Pneumadyne, Inc.

New Pilot Operated Check Valves from Pneumadyne, Inc.
Fluid & Gas Flow Equipment

New Pilot Operated Check Valves from Pneumadyne, Inc.

Pneumadyne's new Pilot Operated Check Valves are ideal for reliably holding an actuator position in a variety of applications. These rugged valves feature a 1/4 or 1/8 NPT output port which mounts directly on a cylinder, minimizing space requirements and easing installation. The input port swivels to accommodate valve alignment and contains a 1/4 push-in or 1/8 NPT (F) connection to speed tubing...

Read More »
Static Bulkhead Connectors connect multiple tubing lines.
Construction Equipment and Supplies

Static Bulkhead Connectors connect multiple tubing lines.

Designed to connect tubing lines in control panel or machine, Static Bulkhead Connectors feature 1-piece design, with Â-¼ and 5/32 push-in connectors or ¼-28 UNF threads, that accommodates 4-12 tubing lines. Port numbers are etched into both sides of unit to simplify installation and identification. Black anodized for corrosion and wear resistance, device includes Buna-N o-ring to...

Read More »
Solenoid/Air Pilot Operated Valves feature 1/8 NPT ports.
Fluid & Gas Flow Equipment

Solenoid/Air Pilot Operated Valves feature 1/8 NPT ports.

Available in 3-way and 4-way configurations with 1/8 NPT (F) ports, 22 Series Valves provide flow rate of 40 scfm at 125 psi and feature single or double air pilot and solenoid operators. Rated at 1 W, 15 mm solenoid valves offer variety of connector and voltage options, while 4-way valves include 3-position version with closed or exhaust centers. Machined via PneuTef(TM) process allows valves to...

Read More »
Valves work with lubricated and non-lubricated air.
Fluid & Gas Flow Equipment

Valves work with lubricated and non-lubricated air.

Available in 3-way and 4-way configurations with 1/8 NPT ports, 22 Series provides flow rate of 40 scfm at 125 psi and features single or double air pilot and solenoid operators. Four-way models include 3-position version with either closed or exhaust centers, and 1 W, 15 mm solenoid valves offer variety of connector and voltage options. Special seal material accommodates low temperature...

Read More »
Fluid & Gas Flow Equipment

Latching Solenoid Valves suit low-power applications.

Suited for applications that require low power consumption, 10 and 15 mm Latching Solenoid Valves do not need continuous power to maintain position. Response times allow momentary pulse to activate and de-activate valves. Direct-acting, 2- and 3-way valves have operating pressure of vacuum to 150 psi. Single to 12-station manifolds are available with 10-32 (F) or M5 (F) threads, and 12 and 24 Vdc...

Read More »
Fittings offer single-barb design.
Fluid & Gas Flow Equipment

Fittings offer single-barb design.

Pneu-Edge(TM) fittings feature sharp, single-barb design that provides tight grip and seal. Precision machined barbs ensure permanent tubing installation without need for clamps. Straight connectors, tees, elbows, crosses, and couplings are available to accommodate various fluid handling circuits.

Read More »
Solenoid Valves are suited for varied applications.
Fluid & Gas Flow Equipment

Solenoid Valves are suited for varied applications.

Miniature, 10 and 15 mm, direct-acting solenoid valves provide space-saving solution for use of single or multiple valves. Lightweight, 2- and 3-way valves are available with various voltages, orifices, and connectors to fit design requirements. Mounting versatility is provided through use of aluminum or acrylic multiple-station manifolds or single bases.

Read More »
Mergers & Acquisitions

Bimba Announces Acquisition of Pneumadyne, Inc.

University Park, IL - Bimba Manufacturing Company, an industry- leading provider of pneumatic, hydraulic and electric solutions, today announced the completion of its acquisition of Pneumadyne, Inc. Headquartered in Plymouth, MN, Pneumadyne, has been an innovative manufacturer of pneumatic components and control systems for over 35 years. Their products are used for fluid control by a wide...

Read More »
New Pilot Operated Check Valves from Pneumadyne, Inc.
Fluid & Gas Flow Equipment

New Pilot Operated Check Valves from Pneumadyne, Inc.

Pneumadyne's new Pilot Operated Check Valves are ideal for reliably holding an actuator position in a variety of applications. These rugged valves feature a 1/4 or 1/8 NPT output port which mounts directly on a cylinder, minimizing space requirements and easing installation. The input port swivels to accommodate valve alignment and contains a 1/4 push-in or 1/8 NPT (F) connection to speed tubing...

Read More »
Company News

Manufacturer of Miniature Pneumatics Ranks Number Two in Quality

Records on scrap, rework and training at 800+ companies are evaluated. Plymouth, Minn., June 25, 2010-Pneumadyne, Inc., a manufacturer of miniature pneumatic products, has been named to Quality Magazine's Quality Leadership 100 list for 2010. Of the 100 companies named on this prestigious list, Pneumadyne, Inc. is number two. More than 800 manufacturers participating in the Quality Leadership 100...

Read More »
Static Bulkhead Connectors connect multiple tubing lines.
Construction Equipment and Supplies

Static Bulkhead Connectors connect multiple tubing lines.

Designed to connect tubing lines in control panel or machine, Static Bulkhead Connectors feature 1-piece design, with Â-¼ and 5/32 push-in connectors or ¼-28 UNF threads, that accommodates 4-12 tubing lines. Port numbers are etched into both sides of unit to simplify installation and identification. Black anodized for corrosion and wear resistance, device includes Buna-N o-ring to...

Read More »
Solenoid/Air Pilot Operated Valves feature 1/8 NPT ports.
Fluid & Gas Flow Equipment

Solenoid/Air Pilot Operated Valves feature 1/8 NPT ports.

Available in 3-way and 4-way configurations with 1/8 NPT (F) ports, 22 Series Valves provide flow rate of 40 scfm at 125 psi and feature single or double air pilot and solenoid operators. Rated at 1 W, 15 mm solenoid valves offer variety of connector and voltage options, while 4-way valves include 3-position version with closed or exhaust centers. Machined via PneuTef(TM) process allows valves to...

Read More »
Valves work with lubricated and non-lubricated air.
Fluid & Gas Flow Equipment

Valves work with lubricated and non-lubricated air.

Available in 3-way and 4-way configurations with 1/8 NPT ports, 22 Series provides flow rate of 40 scfm at 125 psi and features single or double air pilot and solenoid operators. Four-way models include 3-position version with either closed or exhaust centers, and 1 W, 15 mm solenoid valves offer variety of connector and voltage options. Special seal material accommodates low temperature...

Read More »
Company News

Pneumadyne Releases New Catalog on CD

Pneumadyne's new Portfolio is a comprehensive guide presenting our manufacturing and design capabilities, product offering and new Catalog on CD. Request your free copy for detailed information pertaining to pneumatic control valves, solenoid valves, fittings, manifolds, custom products, tubing and more.

Read More »
Fluid & Gas Flow Equipment

Latching Solenoid Valves suit low-power applications.

Suited for applications that require low power consumption, 10 and 15 mm Latching Solenoid Valves do not need continuous power to maintain position. Response times allow momentary pulse to activate and de-activate valves. Direct-acting, 2- and 3-way valves have operating pressure of vacuum to 150 psi. Single to 12-station manifolds are available with 10-32 (F) or M5 (F) threads, and 12 and 24 Vdc...

Read More »
Fittings offer single-barb design.
Fluid & Gas Flow Equipment

Fittings offer single-barb design.

Pneu-Edge(TM) fittings feature sharp, single-barb design that provides tight grip and seal. Precision machined barbs ensure permanent tubing installation without need for clamps. Straight connectors, tees, elbows, crosses, and couplings are available to accommodate various fluid handling circuits.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers