Company News

Walter USA, Inc.

N22 W23855 RidgeView Parkway West, Waukesha, WI, 53188, USA

  • 800-945-5554

Latest New Product News from
Walter USA, Inc.

Machinery & Machining Tools

Solid Carbide Drill addresses small lot production needs.

Jan 08, 2015

Available in 0.12–0.63 in. diameters for everyday machining applications involving older machines, small quantities, or frequent workpiece changes, DC150 can be universally used for all materials and in all industries (especially general machining). Respectively featuring external and internal cooling, 3xD and 5xD variants are both available in cylindrical shank (DIN 6535 HA) or Whistle... Read More

Machinery & Machining Tools

Solid Carbide Thread Mills help boost productivity.

Dec 23, 2014

With thread depths of 1.5 x D and 2 x D, respectively, Walter Prototyp Supreme TC610 and TC611 offer geometry that minimizes vibration while producing optimal surface finishes, and through coolant design that maximizes chip removal and helps prevent fractures. WB10RD grade, providing optimized wear resistance, features TiALN coating with finishing layer of ZrN. WJ30RC grade, with TiALN coating,... Read More

Machinery & Machining Tools

Grooving/Parting Tools extend life expectancy via wear resistance.

Nov 21, 2014

Constructed with wear-resistant cutting material, Walter Cut GX Tiger•tec Silver® CVD grooving and parting grades WKP13S, WKP23S, and WKP33S optimize metal removal rates while maintaining or improving tool life. Tiger-tec Silver CVD coating features aluminum oxide with optimized microstructure for max crater wear resistance and cutting speed, while silver flank face aids wear detection and... Read More

Fasteners & Hardware

Indexable Inserts feature positive geometry.

Oct 29, 2014

Featuring positive cutting edge design, FP4, MP4, and RP4 are available with WPP10S, WPP20S, and WPP30S Tiger•tec Silver® cutting grades. FP4 is optimized for finishing, while MP4, available with two clearance angles of 7° and 11°, is intended for mid-range machining of materials such as structural steel or other low-carbon steels. Both have been optimized for short chip breaking. Offering... Read More

Machinery & Machining Tools

Single-Edged Grooving System cuts deeper than insert length.

Oct 15, 2014

With cutting depth of grooves not limited to length of insert, Walter Cut-SX enables deep grooving and parting cuts required in many industry sectors. Process reliability is enhanced by self-clamping inserts and made possible by precisely matched grooving inserts and insert holders, positive locking insert shape with form fit underside, and sturdy top clamp. With and without high pressure,... Read More

Machinery & Machining Tools

Universal Milling System reduces tooling requirements.

Sep 30, 2014

Able to be used with all steel and cast iron materials, stainless steels, and difficult-to-cut materials, M4000 comprises 3 cutter bodies and 4 indexable inserts and can be employed in such applications as face milling, shoulder milling, and chamfering. Flank faces on 4 cutting edges of inserts feature wave profile that displays geometry. Coated with Tiger•tec Silver®, inserts have rake face... Read More

Machinery & Machining Tools, Portable Tools

Solid Carbide Milling Cutters reduce micro fracturing.

Sep 19, 2014

Designed for stability and to minimize likelihood of micro fracturing, Walter Prototyp Supreme MB265/MB266 feature coolant strategy without radial exits, V-cutting edges that increase ramping angle, and one cutting edge to center. Engineered primarily for use with ISO N material group, these milling tools come in WJ30UU (uncoated) grade; Supreme MB265 is also available in WJ30CA (CrN coated)... Read More

Machinery & Machining Tools

Solid Carbide Drills deliver performance, stability, reliability.

Sep 11, 2014

Supplied in 16xD and 20xD sizes and suited for use on ISO-P and ISO-K materials, DC170 internally cooled drill features land design that orients margins radially and copper-color finish (DPP Coating). Lands have shallow cooling grooves at drill end, and 8 visible cooling grooves can be used as scale for regrinding. Coolant flow encompasses entire drill point, optimizing cooling while also... Read More


Rapid Design Service provides drilling and boring inserts.

Aug 01, 2014

With Walter Xpress rapid design and delivery service, user tells Walter their machining requirement. Experts then enter customer-specific parameters into configuration system. For drilling and boring tools, variable parameters include diameter, max number of 3 steps, step lengths, and chamfer angles. System designs required tool and outputs documentation, including 3D model. Customer receives... Read More

Machinery & Machining Tools, Portable Tools

Counterboring, Precision Boring Tools use Capto technology.

Jul 02, 2014

Counterboring and precision boring tools are available with connections for Walter Capto™ adaptors, which allow multiple processes to be performed with single tooling interface. Allowing use on small and large machines, connections are available in 5 coupling sizes. Capto variants feature completely backlash-free, self-centering connection that does not require special locking device.... Read More

Machinery & Machining Tools

Slitting Cutter delivers process reliability at high speeds.

Jun 03, 2014

Available in diameters from 63–250 mm for insert widths of 2.0–4.0 mm, Blaxx™ F5055 is suitable for cast-iron, steel, and stainless steel components. Optimized concentric and axial run-out values of cutter body keep vibration to minimum. Tiger·tec® Silver cutting tool material is available in 2 grades and 3 insert geometries. CE4 geometry is suited for medium-high feed rates, while... Read More

Machinery & Machining Tools

Solid Carbide Deep-Hole Drills reach depth of 50 x diameter.

May 07, 2014

With respective drill depths of 40xD and 50xD, Walter Titex X•treme D40 and D50 employ XD (extremely deep) technology which enables holes to be drilled in one operation, without pecking, in steel, cast iron, or non-ferrous metals. TiALN-tip coating promote service life, and other features include internal coolant channels for optimum heat dissipation and reliable chip evacuation. Latter is also... Read More

Machinery & Machining Tools, Portable Tools

Through Hole Coolant Taps offer heightened wear resistance.

Apr 16, 2014

Available in 3 versions that are suitable for large batch sizes and mass production, Prototex® HP-P Series is targeted at steel applications from 600-1250 N/mm².  Prototex HP-P (1) has HSS-E-PM substrate and TiCN coating and is particularly effective in unstable conditions. HP-P (2), featuring HSS-E substrate with TiCNX coating, delivers high tool life under normal conditions. With HSS-E-PM... Read More

Fasteners & Hardware

Round Insert suits medium- to heavy-duty roughing operations.

Mar 26, 2014

Specifically designed for roughing solid railroad wheels and other forged parts, Tiger•tec® Silver HU6 Indexable Insert has coating that maximizes cutting speed and tool life. Insert's geometry features specially formed chip dimples for optimal chip formation, facilitating chip breaking in required area. Available in diameters from 10–32 mm, insert comes in 3 grades for steel and one for... Read More

Machinery & Machining Tools

Solid Carbide Endmill combines performance, extended tool life.

Mar 07, 2014

Used on steel, stainless steel, cast iron, and super alloys, Prototyp Proto•max™TG (Tough Guys) is available in 2–25 mm dia variants with 3, 4, or 5 cutting edges. Design promotes chip removal, rear cutting edge has reinforced core to promote stability, and carbide substrate provides toughness for counteracting vibration induced fractures to cutting edge. Pre-treatment provides optimum... Read More

Machinery & Machining Tools

Micro Drills enable drilling without pecking.

Feb 19, 2014

Available in 16 x D and 30 x D drilling depths with diameters from 2-2.95 mm, Titex X•treme DM Micro Drills are suitable for drilling holes for lubrication, cooling, venting, and nozzle bores in automotive, aerospace, die and mold, and general metalworking industries. Units feature internal cooling, as well as optimized point geometry with special cutting edge preparation and precisely... Read More

Fasteners & Hardware, Machinery & Machining Tools

Grooving and Parting System employs positive locking inserts.

Feb 10, 2014

Featuring self-clamping, single edge grooving inserts with positive-locking integration in tool insert seat, Walter Cut SX System optimizes both turning and milling operations. Positive locking keeps inserts secure and accurately seated when subjected to heavy load in feed direction. Available in widths from 2.0–6.0 mm, grooving inserts come in Tiger•tec® Silver PVD cutting material grades... Read More

Machinery & Machining Tools, Portable Tools

Insert Geometries target parting and grooving operations.

Jan 29, 2014

With its cutting edge toughness and chip compression characteristics, CE4 geometry accommodates medium to high feed rates. Universal CF5 geometry is suited for long-chipping materials and medium feed rates, while CF6 geometry is intended for applications with low feed rates, non-ferrous metals, small diameters, or thin-walled tubes. All geometries have Tiger•tec® Silver CVD coating... Read More

Fasteners & Hardware, Machinery & Machining Tools, Portable Tools

Cutting Inserts comes in geometries for cast iron machining.

Jan 16, 2014

Intended for machining ISO K (cast iron) materials, Tiger•tec® Silver® RK5 and RK7 geometries have CVD coating and plateau step. Latter enables location face to be ground after coating. Evenly ground faces ensure seating with optimal stability, which minimizes cutting edge wear and promotes tool life and process reliability. While RK5 flat top insert suits cast iron roughing operations, RK7... Read More

Machinery & Machining Tools, Portable Tools

Through-Hole Tap is optimized for performance, life expectancy.

Nov 26, 2013

Designed for through-hole threads up to 3.5xD, Prototyp Prototex® Eco Plus is manufactured from HSS-E-PM and can be used on steel, stainless steel, and cast iron as well as such non-ferrous metals as aluminum and copper. Pre-treatment optimizes adhesion of THL hard material coating, increasing performance and tool life, while optimized geometry in chamfer section increases process reliability.... Read More