power for fans or pumps, configurable model MC-1000 can also be used as heater controller. Setup only requires user to wire TEC, fan, and temperature sensor to terminal block on back of unit; plug in provided power cord; and flip switch. Front panel features one knob for adjusting set...
Read More »
Fan/Heatsink Assembly features six embedded heatpipes.
With ability to deliver 0.04-ºC/w in 320 x 160 mm footprint, model HS-004 suits applications in high power IGBTs, power converter modules, and high power laser sources. It is available with 5 high power fans, fan duct, and terminal block, facilitating power supply connection. Other features include segmented high density fins to break down laminar flow layers periodically along flow path to...
Read More »
Cold Plate is designed for high power fiber coupled lasers.
Model OCP-150 is compact high power 150 W OEM thermoelectric, nickel-plated cold plate to maximize heat spreading for high heat flux laser diodes. It has mounting patterns for nLight's Pearl fiber coupled lasers, LIMO's fiber coupled lasers, and QPC's Brightlase Ultra. Heatsinks for OCP-150 have 3 heatpipes, and all heatpipes and heatsinks are nickel plated and soldered together to maximize heat...
Read More »Fan/Heatsink Assembly comes with 3 embedded heatpipes.
Combining forging and heatpipe technology, Model HS-008 fan/heatsink combo delivers 0.08-ºC/W in compact 160 x 160 mm footprint. It has segmented high density fins that break down laminar flow layers periodically along flow path to increase turbulence. Suited for high power IGBTs, power converter modules, and high power laser sources, unit is available with 2 high power 60 mm fans, one fan duct,...
Read More »
OEM Thermoelectric Cold Plate has dual butterfly mounts.
Featuring 2 model BA-01 butterfly mounts, OCP-050A stabilizes uncooled butterfly lasers using external TECs. It features aluminum cold plate and proprietary thermoelectric modules, which maintain enough cooling capacity for 2 of any high-power pump lasers. Butterfly lasers with internal thermoelectric coolers have lower power due to cooling capacity limit of internal TECs. Uncooled butterfly...
Read More »Thermoelectric Coolers come in single and dual stage models.
Functioning in continuous operating temperatures up to 100-ºC, single-stage thermoelectric coolers (TECs) are built to withstand temperature cycles in extreme environmental conditions and feature polyurethane seal with hydrolytic stability. Dual-stage TEC module, ETD-8-198, is designed for demanding applications where high delta T as well as high cooling capacity are required. Products suit...
Read More »
Thermoelectric Cold Plate suits high-power fiber lasers.
Intended for fiber laser OEM or laboratory cooling applications, Model OCP-110 provides 110 W cooling capacity when set temperature is same as ambient. Set temperature can be 48-
Read More »
Butterfly Laser Mounting Module has dual-station design.
Integrated cooling module, DBH-022, facilitates installation/removal of 14-pin butterfly laser packages for quick power on inspection, repair, burn-in, or integration into end products. Solution combines OEM fan mounted heatsink HS-022 with two 14-pin butterfly mounting boards model BA-01. Thermal resistance of 0.22-°C/W translates to less than 15-°C temperature rise over ambient when loaded...
Read More »Laser Diode Mounting Kits suit CS mount lasers.
Turnkey Laser Diode Mounting Kits include 1 aluminum nitride plate and 4 nylon shoulder washers for mounting CS mount or equivalent diodes on cold plates. Plate measures 25 x 25 mm and .635 mm thick with 4 through holes that match diode mounting patterns. It offers thermal conductivity while providing electrical isolation between diode and cold plate. Nylon washers isolate metal screws from diode...
Read More »
Thermoelectric Cold Plate meets needs of 19 in. rack applications.
Designed for OEM or laboratory applications, 19 in.- rack version of 300 W thermoelectric cooling plate (OCP-300L) measures 15 x 7.25 x 3.72 in. and uses microforged heatsinks and duct air from one end of heatsink thru fins to other end instead of impinging air into center of heatsink. Cooling capacity is 300- W and can be increased by adding more heatsinks. Available for OCP-300L,- heatsink...
Read More »
Thermoelectric Controller delivers main and auxiliary power.
Offering up to 600 W of power output to drive thermoelectric (TEC) cold plates and up to 40 W auxiliary power for fans or pumps, configurable model MC-1000 can also be used as heater controller. Setup only requires user to wire TEC, fan, and temperature sensor to terminal block on back of unit; plug in provided power cord; and flip switch. Front panel features one knob for adjusting set...
Read More »
Fan/Heatsink Assembly features six embedded heatpipes.
With ability to deliver 0.04-ºC/w in 320 x 160 mm footprint, model HS-004 suits applications in high power IGBTs, power converter modules, and high power laser sources. It is available with 5 high power fans, fan duct, and terminal block, facilitating power supply connection. Other features include segmented high density fins to break down laminar flow layers periodically along flow path to...
Read More »
Cold Plate is designed for high power fiber coupled lasers.
Model OCP-150 is compact high power 150 W OEM thermoelectric, nickel-plated cold plate to maximize heat spreading for high heat flux laser diodes. It has mounting patterns for nLight's Pearl fiber coupled lasers, LIMO's fiber coupled lasers, and QPC's Brightlase Ultra. Heatsinks for OCP-150 have 3 heatpipes, and all heatpipes and heatsinks are nickel plated and soldered together to maximize heat...
Read More »Fan/Heatsink Assembly comes with 3 embedded heatpipes.
Combining forging and heatpipe technology, Model HS-008 fan/heatsink combo delivers 0.08-ºC/W in compact 160 x 160 mm footprint. It has segmented high density fins that break down laminar flow layers periodically along flow path to increase turbulence. Suited for high power IGBTs, power converter modules, and high power laser sources, unit is available with 2 high power 60 mm fans, one fan duct,...
Read More »
OEM Thermoelectric Cold Plate has dual butterfly mounts.
Featuring 2 model BA-01 butterfly mounts, OCP-050A stabilizes uncooled butterfly lasers using external TECs. It features aluminum cold plate and proprietary thermoelectric modules, which maintain enough cooling capacity for 2 of any high-power pump lasers. Butterfly lasers with internal thermoelectric coolers have lower power due to cooling capacity limit of internal TECs. Uncooled butterfly...
Read More »Thermoelectric Coolers come in single and dual stage models.
Functioning in continuous operating temperatures up to 100-ºC, single-stage thermoelectric coolers (TECs) are built to withstand temperature cycles in extreme environmental conditions and feature polyurethane seal with hydrolytic stability. Dual-stage TEC module, ETD-8-198, is designed for demanding applications where high delta T as well as high cooling capacity are required. Products suit...
Read More »
Thermoelectric Cold Plate suits high-power fiber lasers.
Intended for fiber laser OEM or laboratory cooling applications, Model OCP-110 provides 110 W cooling capacity when set temperature is same as ambient. Set temperature can be 48-
Read More »
Butterfly Laser Mounting Module has dual-station design.
Integrated cooling module, DBH-022, facilitates installation/removal of 14-pin butterfly laser packages for quick power on inspection, repair, burn-in, or integration into end products. Solution combines OEM fan mounted heatsink HS-022 with two 14-pin butterfly mounting boards model BA-01. Thermal resistance of 0.22-°C/W translates to less than 15-°C temperature rise over ambient when loaded...
Read More »Laser Diode Mounting Kits suit CS mount lasers.
Turnkey Laser Diode Mounting Kits include 1 aluminum nitride plate and 4 nylon shoulder washers for mounting CS mount or equivalent diodes on cold plates. Plate measures 25 x 25 mm and .635 mm thick with 4 through holes that match diode mounting patterns. It offers thermal conductivity while providing electrical isolation between diode and cold plate. Nylon washers isolate metal screws from diode...
Read More »