Hilti, Inc.

Construction Equipment and Supplies

New BX 3-BT Nailers for Metal Deck Construction

X-BT threaded studs for hanging strut, attaching bar grating or grounding a cable lug. Top Track Seal CFS-TTS MD provides firestop smoke and sound seal for head-of-wall joints between top track and gypsum to corrugated metal deck slabs and metal roof decks. Cordless shears SSH 6-A22 uses two separate cutting edges to remove thin strips of material and is equipped with a chip clipper.

Read More »
New Cordless Breaker for Breaking Concrete and Masonry
Chemicals & Gases

New Cordless Breaker for Breaking Concrete and Masonry

TE 500-A36 is powered by high capacity 36-volt 9.0 ah lithium-ion battery and high efficiency brushless motor. Active Vibration Reduction technology reduces tool's triaxial vibration over 30% and helps keep contractors productive. Couples with VC 75-A22 cordless backpack vacuum system for OSHA compliant virtually dustless solution that allows users to fully cut the cord.

Read More »
Fasteners & Hardware

Gas-Actuated Fastening System facilitates overhead work.

Intended for professionals in electrical and mechanical installation trades, GX 120-ME system facilitates installation applications in various base materials. Aluminum pole tube assembly, X-PT GX 120-ME, installs fastening elements overhead and can be extended/retracted in 1-3 ft sections. Ceiling wire assemblies in GX 120-ME are available in 4, 6, 8, 10, and 12 ft for fastening conduits, cables,...

Read More »
Zip Screws deliver off-angle fastening for HVAC ductwork.
Fasteners & Hardware

Zip Screws deliver off-angle fastening for HVAC ductwork.

Intended for HVAC duct fabrication and installation, S-MS HVAC Zip Screws utilize HyperThread technology, which provides tapered point and shank for consistent driving with almost no metal filings. Self-piercing units are capable of being driven at angles up to 30°. Made of carbon steel with zinc electroplating, screws come in No. 8 S-MS size driven with ¼ in. drive for 20-28 gauge...

Read More »
Adhesives & Sealants

Adhesive Anchor System is qualified for all seismic zones.

Hilti HIT-HY 150 MAX-SD features cure time for cracked concrete and seismic conditions of 30 min at 68°F, has minimum base material installation temperature of 14°F, and can be used in applications where concrete temperatures reach 162°F. Product supports applications with 3/8-1 in. dia threaded rods or #3-#8 rebar. It is designed for installation of rebar in various...

Read More »
Construction Grouts come in 3 types.
Adhesives & Sealants

Construction Grouts come in 3 types.

Engineered for structural design and installation communities, Construction Grouts include Multipurpose and Precision Grouts, which meet ASTM C-1107 and CRD-C621 non-shrink standards, and 3-component Epoxy Grout, which is both VOC- and butyl glycidyl ether-free. Products are suitable for baseplate filling, bridge repair, doweling/rebar, machine pad formation, railings, and posts.

Read More »
Rotating Laser Level features built-in alignment system.
Electronic Components & Devices

Rotating Laser Level features built-in alignment system.

Featuring green laser technology for optimal visibility in indoor applications, Hilti PR 26 Rotating Laser has range up to 650 ft with laser receiver. Built-in line function allows user's hands to remain free for other tasks once laser is set to correct height. Equipped rechargeable battery pack and charger, tool provides 22 hr of continuous working time/full charge. Built-in shock warning system...

Read More »
Decking Tool accelerates metal decking installation.
Controls & Controllers

Decking Tool accelerates metal decking installation.

Designed to work with range of collated fasteners, Hilti SDT 30 Stand-up Decking Tool allows operators to work upright at all times, and can load up to 50 collated fasteners at one time. SDT 30 gives operators flexibility to complete both sidelap and thin bar joist applications with just one tool. It accepts ST 1800 Metal Screwdriver with adjustable torque clutch, allowing operators to set...

Read More »
Mergers & Acquisitions

Hilti Expands Smart Product Offering with Acquisition of Assets of Concrete Technology Startup; Further Builds on the Efficiency Promise of End-to-End Connected Jobsites

PLANO, Texas, March 11, 2020 /PRNewswire/ -- Hilti, a global leader providing innovative tools, technology, software and services to the commercial construction industry has acquired substantially all of the assets of Concrete Sensors, a provider of connected (i.e., "smart") devices, software and services that help enable improved decision making and accelerated construction schedules...

Read More »
Construction Equipment and Supplies

New BX 3-BT Nailers for Metal Deck Construction

X-BT threaded studs for hanging strut, attaching bar grating or grounding a cable lug. Top Track Seal CFS-TTS MD provides firestop smoke and sound seal for head-of-wall joints between top track and gypsum to corrugated metal deck slabs and metal roof decks. Cordless shears SSH 6-A22 uses two separate cutting edges to remove thin strips of material and is equipped with a chip clipper.

Read More »
New Cordless Breaker for Breaking Concrete and Masonry
Chemicals & Gases

New Cordless Breaker for Breaking Concrete and Masonry

TE 500-A36 is powered by high capacity 36-volt 9.0 ah lithium-ion battery and high efficiency brushless motor. Active Vibration Reduction technology reduces tool's triaxial vibration over 30% and helps keep contractors productive. Couples with VC 75-A22 cordless backpack vacuum system for OSHA compliant virtually dustless solution that allows users to fully cut the cord.

Read More »
Fasteners & Hardware

Gas-Actuated Fastening System facilitates overhead work.

Intended for professionals in electrical and mechanical installation trades, GX 120-ME system facilitates installation applications in various base materials. Aluminum pole tube assembly, X-PT GX 120-ME, installs fastening elements overhead and can be extended/retracted in 1-3 ft sections. Ceiling wire assemblies in GX 120-ME are available in 4, 6, 8, 10, and 12 ft for fastening conduits, cables,...

Read More »
Zip Screws deliver off-angle fastening for HVAC ductwork.
Fasteners & Hardware

Zip Screws deliver off-angle fastening for HVAC ductwork.

Intended for HVAC duct fabrication and installation, S-MS HVAC Zip Screws utilize HyperThread technology, which provides tapered point and shank for consistent driving with almost no metal filings. Self-piercing units are capable of being driven at angles up to 30°. Made of carbon steel with zinc electroplating, screws come in No. 8 S-MS size driven with ¼ in. drive for 20-28 gauge...

Read More »
Adhesives & Sealants

Adhesive Anchor System is qualified for all seismic zones.

Hilti HIT-HY 150 MAX-SD features cure time for cracked concrete and seismic conditions of 30 min at 68°F, has minimum base material installation temperature of 14°F, and can be used in applications where concrete temperatures reach 162°F. Product supports applications with 3/8-1 in. dia threaded rods or #3-#8 rebar. It is designed for installation of rebar in various...

Read More »
Construction Grouts come in 3 types.
Adhesives & Sealants

Construction Grouts come in 3 types.

Engineered for structural design and installation communities, Construction Grouts include Multipurpose and Precision Grouts, which meet ASTM C-1107 and CRD-C621 non-shrink standards, and 3-component Epoxy Grout, which is both VOC- and butyl glycidyl ether-free. Products are suitable for baseplate filling, bridge repair, doweling/rebar, machine pad formation, railings, and posts.

Read More »
Rotating Laser Level features built-in alignment system.
Electronic Components & Devices

Rotating Laser Level features built-in alignment system.

Featuring green laser technology for optimal visibility in indoor applications, Hilti PR 26 Rotating Laser has range up to 650 ft with laser receiver. Built-in line function allows user's hands to remain free for other tasks once laser is set to correct height. Equipped rechargeable battery pack and charger, tool provides 22 hr of continuous working time/full charge. Built-in shock warning system...

Read More »

All Topics