MEGA Electronics, Inc.

C-13 Multi-Tier Outlets come with nylon LSZH body.
Construction Equipment and Supplies

C-13 Multi-Tier Outlets come with nylon LSZH body.

Presented in two versions - 12mm for 4 tier, and 21mm for 6 tier, C-13 Multi-Tier Outlets use unique locking mechanisms to maintain uptime and defend against accidental disconnections. With 10A rating for Europe and 15A rating UL for the USA, each outlet offer independent-release locking mechanism along with release buttons. Easy to install, unit requires comparatively less space than four or six...

Read More »
DC/DC Converters for Medical Equipment
Electrical Equipment & Systems

DC/DC Converters for Medical Equipment

MEGA M1WG(H) and M2WG(H) series of 1W and 2W DC/DC converters are designed to provide a 6kV isolation barrier between input and output circuits, making them ideal for all medical and dental instruments that come into patient contact. The converters are tested for 1 minute which equates to a rating of 7.5kV if tested at 1 second, which is the lesser and more common test standard. Some models carry...

Read More »
Electrical Equipment & Systems

M1WG(H)_S Series, Fixed Input, 6000 V Isolated & Unregulated Dual/Single Output DC-DC Converter

Features 6KVDC Isolation SIP Package Temperature Range: -40°C to +85°C No Heat Sink Required Low Isolation Capacitance Internal SMD Construction Industry Standard Pinout RoHS Compliance APPLICATIONS The M1WG(H)_S Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a...

Read More »
Electrical Equipment & Systems

DC/DC Converters (1 W) are built for reliability.

Offering MTBF of 3.5 million hr, M1WB series feature 1 kVdc of isolation and fixed input with unregulated outputs. They come in SIP, DIP, and SMD packages with industry standard pinouts and operate over -40 to +85°C range. Delivering efficiencies up to 81%, RoHS-compliant products do not require any heat sink or external components. They are designed for applications where single power...

Read More »
Powercord features BSMI approval for use in Taiwan.
Electrical Equipment & Systems

Powercord features BSMI approval for use in Taiwan.

Rated 10 A/125 V, Model 1940000003 features certification by Bureau of Standards, Metrology, and Inspection of the Ministry of Economic Affairs in Taiwan. Detachable cordset has N5/15 and C13 connector as well as 1,677 mm of VCTF3 x 1.25 mm cable. Incorporating BSMI-approved cordset into equipment accelerates approval process and grants quicker access to Taiwanese market for all electric and...

Read More »
Electrical Equipment & Systems

DC/DC Converter features 4:1 input.

Featuring half-brick footprint, 75 W Series PD75W offers efficiencies to 90% with 15 A of output current. Six-sided, continuous shielded unit includes remote On/Off, input reverse protection, 2,250 Vdc input-to-output isolation, and adjustable output voltage. Optional terminal block allows converter to be used without PC board mounting, making it suited for industrial control systems and...

Read More »
Switching Regulators offer efficiencies up to 96%.
Controls & Controllers

Switching Regulators offer efficiencies up to 96%.

Pin-compatible 0.5 and 1.0 A M78 switching regulators are recommended for use as stable sources of dc output voltage from wide input dc range such as from batteries. They include thermal shutdown, short circuit protection with continuous automatic recovery, and low ripple and noise. Fully encapsulated regulators have normal operating temperatures from -40 to +85°C ambient and +100°C...

Read More »
DC/DC Converters offer up to 10 kV isolation.
Electrical Equipment & Systems

DC/DC Converters offer up to 10 kV isolation.

Providing isolation barriers for medical applications with patient contact, M1WG/M1WH series (1 W) and M2WG/M2WH series (2 W) are available with 6 kV isolation voltage tested for 1 min. Parts are available with single and dual outputs and come in SIP or DIP packages; latter is UL-Listed. Able to achieve efficiencies to 85%, M1WY (1 W) and M2WY (2 W) converters offer 10 kV isolation voltages. All...

Read More »
AQV1 Molded Strain Relief
Electrical Equipment & Systems

AQV1 Molded Strain Relief

MEGA Electronics Inc. is please to announce the addition of the AQV1 molded strain relief to our line of powercord products. The AQV1 has a PG11 thread made of PVC and is available with or without a Nylon locking ring. Capable of handling from 5mm to 10mm cable, the AQV1 can be molded onto cables for both the domestic and international markets. Available in a variety of colors and with various...

Read More »
C-13 Multi-Tier Outlets come with nylon LSZH body.
Construction Equipment and Supplies

C-13 Multi-Tier Outlets come with nylon LSZH body.

Presented in two versions - 12mm for 4 tier, and 21mm for 6 tier, C-13 Multi-Tier Outlets use unique locking mechanisms to maintain uptime and defend against accidental disconnections. With 10A rating for Europe and 15A rating UL for the USA, each outlet offer independent-release locking mechanism along with release buttons. Easy to install, unit requires comparatively less space than four or six...

Read More »
Company News

New Cable Standard for Medical Beds in Europe

IEC 60601-2-52:2009 applies to the basic safety and essential performance of medical beds intended for adults. This first edition cancels and replaces the first edition of IEC 60601-2-38, published in 1996, and its Amendment 1 (1999). This edition constitutes a technical revision. IEC 60601-2-52:2009 is the realization of much work in alignment, and scope adjustment between IEC 60601-2-38, EN...

Read More »
DC/DC Converters for Medical Equipment
Electrical Equipment & Systems

DC/DC Converters for Medical Equipment

MEGA M1WG(H) and M2WG(H) series of 1W and 2W DC/DC converters are designed to provide a 6kV isolation barrier between input and output circuits, making them ideal for all medical and dental instruments that come into patient contact. The converters are tested for 1 minute which equates to a rating of 7.5kV if tested at 1 second, which is the lesser and more common test standard. Some models carry...

Read More »
Electrical Equipment & Systems

M1WG(H)_S Series, Fixed Input, 6000 V Isolated & Unregulated Dual/Single Output DC-DC Converter

Features 6KVDC Isolation SIP Package Temperature Range: -40°C to +85°C No Heat Sink Required Low Isolation Capacitance Internal SMD Construction Industry Standard Pinout RoHS Compliance APPLICATIONS The M1WG(H)_S Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a...

Read More »
Electrical Equipment & Systems

DC/DC Converters (1 W) are built for reliability.

Offering MTBF of 3.5 million hr, M1WB series feature 1 kVdc of isolation and fixed input with unregulated outputs. They come in SIP, DIP, and SMD packages with industry standard pinouts and operate over -40 to +85°C range. Delivering efficiencies up to 81%, RoHS-compliant products do not require any heat sink or external components. They are designed for applications where single power...

Read More »
Powercord features BSMI approval for use in Taiwan.
Electrical Equipment & Systems

Powercord features BSMI approval for use in Taiwan.

Rated 10 A/125 V, Model 1940000003 features certification by Bureau of Standards, Metrology, and Inspection of the Ministry of Economic Affairs in Taiwan. Detachable cordset has N5/15 and C13 connector as well as 1,677 mm of VCTF3 x 1.25 mm cable. Incorporating BSMI-approved cordset into equipment accelerates approval process and grants quicker access to Taiwanese market for all electric and...

Read More »
Electrical Equipment & Systems

DC/DC Converter features 4:1 input.

Featuring half-brick footprint, 75 W Series PD75W offers efficiencies to 90% with 15 A of output current. Six-sided, continuous shielded unit includes remote On/Off, input reverse protection, 2,250 Vdc input-to-output isolation, and adjustable output voltage. Optional terminal block allows converter to be used without PC board mounting, making it suited for industrial control systems and...

Read More »
Switching Regulators offer efficiencies up to 96%.
Controls & Controllers

Switching Regulators offer efficiencies up to 96%.

Pin-compatible 0.5 and 1.0 A M78 switching regulators are recommended for use as stable sources of dc output voltage from wide input dc range such as from batteries. They include thermal shutdown, short circuit protection with continuous automatic recovery, and low ripple and noise. Fully encapsulated regulators have normal operating temperatures from -40 to +85°C ambient and +100°C...

Read More »
DC/DC Converters offer up to 10 kV isolation.
Electrical Equipment & Systems

DC/DC Converters offer up to 10 kV isolation.

Providing isolation barriers for medical applications with patient contact, M1WG/M1WH series (1 W) and M2WG/M2WH series (2 W) are available with 6 kV isolation voltage tested for 1 min. Parts are available with single and dual outputs and come in SIP or DIP packages; latter is UL-Listed. Able to achieve efficiencies to 85%, M1WY (1 W) and M2WY (2 W) converters offer 10 kV isolation voltages. All...

Read More »

All Topics