FCT Assembly

Paints & Coatings

FCT Assembly's NanoSlic Stencil Coating Recognized for its Electronics Assembly Innovation

Enabling Chemistry Further Validated with Global Technology Award, Expanded Licensing Agreements and Customer Acceptance At last week's Productronica event held in Munich, Germany, FCT Assembly was honored with a Global Technology Award for its new, VOC-free stencil coating, NanoSlic® (www.nanoslic.com). This award win comes on the heels of several successes for NanoSlic, including...

Read More »
FCT Assembly to Exhibit at Local SMTA Rocky Mountain Expo
Labels Tags Signage & Equipment

FCT Assembly to Exhibit at Local SMTA Rocky Mountain Expo

GREELEY, COÂ- – FCT Assembly today announced plans to exhibit at the SMTA Rocky Mountain Expo Tech Forum, scheduled to take place Wednesday, Jan. 28, 2015 at the West Club at Mile High Stadium in Denver, CO. Solder experts will be available to discuss FCT’s NanoSlic® Gold stencil and line of solution driven solder pastes. The NanoSlic® Gold stencil is the next generation of...

Read More »
A-Laser to Highlight New Capability for the MID Market at the BIOMEDevice Show
Electronic Components & Devices

A-Laser to Highlight New Capability for the MID Market at the BIOMEDevice Show

Milpitas, CA — FCT Assembly announces that the A-Laser Division will discuss its new laser direct structuring (LDS) capability in Booth #235 at the BIOMEDevice Show, scheduled to take place December 3-4, 2014 at the San Jose Convention Center in California. The introduction of laser direct structuring (LDS) has revolutionized the molded interconnect device (MID) market, bringing flexibility to...

Read More »
FCT Assembly to Exhibit Solution Driven Solder Pastes at SMTA Space Coast
Agricultural & Farming Products

FCT Assembly to Exhibit Solution Driven Solder Pastes at SMTA Space Coast

GREELEY, COÂ- – FCT Assembly today announced plans to exhibit at the Space Coast and Tampa Bay Expo Tech Forum, scheduled to take place Thursday, December 4, 2014 at the Park Inn by Radisson in Kissimmee, FL. Solder expert Rodney Wade will be available to discuss FCT’s NanoSlic® Gold stencil and line of solution-driven solder pastes. The NanoSlic® Gold stencil is the next...

Read More »
3D Circuitry Manufacturing leverages LDS process.
Electrical Equipment & Systems

3D Circuitry Manufacturing leverages LDS process.

Laser direct structuring (LDS)Â- enhances molded interconnect device (MID) design flexibility and product capability. In LDS process, part is normally made from plastic material containing LDS additive. Laser then etches conductive trace structures onto any properly designed surface. Initial copper layer, followed by nickel and gold layers, are built up on these...

Read More »
Labels Tags Signage & Equipment

FCT Assembly to Exhibit Innovative Pastes and Stencils at OctoberBest

GREELEY, CO — FCT Assembly today announced plans to exhibit in Booth # I105 at OctoberBest 2014, scheduled to take place Wednesday, October 1, 2014 at Tektronix in Beaverton, OR. Derek Stuart, FCT's National Sales Manager, will be available to discuss the complete line of solution driven solder pastes and stencils. FCT Assembly offers solder pastes that are specially formulated to solve...

Read More »
FCT Assembly to Exhibit Solution-Driven Solder Pastes at the SMTA Capital Expo
Materials

FCT Assembly to Exhibit Solution-Driven Solder Pastes at the SMTA Capital Expo

GREELEY, CO - FCT Assembly today announced plans to exhibit at the SMTA Capital Expo Tech Forum, scheduled to take place Tuesday, September 9, 2014 at the John Hopkins University/Applied Physics Lab in Laurel, MD. Solder experts Rodney Wade and Dinesh Patel will be available to discuss FCT’s line of solution driven solder pastes. FCT Assembly offers solder pastes that are specially formulated...

Read More »
FCT Assembly to Demonstrate NanoSlic® Gold Stencil at SMTAI
Labels Tags Signage & Equipment

FCT Assembly to Demonstrate NanoSlic® Gold Stencil at SMTAI

REELEY, CO - FCT Assembly will exhibit in Booth #221 at SMTA International, scheduled to take place Sep. 30 - Oct. 1, 2014 at the Donald Stephens Convention Center in Rosemont, IL. Company representatives will be on site to answer any questions about FCT’s stencils and its new coating technology. The NanoSlic® technology significantly improves solder paste transfer efficiencies for small...

Read More »
Paints & Coatings

FCT Assembly's NanoSlic Stencil Coating Recognized for its Electronics Assembly Innovation

Enabling Chemistry Further Validated with Global Technology Award, Expanded Licensing Agreements and Customer Acceptance At last week's Productronica event held in Munich, Germany, FCT Assembly was honored with a Global Technology Award for its new, VOC-free stencil coating, NanoSlic® (www.nanoslic.com). This award win comes on the heels of several successes for NanoSlic, including...

Read More »
FCT Assembly to Exhibit at Local SMTA Rocky Mountain Expo
Labels Tags Signage & Equipment

FCT Assembly to Exhibit at Local SMTA Rocky Mountain Expo

GREELEY, COÂ- – FCT Assembly today announced plans to exhibit at the SMTA Rocky Mountain Expo Tech Forum, scheduled to take place Wednesday, Jan. 28, 2015 at the West Club at Mile High Stadium in Denver, CO. Solder experts will be available to discuss FCT’s NanoSlic® Gold stencil and line of solution driven solder pastes. The NanoSlic® Gold stencil is the next generation of...

Read More »
A-Laser to Highlight New Capability for the MID Market at the BIOMEDevice Show
Electronic Components & Devices

A-Laser to Highlight New Capability for the MID Market at the BIOMEDevice Show

Milpitas, CA — FCT Assembly announces that the A-Laser Division will discuss its new laser direct structuring (LDS) capability in Booth #235 at the BIOMEDevice Show, scheduled to take place December 3-4, 2014 at the San Jose Convention Center in California. The introduction of laser direct structuring (LDS) has revolutionized the molded interconnect device (MID) market, bringing flexibility to...

Read More »
FCT Assembly to Exhibit Solution Driven Solder Pastes at SMTA Space Coast
Agricultural & Farming Products

FCT Assembly to Exhibit Solution Driven Solder Pastes at SMTA Space Coast

GREELEY, COÂ- – FCT Assembly today announced plans to exhibit at the Space Coast and Tampa Bay Expo Tech Forum, scheduled to take place Thursday, December 4, 2014 at the Park Inn by Radisson in Kissimmee, FL. Solder expert Rodney Wade will be available to discuss FCT’s NanoSlic® Gold stencil and line of solution-driven solder pastes. The NanoSlic® Gold stencil is the next...

Read More »
3D Circuitry Manufacturing leverages LDS process.
Electrical Equipment & Systems

3D Circuitry Manufacturing leverages LDS process.

Laser direct structuring (LDS)Â- enhances molded interconnect device (MID) design flexibility and product capability. In LDS process, part is normally made from plastic material containing LDS additive. Laser then etches conductive trace structures onto any properly designed surface. Initial copper layer, followed by nickel and gold layers, are built up on these...

Read More »
Labels Tags Signage & Equipment

FCT Assembly to Exhibit Innovative Pastes and Stencils at OctoberBest

GREELEY, CO — FCT Assembly today announced plans to exhibit in Booth # I105 at OctoberBest 2014, scheduled to take place Wednesday, October 1, 2014 at Tektronix in Beaverton, OR. Derek Stuart, FCT's National Sales Manager, will be available to discuss the complete line of solution driven solder pastes and stencils. FCT Assembly offers solder pastes that are specially formulated to solve...

Read More »
FCT Assembly to Exhibit Solution-Driven Solder Pastes at the SMTA Capital Expo
Materials

FCT Assembly to Exhibit Solution-Driven Solder Pastes at the SMTA Capital Expo

GREELEY, CO - FCT Assembly today announced plans to exhibit at the SMTA Capital Expo Tech Forum, scheduled to take place Tuesday, September 9, 2014 at the John Hopkins University/Applied Physics Lab in Laurel, MD. Solder experts Rodney Wade and Dinesh Patel will be available to discuss FCT’s line of solution driven solder pastes. FCT Assembly offers solder pastes that are specially formulated...

Read More »
FCT Assembly to Demonstrate NanoSlic® Gold Stencil at SMTAI
Labels Tags Signage & Equipment

FCT Assembly to Demonstrate NanoSlic® Gold Stencil at SMTAI

REELEY, CO - FCT Assembly will exhibit in Booth #221 at SMTA International, scheduled to take place Sep. 30 - Oct. 1, 2014 at the Donald Stephens Convention Center in Rosemont, IL. Company representatives will be on site to answer any questions about FCT’s stencils and its new coating technology. The NanoSlic® technology significantly improves solder paste transfer efficiencies for small...

Read More »

All Topics