Select-Arc, Inc.
Ft Loramie, OH 45845
Martensitic Alloy Electrode suits hardsurfacing applications.
Offered in gas-shielded or open-arc versions, SelectWear 58 combines high hardness with abrasion and impact resistance. Metal-to-earth wear welding wire can be put down in multiple layers without cracking. Available in diameters from .035–1/8 in., SelectWear 58 is used in such critical hardsurfacing applications as debarking knives, agricultural tillage tools, chisel plows, dredge components,...
Read More »
Hard Surfacing Electrode suits high temperature applications.
Available in 6 diameters from .045–1/8 in., SelectWear 60HC can be utilized in hot wear applications up to 1,100°F. Metal-to-earth wear welding wire is designed to deposit alloy composed of high-density of primary chromium carbides in iron matrix. Offering deposit with high abrasion and moderate impact resistances that relieves itself by cross cracking, electrode is suited...
Read More »
Submerged Arc Electrode is resistant to corrosion.
Available in 3/32, 7/64, and 1/8 in.dia, SelectWear 410NiMo-S hardsurfacing martensitic stainless steel wire producesÂ- tough, abrasion-resistant deposit that exhibits resistance to corrosion and thermal fatigue. This tubular submerged arc welding electrode is suited for use in such hardsurfacing applications as pinch rolls, caster rolls, and idler rolls.
Read More »
T-8 Electrode offers low temperature toughness.
Available in 1/16, .072, and 5/64 in. diameters, Select 78-Ni1 exhibits smooth globular transfer and optimized bead shape. Carbon steel, flux cored, self-shielded electrode operates on straight polarity (DCEN) with no external shielding gas. Providing fast freezing slag that facilitates welding in all positions, Select 78-Ni1 is utilized in critical structural applications such as offshore...
Read More »
Hardsurfacing Electrode maintains sharp edges.
Intended for welding components required to maintainÂ- sharp edge, SelectWear M7 offers high hardness (2 layers – RC60-65) with balanced abrasion and impact resistance. Deposit is magnetic, will not cross check, and is not readily machinable. Available in .035, .045, 1/16, 7/64, and 1/8 in. dia, this iron-based, martensitic, high-molybdenum, high-speed, tool steel alloy electrode...
Read More »
Arc-Stable Stainless Steel Electrode reduces burn-through.
Due to its stable arc characteristics, Select 430LCb-Mod promotes accelerated travel speeds withÂ- reduced burn-through and spatter. Chrome content, combined with stabilization from niobium and titanium, provides heat and corrosion resistance similar to base materials which are welded. Available in .045, .052, and 1/16 in. dia, this metal cored, ferritic electrode also handles poor fit-up...
Read More »
Stainless Steel Electrode welds thin exhaust components.
Designed for automotive applications that useÂ- thin materials, Select FP 439Ti can weld aluminized or other coated components on ~0.8 mm material with no burn through. Metal cored ferritic stainless steel electrode provides stable spray arc over broad range of current and voltage settings with emphasis on low heat input. Available in .035, .045, and 1/16 in. diameters, Select FP 439Ti is...
Read More »
Composite Metal Cored Electrode welds aluminized material.
Intended for welding of ferritic stainless steel, particularly on thin section, aluminized material, Select FP 409Ti comes in .045 in. dia and provides stable spray arc over diverse current/voltage settings with minimal spatter and no burn-through on thin material. Titanium acts as stabilizing agent to provide oxidation and corrosion resistance. Furthermore, resistance to sensitization reduces...
Read More »
Flux Cored Electrode welds plates with surface contaminants.
Available in 3/32 in.Â- dia, Select 70CRP is suited for welding automatic or semi-automatic fillet welds on ship panels, barges, or any structural plate that has been coated with rust-preventive primer or non-coated plate that has rusted. Formulation of this flux cored, carbon steel electrode enables welding on primer and rust with minimal porosity/blowholes. Additionally,...
Read More »
Shielded Electrode is suited for low-temperature stress relief.
OfferedÂ- in .045, 052, and 1/16 in. dia, Select 70C-6 SR consists of E70C-6MJ-H4 gas-shielded, metal cored electrode with properties that promote weldability and minimal slag. This results in smooth arc transfer with maximized arc stability. Also, wire exhibits optimized mechanical properties at temperatures down to -60°F in both as-welded and stress relief condition. Suitable welding...
Read More »
Martensitic Alloy Electrode suits hardsurfacing applications.
Offered in gas-shielded or open-arc versions, SelectWear 58 combines high hardness with abrasion and impact resistance. Metal-to-earth wear welding wire can be put down in multiple layers without cracking. Available in diameters from .035–1/8 in., SelectWear 58 is used in such critical hardsurfacing applications as debarking knives, agricultural tillage tools, chisel plows, dredge components,...
Read More »
Hard Surfacing Electrode suits high temperature applications.
Available in 6 diameters from .045–1/8 in., SelectWear 60HC can be utilized in hot wear applications up to 1,100°F. Metal-to-earth wear welding wire is designed to deposit alloy composed of high-density of primary chromium carbides in iron matrix. Offering deposit with high abrasion and moderate impact resistances that relieves itself by cross cracking, electrode is suited...
Read More »
Submerged Arc Electrode is resistant to corrosion.
Available in 3/32, 7/64, and 1/8 in.dia, SelectWear 410NiMo-S hardsurfacing martensitic stainless steel wire producesÂ- tough, abrasion-resistant deposit that exhibits resistance to corrosion and thermal fatigue. This tubular submerged arc welding electrode is suited for use in such hardsurfacing applications as pinch rolls, caster rolls, and idler rolls.
Read More »
T-8 Electrode offers low temperature toughness.
Available in 1/16, .072, and 5/64 in. diameters, Select 78-Ni1 exhibits smooth globular transfer and optimized bead shape. Carbon steel, flux cored, self-shielded electrode operates on straight polarity (DCEN) with no external shielding gas. Providing fast freezing slag that facilitates welding in all positions, Select 78-Ni1 is utilized in critical structural applications such as offshore...
Read More »
Hardsurfacing Electrode maintains sharp edges.
Intended for welding components required to maintainÂ- sharp edge, SelectWear M7 offers high hardness (2 layers – RC60-65) with balanced abrasion and impact resistance. Deposit is magnetic, will not cross check, and is not readily machinable. Available in .035, .045, 1/16, 7/64, and 1/8 in. dia, this iron-based, martensitic, high-molybdenum, high-speed, tool steel alloy electrode...
Read More »
Arc-Stable Stainless Steel Electrode reduces burn-through.
Due to its stable arc characteristics, Select 430LCb-Mod promotes accelerated travel speeds withÂ- reduced burn-through and spatter. Chrome content, combined with stabilization from niobium and titanium, provides heat and corrosion resistance similar to base materials which are welded. Available in .045, .052, and 1/16 in. dia, this metal cored, ferritic electrode also handles poor fit-up...
Read More »
Stainless Steel Electrode welds thin exhaust components.
Designed for automotive applications that useÂ- thin materials, Select FP 439Ti can weld aluminized or other coated components on ~0.8 mm material with no burn through. Metal cored ferritic stainless steel electrode provides stable spray arc over broad range of current and voltage settings with emphasis on low heat input. Available in .035, .045, and 1/16 in. diameters, Select FP 439Ti is...
Read More »
Composite Metal Cored Electrode welds aluminized material.
Intended for welding of ferritic stainless steel, particularly on thin section, aluminized material, Select FP 409Ti comes in .045 in. dia and provides stable spray arc over diverse current/voltage settings with minimal spatter and no burn-through on thin material. Titanium acts as stabilizing agent to provide oxidation and corrosion resistance. Furthermore, resistance to sensitization reduces...
Read More »
Flux Cored Electrode welds plates with surface contaminants.
Available in 3/32 in.Â- dia, Select 70CRP is suited for welding automatic or semi-automatic fillet welds on ship panels, barges, or any structural plate that has been coated with rust-preventive primer or non-coated plate that has rusted. Formulation of this flux cored, carbon steel electrode enables welding on primer and rust with minimal porosity/blowholes. Additionally,...
Read More »
Shielded Electrode is suited for low-temperature stress relief.
OfferedÂ- in .045, 052, and 1/16 in. dia, Select 70C-6 SR consists of E70C-6MJ-H4 gas-shielded, metal cored electrode with properties that promote weldability and minimal slag. This results in smooth arc transfer with maximized arc stability. Also, wire exhibits optimized mechanical properties at temperatures down to -60°F in both as-welded and stress relief condition. Suitable welding...
Read More »
