ICP DAS USA, Inc.
Suite 200
Lomita, CA 90717
New Wireless Modbus Data Concentrator for Working with SCADA System
MDC-211-WF reduces the Ethernet network traffic load and improves system efficiency. Features Ethernet, RS-232 and RS-485 communication interfaces and Wi-Fi capabilities. Used to link multiple Modbus RTU devices to an Ethernet control/communication network.
Read More »
New Data Loggers for Wet and Humid Outdoor Applications
DL-100S models available with a combination of temperature, humidity and dew point sensors. Onboard storage keeps a record of up to 600,000 sensor readings. Offered with software utility that can be used to configure the modules and monitor real-time data.
Read More »
New PET-7H16M Provides 4 kV ESD Protection
Includes 8 high-speed analog input channels with a FIFO of 2048 samples and a maximum sampling rate of up to 200 kS/s. Supports software trigger, external clock trigger and external digital signal event trigger modes for A/D conversion. Provides a programmable input range on all analog Input channels.
Read More »
Modbus TCP to RTU Gateway offers 2,500 Vdc isolation.
Providing 1 PoE port and 3 RS-485 ports, Model tGW-735i allows Modbus TCP host to communicate with up to 3 serial Modbus RTU/ASCII devices through Ethernet network. Gateway is equipped with 32-bit MCU, built-in web server, and support for DHCP client function. It can be used to create pair-connection application, and can then route data over TCP/IP between 2 serial Modbus RTU/ASCII devices....
Read More »
Data Loggers can monitor data via wire or wirelessly.
Designed for factory, greenhouse, home, and building automation, DL-300 Series accurately measures and logs concentration of carbon dioxide, carbon monoxide, temperature, humidity, and dew point in air. Built-in alarm relay output can trigger alarms when concentrations are too high or too low. Loggers support both Modbus RTU/TCP and DCON protocol, enabling integration with other I/O and SCADA...
Read More »
Wi-Fi I/O Module provides 14-channel relay output.
Featuring WLAN connection that complies with IEEE802.11b/g standards, Model WFM-R14 enables wireless connectivity to be incorporated into monitoring and control systems. Unit also supports Modbus TCP and UDP protocols and network encryption configuration. With 2-channel Form A power relay output and 12-channel Form C power relay output, WFM-R14 can be used with other remote I/O and PLC’s and...
Read More »
CANopen Remote I/O Unit offers 8 I/O expansion slots.
Designed for CANopen protocol slave devices, CAN-8823- is based on flexible CAN bus technology and CANopen DSP-306. Control units, which- work with ICP DAS USA analog and digital remote I/O modules, comply with CANopen specifications of DS-301 V4.02 and DSP-401 V2.1 and come with utility for dynamic creation of EDS files. Features include dynamic Process Data Objects, EMCY object, error output...
Read More »Smart IoT Controller broadens I/O support and promotes usability.
As control unit for use in remote logic control and monitoring in industrial applications, WISE-5231 (Web Inside, Smart Engine) offers usability-optimized Web interface that- lets users implement IF-THEN-ELSE control logic on controllers without requiring any programming. I/O allows concurrent connection to XV-board, remote I/O modules, and Modbus TCP/RTU Slave modules. Other features include...
Read More »
Quad-Band WCDMA Modem supports 3G network.
Equipped with RS-232 and USB interfaces, Model GTM-203M-3GWA operates on Quad-band WCDMA 850/900/1,900/2,100 MHz and Quad-band GSM 850/900/1,800/1,900 MHz frequencies. Unit is capable of switching between 3G or GPRS signals to maintain continuous connection. With integrated TCP and UDP/IP stack, GTM-203M-3GWA can work with simple controllers that have serial communication ports, and with voice...
Read More »
M2M Programmable Automation Controller incorporates solar charger.
Along with solar charger to help conserve power, G-4513PD-3GWA programmable automation controller (PAC) is equipped with built-in RTC and LCD for viewing status at-a-glance. As- 3G controller, it supports GSM 850/900/1,800/1,900 MHz and WCDMA 850/900/1,900/2,100 MHz for connection with mobile phones and devices. Communication capabilities, including RS-232, RS-485, and Ethernet,- foster...
Read More »
New Wireless Modbus Data Concentrator for Working with SCADA System
MDC-211-WF reduces the Ethernet network traffic load and improves system efficiency. Features Ethernet, RS-232 and RS-485 communication interfaces and Wi-Fi capabilities. Used to link multiple Modbus RTU devices to an Ethernet control/communication network.
Read More »ICP DAS USA Announces New Website Design
LOMITA, CA— The tech and marketing teams at ICP DAS USA are working harder than ever to bring customers a new and improved online experience. ICP DAS USA’s growing catalogue tops 1,000 entries, necessitating a new approach to user experience with for online home icpdas-usa.com. The first phase of a planned site-wide redesign is available to the public now at icpdas-usa.com. “Clean user...
Read More »
New Data Loggers for Wet and Humid Outdoor Applications
DL-100S models available with a combination of temperature, humidity and dew point sensors. Onboard storage keeps a record of up to 600,000 sensor readings. Offered with software utility that can be used to configure the modules and monitor real-time data.
Read More »
New PET-7H16M Provides 4 kV ESD Protection
Includes 8 high-speed analog input channels with a FIFO of 2048 samples and a maximum sampling rate of up to 200 kS/s. Supports software trigger, external clock trigger and external digital signal event trigger modes for A/D conversion. Provides a programmable input range on all analog Input channels.
Read More »
Modbus TCP to RTU Gateway offers 2,500 Vdc isolation.
Providing 1 PoE port and 3 RS-485 ports, Model tGW-735i allows Modbus TCP host to communicate with up to 3 serial Modbus RTU/ASCII devices through Ethernet network. Gateway is equipped with 32-bit MCU, built-in web server, and support for DHCP client function. It can be used to create pair-connection application, and can then route data over TCP/IP between 2 serial Modbus RTU/ASCII devices....
Read More »
Data Loggers can monitor data via wire or wirelessly.
Designed for factory, greenhouse, home, and building automation, DL-300 Series accurately measures and logs concentration of carbon dioxide, carbon monoxide, temperature, humidity, and dew point in air. Built-in alarm relay output can trigger alarms when concentrations are too high or too low. Loggers support both Modbus RTU/TCP and DCON protocol, enabling integration with other I/O and SCADA...
Read More »
Wi-Fi I/O Module provides 14-channel relay output.
Featuring WLAN connection that complies with IEEE802.11b/g standards, Model WFM-R14 enables wireless connectivity to be incorporated into monitoring and control systems. Unit also supports Modbus TCP and UDP protocols and network encryption configuration. With 2-channel Form A power relay output and 12-channel Form C power relay output, WFM-R14 can be used with other remote I/O and PLC’s and...
Read More »
CANopen Remote I/O Unit offers 8 I/O expansion slots.
Designed for CANopen protocol slave devices, CAN-8823- is based on flexible CAN bus technology and CANopen DSP-306. Control units, which- work with ICP DAS USA analog and digital remote I/O modules, comply with CANopen specifications of DS-301 V4.02 and DSP-401 V2.1 and come with utility for dynamic creation of EDS files. Features include dynamic Process Data Objects, EMCY object, error output...
Read More »Smart IoT Controller broadens I/O support and promotes usability.
As control unit for use in remote logic control and monitoring in industrial applications, WISE-5231 (Web Inside, Smart Engine) offers usability-optimized Web interface that- lets users implement IF-THEN-ELSE control logic on controllers without requiring any programming. I/O allows concurrent connection to XV-board, remote I/O modules, and Modbus TCP/RTU Slave modules. Other features include...
Read More »
Quad-Band WCDMA Modem supports 3G network.
Equipped with RS-232 and USB interfaces, Model GTM-203M-3GWA operates on Quad-band WCDMA 850/900/1,900/2,100 MHz and Quad-band GSM 850/900/1,800/1,900 MHz frequencies. Unit is capable of switching between 3G or GPRS signals to maintain continuous connection. With integrated TCP and UDP/IP stack, GTM-203M-3GWA can work with simple controllers that have serial communication ports, and with voice...
Read More »