The French Oil Mill Machinery, Inc.

New Multi-Opening 600 Ton Hydraulic Press Comes with Color Touchscreen Operator Interface
Machinery & Machining Tools

New Multi-Opening 600 Ton Hydraulic Press Comes with Color Touchscreen Operator Interface

Features eight openings for compression molding of multiple rubber products each cycle, increasing production rates. Offers large heated press platens, each 48 x 54 inches that are drilled and welded to create a serpentine pattern for steam circulation. Consists of self-contained oil hydraulic unit with a steel constructed reservoir with hydraulic pump combination driven by an energy efficient...

Read More »
Latest Three Press Hydraulic System is Offered with One Central Press Controller
Machinery & Machining Tools

Latest Three Press Hydraulic System is Offered with One Central Press Controller

The Three Press Hydraulic System features nine pressing surfaces that increases the production rates. The system’s each press provides a pressing capacity of 10 tons and is offered with 6 in. square solid steel plate pressing surfaces. The pressing surface comes with one heat and cool zone per platen and independent set points on each lower and upper platen. The press controller consists of...

Read More »
Machinery & Machining Tools

Hydraulic Presses support lamination applications.

Integrating hydraulic power unit, electronic control package, and point-of-operation guarding, 100-ton Vision Series is available with optional lamination package. Electrically heated platens, yielding temperature uniformity to 480°F, are designed for cooling via multiple passages for water circulation and deliver typical temperature uniformity of ±5°F over 95% of surface area....

Read More »
Machinery & Machining Tools

Custom French® Automatic Hydraulic Press Design Increases Customer's Production

Piqua, Ohio - Several years ago, Utex Industries, Inc. in Weimar, Texas approached French® with their need for a new integrated hydraulic press system to mold composite and rubber seals for the oil and gas industry. The system needed to allow flexibility in their existing process, increase production and also be adaptable to future business needs. John Parker, Plant Engineer at Utex recalls...

Read More »
Machinery & Machining Tools

French® Hydraulic Presses: Superior Value, Superior Service

Piqua, Ohio - For nearly a century The Timken Company, based in Canton, Ohio, has been a customer of The French Oil Mill Machinery Company. While Timken continually updates their technology and procedures within their steel operations, their company still relies on one of their oldest machines, a 68-year-old, 500-ton French® straightening press. According to Larry Marks, Steel Processing...

Read More »
New Multi-Opening 600 Ton Hydraulic Press Comes with Color Touchscreen Operator Interface
Machinery & Machining Tools

New Multi-Opening 600 Ton Hydraulic Press Comes with Color Touchscreen Operator Interface

Features eight openings for compression molding of multiple rubber products each cycle, increasing production rates. Offers large heated press platens, each 48 x 54 inches that are drilled and welded to create a serpentine pattern for steam circulation. Consists of self-contained oil hydraulic unit with a steel constructed reservoir with hydraulic pump combination driven by an energy efficient...

Read More »
Company News

French Oil Mill Machinery Company Partners with New Oilseed Representative Company Vtech Dış Ticaret ve Temsilcilik A.Ş.

French Oil Mill Machinery Company, a US-based custom manufacturer of oilseed preparation and extraction equipment, announces a new representative partnership with Vtech, allowing the company to increase service to oilseed processing customers in select Eurasian and Middle Eastern countries. PIQUA, OHIO (PRWEB) DECEMBER 10, 2018 - French Oil Mill Machinery Company announces a new representative...

Read More »
Latest Three Press Hydraulic System is Offered with One Central Press Controller
Machinery & Machining Tools

Latest Three Press Hydraulic System is Offered with One Central Press Controller

The Three Press Hydraulic System features nine pressing surfaces that increases the production rates. The system’s each press provides a pressing capacity of 10 tons and is offered with 6 in. square solid steel plate pressing surfaces. The pressing surface comes with one heat and cool zone per platen and independent set points on each lower and upper platen. The press controller consists of...

Read More »
Machinery & Machining Tools

Hydraulic Presses support lamination applications.

Integrating hydraulic power unit, electronic control package, and point-of-operation guarding, 100-ton Vision Series is available with optional lamination package. Electrically heated platens, yielding temperature uniformity to 480°F, are designed for cooling via multiple passages for water circulation and deliver typical temperature uniformity of ±5°F over 95% of surface area....

Read More »
Machinery & Machining Tools

Custom French® Automatic Hydraulic Press Design Increases Customer's Production

Piqua, Ohio - Several years ago, Utex Industries, Inc. in Weimar, Texas approached French® with their need for a new integrated hydraulic press system to mold composite and rubber seals for the oil and gas industry. The system needed to allow flexibility in their existing process, increase production and also be adaptable to future business needs. John Parker, Plant Engineer at Utex recalls...

Read More »
Company News

French® Announces New French & TMP Sales Structure; TMP Name Change

Piqua, Ohio (March 15, 2011) - The French Oil Mill Machinery Company announced today a new sales structure for its hydraulic press groups, including the name change of TMP to TMP Inc., A Division of French to clarify their ownership structure. This reorganization, effective March 15, simplifies how the companies take their products to market, moving from brand-specific sales teams to consolidated...

Read More »
Machinery & Machining Tools

French® Hydraulic Presses: Superior Value, Superior Service

Piqua, Ohio - For nearly a century The Timken Company, based in Canton, Ohio, has been a customer of The French Oil Mill Machinery Company. While Timken continually updates their technology and procedures within their steel operations, their company still relies on one of their oldest machines, a 68-year-old, 500-ton French® straightening press. According to Larry Marks, Steel Processing...

Read More »
People in the News

French Oil Mill Machinery Company Elects New Director

Piqua, Ohio (February 26, 2010) - The stockholders of the French Oil Mill Machinery Company, a manufacturer of hydraulic presses, oilseed and polymer equipment, elected Dane A. Belden to serve on their board of directors, at their annual stockholders' meeting. This addition increases the number of French Oil directors to eight. Chairman of the Board and President Daniel P. French stated, We are...

Read More »
People in the News

Fourth Generation Joins French Oil Mill Machinery Company

Piqua, Ohio (February 17, 2010) - French Oil Mill Machinery Company recently appointed Taylor Tayte" French Lutz as Marketing Coordinator. Lutz will be responsible for market analysis, brand management, and all marketing campaigns at French Oil. She is the fourth generation of the French family to be employed by FOMMCO. Lutz comes to French Oil with eight years of experience in marketing,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers