Company News

Goodfellow Corp.

125 Hookstown Grade Road, Coraopolis, PA, 15108, USA

  • 800-821-2870

Latest New Product News from
Goodfellow Corp.

Materials & Material Processing

Goodfellow’s C-Solder Alloy offers melting point of 232˚C.

Oct 28, 2017

Goodfellow’s C-Solder Alloy is used for joining carbon materials such as carbon or carbon nanotube fibers in carbon-carbon arrangements and aluminum to aluminum. This lead-free unit offers density of 7.4 g/cm³ and is electrically and thermally conductive. This flux-free product is not flammable.

Read More

Fluid & Gas Flow Equipment, Materials & Material Processing

Ceramic Foam is available in different materials.

Dec 05, 2016

Featuring sizes up to 50mm x 600mm x 800mm, ceramic foam comes with 1350-1500 ˚C heat stability. Available in square, circle, rectangle as well as custom shape, unit allows two different porosities possible in one manufactured piece. Device comes with standard porosities ranging 3-30 pores/cm and is suitable for filtration in castings of cast iron, bronze, brass and copper alloys.

Read More

Materials & Material Processing, Paints & Coatings

CVD Graphene Films meet diverse application requirements.

May 19, 2016

Produced via chemical vapor deposition (CVD) methods, graphene film can be used as transparent conductors and in other applications. CVD graphene on copper foil has copper foil thickness of 0.035 mm, monolayer thickness from 2–3 nm, and film morphology with continuous monolayer >95%. While ultra-clean graphene on SiO2/Si Wafers transfer by PSA films, graphene on quartz glass... Read More

Materials & Material Processing

Silicon Nitride insulates high-power electronic devices.

Mar 14, 2016

With thermal conductivity of 100 W/mK, Silicon Nitride serves as insulating substrate for power modules, high-frequency circuits, and LED mounting. High fracture toughness makes material resistant to impact and shocks. Product can be polished to surface roughness of Ra=0.02 µm and is wear-resistant. Supplied standard in sheet form measuring 100 x 100 mm with thickness of 0.32 mm, Silicon... Read More

Materials & Material Processing

Microporous Copper Foam suits heat sink applications.

Apr 23, 2015

Featuring pore sizes from 300–600 µm and relative density of around 37%, Microporous Copper Foam is produced by means of lost carbonate sintering process. Rigid, highly porous, and permeable structure is regular and uniform throughout, and provides controlled density of metal per unit volume. Supplied in disks and sheet ranging in thickness from 4–10 mm, foam is suited for liquid cooling,... Read More

Non-Industrial Products

Gemstone Powders come from natural gemstones.

Aug 22, 2014

Available in quantities as small as 10 g, Gemstone Powders include emerald, moonstone, opal, peridot, topaz, and turquoise. Powders are made from natural, non synthetic gemstones. Due to fine size of particles, powders do not necessarily resemble gemstone. Dozens of other gemstone and mineral powders are available as special order.

Read More

Materials & Material Processing

Zinc Foams provide isotropic load response.

Mar 13, 2014

Available in standard pore size of 4 pores/cm, with bulk density from 0.17–0.33 g/cm³, Zinc Foams come in 2 variants: 99.99% zinc deposited on polyurethane foam and ZAMAK 410 Zn /Al4/Cu1/Mg0.04 zinc alloy foam with solid ligaments. Matrix of cells and ligaments is repeatable and uniform throughout material, yielding rigid, porous, and permeable structure with controlled density of metal/unit... Read More

Fluid & Gas Flow Equipment

Capillary Tubes suit scientific and industrial applications.

Oct 22, 2013

Suited for specialty applications, glass capillary tubes come in IDs as small as 0.005 mm and such materials as soda lime glass, borosilicate glass, quartz, and sapphire. All materials can be sterilized, are inert, and may be used for precision measuring. Tube shapes can be matched to application and include circular, rectangular, square, heavy wall, double bore, four bore,... Read More

Materials & Material Processing

Reproducible Aluminum Foam features evenly spaced, open pores.

Nov 30, 2012

Offering optimal heat exchange and impact absorption, Aluminum Foam is made by sand casting, which allows exact form of foam to be determined before manufacture. In heat exchange, 80-90% porosity and relative surface area up to 500 m²/m³ facilitate movement of fluids and recovery of heat. For impact absorption, reproducible aluminum foam product can be designed with end use in mind. Product... Read More

Safety & Security Equipment, Thermal & Heating Equipment

Insulating Material features high-temperature design.

Sep 29, 2011

Consisting of alkaline earth silicate material, Superwool® 607® HT(TM) offers safe-to-use alternative to traditional fiber-based insulation. Product's low biopersistence means that inhaled fibers are rapidly removed by natural processes within body. With classification temperature of 1,300°C, low shrinkage, and low thermal conductivity, insulation is suited for kiln linings, heat... Read More

Materials & Material Processing

Machinable Ceramic provides thermal conductivity.

Jan 22, 2010

Available as machinable rods and plates in range of sizes, as well as finished machined components, SHAPAL(TM)-M soft can be machined into complex shapes using carbide tools. Ceramic is valued in wide range of applications, particularly in vacuum and nuclear industries, where zero porosity, ability to seal under vacuum, and low thermal expansion are important. SHAPAL(TM)-M soft is also suited for... Read More

TPE is leather-fiber-filled.

Nov 14, 2007

Leather-fiber-filled thermoplastic elastomer (TPE) is available in both film and granules as well as compacted leather fiber granules for addition to polymer compounds. Leather-filled TPE can be processed by extrusion, injection molding, or calendaring, resulting in material that looks, feels, and smells like leather. Read More

Materials & Material Processing

Reticulated Foams feature low density.

May 24, 2007

Offered in aluminum, stainless steel, nickel, vitreous carbon, alumina, and silicon carbide, chemical resistant foams are reticulated with metal, carbon, and ceramic. They feature high surface area to volume ratio and high strength to weight ratio, and can be conductive/insulating depending on material chosen. Applications include porous electrodes, high-temperature insulation, filters, storage... Read More

Materials & Material Processing

Polyimide Film is resistant to alkali solutions and steam.

May 09, 2007

Used for capacitors, insulation, and PCBs, polyimide film features chemical structure that promotes hydrolytic stability and resistance to heat, radiation, and flammability. It also exhibits resistance to smoke emission, creep, and wear. While able to be used in aerospace applications, other areas of use include engine components, bearings, and mechanical parts exposed to radiation. Read More

Chemicals & Chemical Processing, Materials & Material Processing

Nonstandard Polymers come in injection-molded sheets.

Feb 08, 2007

Supplied as injection-molded plaques (sheets) in sizes from 60-250 mm² and thicknesses from 2.0-10.0 mm, nonstandard grades of various polymers are available in amounts that range from singular pieces to small production quantities. Available grades include polyetherimide, in black or amber; glass-filled Vectra B and polyphenylenesulfide; as well as polyphenylsulfone and polymethylpentene.... Read More

Materials & Material Processing

Wafers feature diamond on silicon construction.

Aug 24, 2006

Advanced Diamond Technologies (ADT) DoSi(TM) (diamond on silicon) electronics-grade wafers are coated with Ultrananocrystalline Diamond(TM) (UNCD(TM)) material, which exhibits all properties of natural diamond but with mirror-smooth surface that allows for control of surface properties. Suited for research and product design, wafers available in 100, 150, and 200 mm standard sizes and can be... Read More

Other Company News from
Goodfellow Corp.

Dec 17, 2007

x x.