Gardner Denver, Inc.

380 Series Vacuum Pumps meet RoHS and REACH standards.
Fluid & Gas Flow Equipment

380 Series Vacuum Pumps meet RoHS and REACH standards.

Available in 380CE32 and 380CS32 models, 380 Series Vacuum Pumps are designed with integral 9 blade cooling air flow fan, foot mount design and quality die-cast aluminum components. Providing 1.2 cfm and 1.0/1.2 cfm open flow, 380CE32 and 380CS32 series pumps measure 6.94 L x 5.14 W x 6.73 in.H, and 8.40 L x 5.14 W x 6.73 in.H, respectively. Pumps are used in medical, food and beverage...

Read More »
LW-300 and LW-400 Linear Blowers meets IP54 protection class approval.
Fluid & Gas Flow Equipment

LW-300 and LW-400 Linear Blowers meets IP54 protection class approval.

Measuring 365 mm x 216 mm x 220 mm, LW-300 and LW-400 Linear Blowers are 230V 50Hz oil-less dual drive linear unit high output blowers. Providing high output open flows up to 625 l/min, unit enables flows at rated pressure of 350 l/min at 200 mbar and 425 l/min at 200 mbar respectively. Including drive unit direct cooling, diaphragm protection switches, thermal protectors, and internal fuses,...

Read More »
Air Compressors feature twin-cylinder design.
Fluid & Gas Flow Equipment

Air Compressors feature twin-cylinder design.

Featuring fan-cooled design with one-piece monolithic head, 2380 Series Twin WOB-L® Piston Oil-less Air Compressors provide 100 psi max pressure with open flow of 2.3 cfm. Variable output units have permanently lubricated bearings, stainless steel valves, and thin wall, hard coated aluminum cylinder. Measuring 9.31 x 5.14 x 6.73 in., compressors are designed for pressure/vacuum in medical,...

Read More »
Lightweight Variable Output Pump has twin-cylinder design.
Fluid & Gas Flow Equipment

Lightweight Variable Output Pump has twin-cylinder design.

Designed for medical, instrumentation, and lab automation applications requiring variable output and low power consumption, 2110 series twin WOB-L® piston oil-less air compressor provides variable output through its brushless DC motor and motor controller design. Size of 3.53 x 2.21 x 3.00 in. allows use in various applications, and twin-cylinder design provides reliability with low...

Read More »
DC Pump and Compressor includes EMI suppression.
Fluid & Gas Flow Equipment

DC Pump and Compressor includes EMI suppression.

Manufactured with die-cast aluminum components, 319 Series Oil-less, WOB-L® Piston DC Pump and Compressor feature corrosion-resistant e-coated exterior finish, stainless steel inlet valve, thermally protected motor, and inlet filter/exhaust muffler. RoHS-compliant units provide up to 150 psiÂ- max intermittent pressure and 93% local barometer of max vacuum. Also available with...

Read More »
Rotary Screw Compressors operate from 70-175 psig.
Fluid & Gas Flow Equipment

Rotary Screw Compressors operate from 70-175 psig.

With ability to be configured as air-cooled/water-cooled, VS 80-110 and VS 135-170 Variable Speed series compressors combine Enduro airend with AirSmart control system. They maintain target pressure to ±1 psig and feature Smart Mixing Valve technology that adjusts lubricant injection temperature based on ambient temperature. Models VS 80 and VS 110 provide from 85-558 and 112-719 acfm,...

Read More »
Fluid & Gas Flow Equipment

Variable Speed DC Vacuum Pumps offer 45 lpm flow rate.

Offering 2-stage diaphragm mechanism with ultimate vacuum to 1.5 Torr, Welch® VARIFLOW(TM) Vacuum Pumps can be used for full chemical- and standard-duty operation in OEM and laboratory applications. Chemical Duty Model 8115D-20 uses PTFE heads/diaphragms and FKM valves, while Standard Duty Model 8115D-25 uses aluminum heads and EPDM diaphragms/valves. All models use 24 V brushless dc motors...

Read More »
Fluid & Gas Flow Equipment

Variable Speed Air Compressors feature direct drive.

Able to be configured as air-cooled or water-cooled, Models VST 110, VST 150, and VST 180 are rated at 150, 200, and 250 hp, respectively. Two-stage rotary screw compressors include variable-speed cooling fans, AirSmart controller, and operating sound levels that allow units to be placed anywhere. Units have no gears and can supply any pressure from 85-175 psig.

Read More »
Fluid & Gas Flow Equipment

Variable Speed Air Compressor provides 11-58 acfm.

Combining Tempest integrated air end/sump and AirSmart control system, Model VS 11 operates from 70-175 psig and provides unlimited start and stop capability. Design allows for operation from 100% down to 20%, with precise pressure control to ±1 psig. Available with base or tank mounting and optional integrated refrigerated dryer, rotary screw compressor provides noise level of 64 dBA.

Read More »
Fluid & Gas Flow Equipment

Variable Speed Air Compressors operate from 100-20% capacity,.

Configured as air- or water-cooled, VS 135 and 170 rotary screw compressors combine Enduro + airend and AirSmart control system. Smart Mixing Valve Technology keeps air/oil mixture above pressure dew point and prevent water from condensing in compressor. While VS 135 provides 125-862 acfm, VS 170 provides 139-1,056 acfm. Both operate from 70-175 psig, exhibit respective noise levels of 76 and 77...

Read More »
380 Series Vacuum Pumps meet RoHS and REACH standards.
Fluid & Gas Flow Equipment

380 Series Vacuum Pumps meet RoHS and REACH standards.

Available in 380CE32 and 380CS32 models, 380 Series Vacuum Pumps are designed with integral 9 blade cooling air flow fan, foot mount design and quality die-cast aluminum components. Providing 1.2 cfm and 1.0/1.2 cfm open flow, 380CE32 and 380CS32 series pumps measure 6.94 L x 5.14 W x 6.73 in.H, and 8.40 L x 5.14 W x 6.73 in.H, respectively. Pumps are used in medical, food and beverage...

Read More »
LW-300 and LW-400 Linear Blowers meets IP54 protection class approval.
Fluid & Gas Flow Equipment

LW-300 and LW-400 Linear Blowers meets IP54 protection class approval.

Measuring 365 mm x 216 mm x 220 mm, LW-300 and LW-400 Linear Blowers are 230V 50Hz oil-less dual drive linear unit high output blowers. Providing high output open flows up to 625 l/min, unit enables flows at rated pressure of 350 l/min at 200 mbar and 425 l/min at 200 mbar respectively. Including drive unit direct cooling, diaphragm protection switches, thermal protectors, and internal fuses,...

Read More »
Air Compressors feature twin-cylinder design.
Fluid & Gas Flow Equipment

Air Compressors feature twin-cylinder design.

Featuring fan-cooled design with one-piece monolithic head, 2380 Series Twin WOB-L® Piston Oil-less Air Compressors provide 100 psi max pressure with open flow of 2.3 cfm. Variable output units have permanently lubricated bearings, stainless steel valves, and thin wall, hard coated aluminum cylinder. Measuring 9.31 x 5.14 x 6.73 in., compressors are designed for pressure/vacuum in medical,...

Read More »
Lightweight Variable Output Pump has twin-cylinder design.
Fluid & Gas Flow Equipment

Lightweight Variable Output Pump has twin-cylinder design.

Designed for medical, instrumentation, and lab automation applications requiring variable output and low power consumption, 2110 series twin WOB-L® piston oil-less air compressor provides variable output through its brushless DC motor and motor controller design. Size of 3.53 x 2.21 x 3.00 in. allows use in various applications, and twin-cylinder design provides reliability with low...

Read More »
Mergers & Acquisitions

Gardner Denver Medical Acquires TriContinent Scientific

• Strategic fit due to complementing product portfolios • Complete solutions from one single source MUNICH, Germany –Â- Gardner Denver's Medical Group ( Gardner Denver"), a leader in flow control solutions primarily for medical and laboratory sectors, today announced the closing of its acquisition of TriContinent Scientific, Inc. ("TriContinent Scientific"). Headquartered in Grass...

Read More »
DC Pump and Compressor includes EMI suppression.
Fluid & Gas Flow Equipment

DC Pump and Compressor includes EMI suppression.

Manufactured with die-cast aluminum components, 319 Series Oil-less, WOB-L® Piston DC Pump and Compressor feature corrosion-resistant e-coated exterior finish, stainless steel inlet valve, thermally protected motor, and inlet filter/exhaust muffler. RoHS-compliant units provide up to 150 psiÂ- max intermittent pressure and 93% local barometer of max vacuum. Also available with...

Read More »
Company News

Gardner Denver, Inc. Delivers Record First Quarter 2011 Financial Results

Company Reports Record-Level Quarterly Revenues, Orders, Backlog and Operating Income and Highest First Quarter Net Income and DEPS in Company History Company Highlights (Attributable to Gardner Denver): o Diluted Earnings per Share ( DEPS") were $1.13 for the first quarter of 2011, inclusive of profit improvement costs and other items totaling $0.02, an increase of 85% compared to $0.61 in the...

Read More »
People in the News

Gardner Denver, Inc. Appoints President, Industrial Products Group

WAYNE, PA, April 13, 2011 - Gardner Denver, Inc. (NYSE: GDI) today announced the appointment of Christopher R. Celtruda as Vice President, Gardner Denver, Inc. and President, Industrial Products Group effective April 26, 2011. Mr. Celtruda will be based in Gardner Denver's global headquarters in Wayne, PA. Prior to joining Gardner Denver, Mr. Celtruda was employed by CIRCOR International, Inc. as...

Read More »
People in the News

Gardner Denver, Inc. Announces the Retirement of Frank J. Hansen from the Board of Directors Effective November 2011; Diane K. Schumacher to Succeed as Chairperson

WAYNE, PA February 24, 2011 - Gardner Denver, Inc. (NYSE: GDI) announced today that Frank J. Hansen, Chairman of the Board of Directors, has decided to retire following the November 2011 Board Meeting after having reached the customary Board retirement age. The Board has unanimously appointed Diane K. Schumacher, member of the Gardner Denver, Inc. Board of Directors since 2000, to succeed Mr....

Read More »
Company News

Gardner Denver, Inc. Declares Quarterly Cash Dividend

WAYNE, PA February 22, 2011 - Gardner Denver, Inc. (NYSE: GDI) announced today that its Board of Directors declared a quarterly dividend of $0.05 per share, payable on March 24, 2011, to stockholders of record as of March 8, 2011. Gardner Denver, Inc., with 2010 revenues of approximately $1.9 billion, is a leading worldwide manufacturer of highly engineered products, including compressors, liquid...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers