Asset InterTech Inc.
Richardson, TX 75080

Latest ScanWorks JTAG-Based Platform Shortens Time to Program Flash Memories
Features processor-based functional test/programming (PFx) tool that can perform fast programming routines, run functional tests on the devices and I/O buses on a circuit board. Can generate test patterns in Standard Test Interface Language (STIL) that can be applied by chip-level automatic test equipment (ATE) to test for shorts and opens between chiplets. Integration of ScanWorks FPGA-based...
Read More »ASSET SourcePoint Now Supports AMD EPYC Processors
Richardson, TX (November 19, 2019) – Source-level UEFI debug support for the second-generation AMD EPYC™ processors is now available on ASSET InterTech’s SourcePoint debuggers. This brings the SourcePoint debugger’s market-leading ease-of-use, performance, and familiar interface to all x86 firmware developers. ASSET is the leading supplier of JTAG-based software and hardware debug,...
Read More »
New ScanWorks Software from ASSET Comes with Reduced Software Image Load Time
Can decrease programming times for SPI flash memory devices where inline programming will not disrupt the manufacturing beat rate. Offers FPGA-based Fast Flash Programming (FFP) tool that include IGLOO2, PolarFire FPGAs and the SmartFusion2 FPGA/SoCs. Features inventories of pre-programmed flash memories that can be eliminated and last-minute changes can be made to the programming data.
Read More »
New RIC-1400 Ethernet Controller Comes with USB 3.0 Interface
Can connect directly to a UUT and to a computer running ScanWorks via the computer’s Ethernet port. Able to run boundary-scan tests and program devices on the Unit Under Test via an Ethernet connection. Increased internal memory to 4GB and TCK frequency up to 80 MHz.
Read More »
DDR4 Memory on Prototypes and Production PCBs Can Be Quickly Tested with ASSET InterTech's ScanWorks
- Without probes or bed-of-nails fixtures, ScanWorks Memory Access Verify (MAV) and Component action for DDR4’s Connectivity Test (CT) can pinpoint shorts and opens on DDR4 device interconnects - Downloadable DDR4 device models enable fast deployment of MAV test actions - For even greater fault coverage, processor-based tests provide the added value of at-speed functional testing with...
Read More »
Latest ScanWorks Platform Automates Functional Tests at Processor Speeds
The ScanWorks® Platform is now embedded with processor-based functional test for DDR, fast programming and functional test tools. The PFTDDR tool is used for automating functional testing of DDR memories that are connected to Arm cortex cores on a i.MX 6 processor. The PFP tool embeds temporary fast programming engine in the on-chip RAM that enables flash memory to be loaded with system and...
Read More »Processor-Controlled Test Tool performs test without booting.
ScanWorks™ PCT can perform structural and functional test, as well as diagnostics, in one pass and still achieve high test speeds required on manufacturing lines. Fast test execution speeds allow memories to be tested down to bit level on Intel Core™-based platforms and to rank level on Xeon-® circuit boards without disrupting flow of manufacturing line. In addition, PCT tool can test...
Read More »ASSET and Cadence IJTAG Interoperability Ensures IP Re-use for Advanced SoC and System Diagnostics
Product demos at International Test Conference show growth of ecosystem for IJTAG embedded instrumentation standard Anaheim, CA, – International Test Conference, Booth 110- – At the International Test Conference (ITC) here this week, ASSET-® InterTech (www.asset-intertech.com), a leading supplier of software and hardware debug, validation and test tools, and Cadence Design Systems Inc....
Read More »ASSET and Cadence IJTAG Interoperability Ensures IP Re-UIse for Advanced SoC and System Diagnostics
Product demos at International Test Conference show growth of ecosystem for IJTAG embedded instrumentation standard Anaheim, CA, International Test Conference Booth 110 — At the International Test Conference (ITC) here this week, ASSET-® InterTech (www.asset-intertech.com), a leading supplier of software and hardware debug, validation and test tools, and Cadence Design Systems Inc....
Read More »
In-System Flash Memory Programmer offers 1-2 sec cycle times.
Available for design and manufacturing engineers, ScanWorks-® can reduce programming times from 10 or more minutes to 1 or 2 sec. FPGA-Controlled Test (FCT) tool inserts board tester with multiple instruments into functional FPGA, and high-speed programming engines, which utilize IEEE 1149.1 JTAG port on FPGAs, can load memories connected to FPGA. Solution can program diverse types of Flash...
Read More »ASSET InterTech's ISO 9000 Certification Ensures Quality of ScanWorks and SourcePoint Platforms
Year-long certification process demonstrates commitment to quality products and service Richardson, TX (July 7, 2020) – Culminating a year-long review of its quality management standards and an intense three-day audit of its processes, ASSET® InterTech has been awarded an ISO-9001 certificate by the International Standards Organization, a global body comprised of 164 national standards...
Read More »
Latest ScanWorks JTAG-Based Platform Shortens Time to Program Flash Memories
Features processor-based functional test/programming (PFx) tool that can perform fast programming routines, run functional tests on the devices and I/O buses on a circuit board. Can generate test patterns in Standard Test Interface Language (STIL) that can be applied by chip-level automatic test equipment (ATE) to test for shorts and opens between chiplets. Integration of ScanWorks FPGA-based...
Read More »ASSET SourcePoint Now Supports AMD EPYC Processors
Richardson, TX (November 19, 2019) – Source-level UEFI debug support for the second-generation AMD EPYC™ processors is now available on ASSET InterTech’s SourcePoint debuggers. This brings the SourcePoint debugger’s market-leading ease-of-use, performance, and familiar interface to all x86 firmware developers. ASSET is the leading supplier of JTAG-based software and hardware debug,...
Read More »
New ScanWorks Software from ASSET Comes with Reduced Software Image Load Time
Can decrease programming times for SPI flash memory devices where inline programming will not disrupt the manufacturing beat rate. Offers FPGA-based Fast Flash Programming (FFP) tool that include IGLOO2, PolarFire FPGAs and the SmartFusion2 FPGA/SoCs. Features inventories of pre-programmed flash memories that can be eliminated and last-minute changes can be made to the programming data.
Read More »Silicon Review Names ASSET InterTech One of 50 Most Trustworthy Technology Companies for 2019
Richardson, TX (Sept. 17, 2019) – “Being named by Silicon Review Magazine as one of the 50 Most Trustworthy Companies for 2019 really highlights what ASSET® InterTech has been about for the last 24 years – delivering extreme value to our users across the globe,” said Glenn Woppman, president and CEO of ASSET, a leading supplier of JTAG-based software and hardware debug, validation and...
Read More »
New RIC-1400 Ethernet Controller Comes with USB 3.0 Interface
Can connect directly to a UUT and to a computer running ScanWorks via the computer’s Ethernet port. Able to run boundary-scan tests and program devices on the Unit Under Test via an Ethernet connection. Increased internal memory to 4GB and TCK frequency up to 80 MHz.
Read More »
DDR4 Memory on Prototypes and Production PCBs Can Be Quickly Tested with ASSET InterTech's ScanWorks
- Without probes or bed-of-nails fixtures, ScanWorks Memory Access Verify (MAV) and Component action for DDR4’s Connectivity Test (CT) can pinpoint shorts and opens on DDR4 device interconnects - Downloadable DDR4 device models enable fast deployment of MAV test actions - For even greater fault coverage, processor-based tests provide the added value of at-speed functional testing with...
Read More »
Latest ScanWorks Platform Automates Functional Tests at Processor Speeds
The ScanWorks® Platform is now embedded with processor-based functional test for DDR, fast programming and functional test tools. The PFTDDR tool is used for automating functional testing of DDR memories that are connected to Arm cortex cores on a i.MX 6 processor. The PFP tool embeds temporary fast programming engine in the on-chip RAM that enables flash memory to be loaded with system and...
Read More »Processor-Controlled Test Tool performs test without booting.
ScanWorks™ PCT can perform structural and functional test, as well as diagnostics, in one pass and still achieve high test speeds required on manufacturing lines. Fast test execution speeds allow memories to be tested down to bit level on Intel Core™-based platforms and to rank level on Xeon-® circuit boards without disrupting flow of manufacturing line. In addition, PCT tool can test...
Read More »New eBook Explains the Embedded IP Capabilities of IEEE 1687 IJTAG Not Found in IEEE 1149.1 JTAG
A new eBook from ASSET-® InterTech explains how a relatively new industry standard, IEEE 1687 Internal JTAG (IJTAG), provides critical capabilities not found in older standards, such as the IEEE 1149.1 boundary-scan standard, commonly referred to as JTAG, and the IEEE 1500 embedded core test (ECT) standard. The new eBook shows that IJTAG enables the easy integration of intellectual property (IP)...
Read More »