General Equipment Company

FCS18 RIP-R-Stripper offers removal rate up to 720 sq-ft of material per hour.
Cleaning Products & Equipment

FCS18 RIP-R-Stripper offers removal rate up to 720 sq-ft of material per hour.

FCS18 RIP-R-Stripper is equipped with ¾ HP electric blade motor and 1/3 HP electric drive motors. Unit features heavy-duty unitized, welded steel-plate frame and comes with 50 ft extension cord, 2 x 10 in. straight blade with 6 in. cutting edge and 2 x 11 in. straight blade. Stripper’s exciter plate mounted to motor driveshaft transfers maximum power to material removed through orbital action....

Read More »
AF500 AIR-SCRUB-R™ HEPA Air Filter weighs 33 lbs.
Electronic Components & Devices

AF500 AIR-SCRUB-R™ HEPA Air Filter weighs 33 lbs.

AF500 AIR-SCRUB-R™ Portable HEPA Air Filter features clean filter indicator light and 16 in. diameter inlet. Unit is equipped with ¼-horsepower, 115 VAC variable speed electric motor and comes in UV-resistant polyethylene housing. Suitable for residential, commercial and industrial applications, product comes with two-stage design, pre and secondary filters. Air filter is used to remove...

Read More »
Portable Vacuum System comes with clean filter indicator light.
Cleaning Products & Equipment

Portable Vacuum System comes with clean filter indicator light.

Constructed of high-density polyurethane with a steel frame, VS220 Portable Vacuum System features 2 and 3 in. diameter dust port connections. Unit can be maneuvered with 5 in. diameter casters and is powered by two, 115 VAC, 60 Hz single-speed electric motors which delivers power of 2.6 hp. Product produces an air flow volume of 220 CFM and water lift suction of 110 in. Vacuum system’s dust...

Read More »
Surface Planer features max cutting depth of 5/8 in.
Machinery & Machining Tools

Surface Planer features max cutting depth of 5/8 in.

Powered by 9.0 hp Honda® GX270 4-stroke gasoline engine, SP8/GH9HP Surface Planer is built with unitized, welded steel plate frame and full length hexagon driveshaft. Unit has max cutting width of 8 in. and cutting proximity to vertical wall of 3 -¼ in. Bearings are externally greased to extend service life, and cutting depth is adjusted using screw-type, positive-locking depth selector....

Read More »
Floor Stripper accommodates breakers from 30-45 lb-ft force.
Cleaning Products & Equipment

Floor Stripper accommodates breakers from 30-45 lb-ft force.

Operating from 115 Vac, 15 A power source, CTS12 RIP-R-STRIPPER® Gen 2 is suitable for removing ceramic tile, hardwood flooring, and other tough floor coverings. Unit allows users to operate electric-powered breakers in upright position, and includes mechanism that accommodates breaker variances in mounted chisel orientation to working surface. This allows adjustment of both wheels, keeping...

Read More »
Hole Digger delivers max drilling torque of 154 lb-ft.
Construction Equipment and Supplies

Hole Digger delivers max drilling torque of 154 lb-ft.

Equipped with Briggs- & Stratton 190 cc, 4.5 hp gas engine, M235 Two-Man Hole Digger is suited for variety of soil types. Oil-cooled transmission includes centrifugal all-metal clutch and machine-cut spur gears with 1 in. diameter output shaft. With transmission lock feature, stuck auger can be removed from ground without disconnecting power unit. Gen 2 Comfort-Flex operator handle...

Read More »
Tower Light offers inflatable, temporary lighting solution.

Tower Light offers inflatable, temporary lighting solution.

Suitable for both large and confined areas, Tower Light offers operational heights of 7.5, 10, and 14 ft, providing 360°, diffused, glare-free illumination while minimizing shadows. Cylindrical load-bearing nylon tower is inflated with constant air pressure delivered by integral blower system. Designed for indoor/outdoor use, light can operate from 115 Vac, 60 Hz electrical power source or...

Read More »
Surface Grinder can be used in diverse range of applications.
Machinery & Machining Tools

Surface Grinder can be used in diverse range of applications.

Used for removing paint, thin set, adhesives, mastics, and other floor coatings, 55 lb SG7 features high-speed polisher and utilizes 7 in. dia diamond segment discs. Dual gas shocks dampen grinding forces and help produce level surfaces, while ergonomic frame lets operator work in fully upright position. Handle offers vertical height adjustment and allows use from either side of machine. When...

Read More »
Earth Auger complements portable, hand-held hole diggers.
Machinery & Machining Tools

Earth Auger complements portable, hand-held hole diggers.

Cast into one-piece, integral assembly from steel to promote service life, 4450 Series serves such industries as rental, fencing, landscaping, and general construction. Screw bit design has male shaft that slides into end of earth auger, accelerating installation process, and reduces risk of screw bit breaking as well as resulting damage to auger. Tooth position and location on screw bits have...

Read More »
General Equipment Company Offers New Engines on Its One-Man Hole Diggers
Construction Equipment and Supplies

General Equipment Company Offers New Engines on Its One-Man Hole Diggers

OWATONNA, Minn. - General Equipment Company announced that it would use Honda GX35 all-position, four-stroke engines on its 240 Hole Diggers. The GX35 is an air-cooled, 35.8-cubic-centimeter-displacement engine that provides 1.3 net horsepower, and produces a maximum drilling torque of 50 ft-lbs. (68 N.m.). The all-position feature of the engine allows the 240 to be operated and stored in any...

Read More »
FCS18 RIP-R-Stripper offers removal rate up to 720 sq-ft of material per hour.
Cleaning Products & Equipment

FCS18 RIP-R-Stripper offers removal rate up to 720 sq-ft of material per hour.

FCS18 RIP-R-Stripper is equipped with ¾ HP electric blade motor and 1/3 HP electric drive motors. Unit features heavy-duty unitized, welded steel-plate frame and comes with 50 ft extension cord, 2 x 10 in. straight blade with 6 in. cutting edge and 2 x 11 in. straight blade. Stripper’s exciter plate mounted to motor driveshaft transfers maximum power to material removed through orbital action....

Read More »
AF500 AIR-SCRUB-R™ HEPA Air Filter weighs 33 lbs.
Electronic Components & Devices

AF500 AIR-SCRUB-R™ HEPA Air Filter weighs 33 lbs.

AF500 AIR-SCRUB-R™ Portable HEPA Air Filter features clean filter indicator light and 16 in. diameter inlet. Unit is equipped with ¼-horsepower, 115 VAC variable speed electric motor and comes in UV-resistant polyethylene housing. Suitable for residential, commercial and industrial applications, product comes with two-stage design, pre and secondary filters. Air filter is used to remove...

Read More »
Portable Vacuum System comes with clean filter indicator light.
Cleaning Products & Equipment

Portable Vacuum System comes with clean filter indicator light.

Constructed of high-density polyurethane with a steel frame, VS220 Portable Vacuum System features 2 and 3 in. diameter dust port connections. Unit can be maneuvered with 5 in. diameter casters and is powered by two, 115 VAC, 60 Hz single-speed electric motors which delivers power of 2.6 hp. Product produces an air flow volume of 220 CFM and water lift suction of 110 in. Vacuum system’s dust...

Read More »
Surface Planer features max cutting depth of 5/8 in.
Machinery & Machining Tools

Surface Planer features max cutting depth of 5/8 in.

Powered by 9.0 hp Honda® GX270 4-stroke gasoline engine, SP8/GH9HP Surface Planer is built with unitized, welded steel plate frame and full length hexagon driveshaft. Unit has max cutting width of 8 in. and cutting proximity to vertical wall of 3 -¼ in. Bearings are externally greased to extend service life, and cutting depth is adjusted using screw-type, positive-locking depth selector....

Read More »
Floor Stripper accommodates breakers from 30-45 lb-ft force.
Cleaning Products & Equipment

Floor Stripper accommodates breakers from 30-45 lb-ft force.

Operating from 115 Vac, 15 A power source, CTS12 RIP-R-STRIPPER® Gen 2 is suitable for removing ceramic tile, hardwood flooring, and other tough floor coverings. Unit allows users to operate electric-powered breakers in upright position, and includes mechanism that accommodates breaker variances in mounted chisel orientation to working surface. This allows adjustment of both wheels, keeping...

Read More »
Hole Digger delivers max drilling torque of 154 lb-ft.
Construction Equipment and Supplies

Hole Digger delivers max drilling torque of 154 lb-ft.

Equipped with Briggs- & Stratton 190 cc, 4.5 hp gas engine, M235 Two-Man Hole Digger is suited for variety of soil types. Oil-cooled transmission includes centrifugal all-metal clutch and machine-cut spur gears with 1 in. diameter output shaft. With transmission lock feature, stuck auger can be removed from ground without disconnecting power unit. Gen 2 Comfort-Flex operator handle...

Read More »
Tower Light offers inflatable, temporary lighting solution.

Tower Light offers inflatable, temporary lighting solution.

Suitable for both large and confined areas, Tower Light offers operational heights of 7.5, 10, and 14 ft, providing 360°, diffused, glare-free illumination while minimizing shadows. Cylindrical load-bearing nylon tower is inflated with constant air pressure delivered by integral blower system. Designed for indoor/outdoor use, light can operate from 115 Vac, 60 Hz electrical power source or...

Read More »
Surface Grinder can be used in diverse range of applications.
Machinery & Machining Tools

Surface Grinder can be used in diverse range of applications.

Used for removing paint, thin set, adhesives, mastics, and other floor coatings, 55 lb SG7 features high-speed polisher and utilizes 7 in. dia diamond segment discs. Dual gas shocks dampen grinding forces and help produce level surfaces, while ergonomic frame lets operator work in fully upright position. Handle offers vertical height adjustment and allows use from either side of machine. When...

Read More »
Earth Auger complements portable, hand-held hole diggers.
Machinery & Machining Tools

Earth Auger complements portable, hand-held hole diggers.

Cast into one-piece, integral assembly from steel to promote service life, 4450 Series serves such industries as rental, fencing, landscaping, and general construction. Screw bit design has male shaft that slides into end of earth auger, accelerating installation process, and reduces risk of screw bit breaking as well as resulting damage to auger. Tooth position and location on screw bits have...

Read More »
General Equipment Company Offers New Engines on Its One-Man Hole Diggers
Construction Equipment and Supplies

General Equipment Company Offers New Engines on Its One-Man Hole Diggers

OWATONNA, Minn. - General Equipment Company announced that it would use Honda GX35 all-position, four-stroke engines on its 240 Hole Diggers. The GX35 is an air-cooled, 35.8-cubic-centimeter-displacement engine that provides 1.3 net horsepower, and produces a maximum drilling torque of 50 ft-lbs. (68 N.m.). The all-position feature of the engine allows the 240 to be operated and stored in any...

Read More »

All Topics