Sterlitech Corp.
Kent, WA 98032-1911
MF Series Magnetic Filter Holders can withstand autoclaving.
MF Series Magnetic Filter Holders are constructed from Polyethersulfone (PES) material. Units feature built-in membrane guide and bevel designs for easy position and retrieval of filters. Holders use magnetic coupling between funnel and base that allows single handed operation. Units are suitable for volume measurement of both 300 ml and 500 ml funnels graduated in 50 mL increments in range of...
Read More »
Glass Vacuum Filtration System comes with 2L funnel.
Glass Vacuum Filtration System is equipped with PTFE coated stainless steel support screen, and 10L PVC-coated vacuum receiving flask. Unit is suitable for cold filtration applications and offers ground glass joints. Product provides GL14 connections and can accommodate membrane filters of 150 mm diameter. Filtration system is used for rough debris removal and bacterial filtration.
Read More »
Hydrophobic PETE Membrane Vent Filters are suitable for electrical enclosures.
Hydrophobic Polyester Track-Etch Membrane Vent Filters are available in 0.2, 0.4, 1.0, and 1.2µm pore size ratings. Units feature nonwoven polyester support layer and pressure activated adhesives. Products are suitable for passage of air and gases and help to prevent passage of liquid water, particles and microorganisms. Filters offer surface tension >25dynes/cm.
Read More »
No-Boo!-To Test Strips
Nobuto Blood Filter Strips are the bloodiest product in Sterlitech?s catalog; get some in time for Halloween sample testing! Made from high-purity cellulose fibers, these strips are structured for uniform sampling. Each strip holds approximately 0.1 mL of blood or 0.04 mL of serum. Once blood is applied and the strip has dried, researchers can analyze, store, or mail the samples without...
Read More »
Sterlitech to Provide Larger Scale Membrane Skids for Research and Industry Customers
These pilot skid systems are specifically designed for pilot testing of spiral wound membrane filters or small scale filtration processes. They offer more than 200 times the filtration surface available in standard bench-top filtration systems, allowing users to increase throughput and obtain results that translate for scale-up. Digital skids enable hands-free monitoring of process parameters and...
Read More »
Dyed Polycarbonate Membrane Filters are suitable for optical microscopy studies.
Hydrophilic, polycarbonate track-etch (PCTE) membrane filters are pigmented using black dye to reduce membrane autofluorescence. Units are suitable for fluorescence microscopy analyses. Products are available in gray and black versions. Membrane Filters are ideal for automated fluorescence microscopy.
Read More »
Hollow Fiber Membrane Modules are made from polycarbonate material.
AQP HFFO2 Hollow Fiber Membrane Modules are coated with an Aquaporin Inside™ on the lumen side of fiber. Units feature wall thickness of 35µm and inner diameter of 195µm. Products come with membrane active area of 2.3 m². Modules come in dimensions of 300mm long and 70mm in diameter and are suitable for zero or minimal liquid discharge applications. AQP HFFO2 is used for pre-treatment of...
Read More »Sterlitech's Membrane Flat Sheets comes with 5nm pore size rating.
Sterlitech’s Membrane is made from polyether ether ketone material. Unit is available in 25 mm disks, 47 mm disks and 10x10 cm coupon. Product is chemical resistant and is offered in CF016, CF042, and Sepa cuts. Membrane is suitable for dialyzing monomers and polymers in solvents, degassing of harsh chemicals and battery separators and semiconductor applications.
Read More »
Benchtop Vacuum Kit is offered in 110V and 220V options.
Rocker-VF12 Benchtop Vacuum Kit is used for purification of organic or corrosive liquids such as mobile phase solvents. Unit consists of PTFE-coated Rocker 300C pump, silicone vacuum tubing and a 300 mL capacity glass filter funnel. Product can be connected directly to a GL45 waste bottle.
Read More »
Kato-Katz Analysis Technique for Soil-Transmitted Helminthiasis (STH)
In last October's newsletter, Sterlitech announced the availability of kits for performing the Kato-Katz analysis technique for Soil-Transmitted Helminthiasis (STH) in field-based applications, signifying the first time that these kits were available from a source in the United States. Prior to this, the efforts of research groups and health organizations could be hampered by limited...
Read More »
MF Series Magnetic Filter Holders can withstand autoclaving.
MF Series Magnetic Filter Holders are constructed from Polyethersulfone (PES) material. Units feature built-in membrane guide and bevel designs for easy position and retrieval of filters. Holders use magnetic coupling between funnel and base that allows single handed operation. Units are suitable for volume measurement of both 300 ml and 500 ml funnels graduated in 50 mL increments in range of...
Read More »Sterlitech Corporation is Awarded ISO 9001:2015 Certification
Company Celebrates Official Commitment to Continuous Improvement KENT, WASH. - DECEMBER 07, 2017 - Sterlitech, a manufacture of filtration products, is pleased to announce it has obtained ISO 9001:2015 quality certification with Perry Johnson Registrars, Inc. Its award indicates that Sterlitech’s quality management system is designed to increase productivity, streamline processes, and ensure...
Read More »Oysters Act as a Natural Seawater Filtration System
Environmental educators in Pensacola are acquainting kids with water filtration in a new, hands-on way. Instead of a class turtle, these students are raising baby oysters. This program is sponsored by the Pensacola Bay Oyster Company and supports a local nonprofit, the Bream Fisherman Association, in its efforts to educate a new generation on marine wildlife preservation. Students contribute to...
Read More »
Glass Vacuum Filtration System comes with 2L funnel.
Glass Vacuum Filtration System is equipped with PTFE coated stainless steel support screen, and 10L PVC-coated vacuum receiving flask. Unit is suitable for cold filtration applications and offers ground glass joints. Product provides GL14 connections and can accommodate membrane filters of 150 mm diameter. Filtration system is used for rough debris removal and bacterial filtration.
Read More »
Hydrophobic PETE Membrane Vent Filters are suitable for electrical enclosures.
Hydrophobic Polyester Track-Etch Membrane Vent Filters are available in 0.2, 0.4, 1.0, and 1.2µm pore size ratings. Units feature nonwoven polyester support layer and pressure activated adhesives. Products are suitable for passage of air and gases and help to prevent passage of liquid water, particles and microorganisms. Filters offer surface tension >25dynes/cm.
Read More »
No-Boo!-To Test Strips
Nobuto Blood Filter Strips are the bloodiest product in Sterlitech?s catalog; get some in time for Halloween sample testing! Made from high-purity cellulose fibers, these strips are structured for uniform sampling. Each strip holds approximately 0.1 mL of blood or 0.04 mL of serum. Once blood is applied and the strip has dried, researchers can analyze, store, or mail the samples without...
Read More »
Sterlitech to Provide Larger Scale Membrane Skids for Research and Industry Customers
These pilot skid systems are specifically designed for pilot testing of spiral wound membrane filters or small scale filtration processes. They offer more than 200 times the filtration surface available in standard bench-top filtration systems, allowing users to increase throughput and obtain results that translate for scale-up. Digital skids enable hands-free monitoring of process parameters and...
Read More »King Cannabis Expo Recap
Spokane county is home to the largest concentration of cannabis farms in Washington State, so we were excited to visit the source and attend the King Cannabis Conference & Expo in Spokane, WA. Representatives from Sterlitech connected with producers and processors from across the state to gain insight into current and emerging trends in the industry. At the expo, Sterlitech displayed its newest...
Read More »Why Evaluate Hydraulic Fluid Compatibility?
When introducing a new control fluid to hydraulic systems, it is important to ensure that the new liquid or mixture is of equal or superior quality to the previous fluid. If the new mixture is incompatible, precipitate may form and result in an overall inferior fluid. This can speed up clogging or damage the system. When a manufacturer of construction machinery releases a new line of bulldozers...
Read More »
Dyed Polycarbonate Membrane Filters are suitable for optical microscopy studies.
Hydrophilic, polycarbonate track-etch (PCTE) membrane filters are pigmented using black dye to reduce membrane autofluorescence. Units are suitable for fluorescence microscopy analyses. Products are available in gray and black versions. Membrane Filters are ideal for automated fluorescence microscopy.
Read More »