Company News

The Sherwin-Williams Company

6910 Biddulph Rd, Cleveland, OH, 44115, USA

  • 216-741-6800

Latest New Product News from
The Sherwin-Williams Company

Paints & Coatings

Zinc Clad« 4100 Epoxy Coating is suitable for blasted steel.

Oct 11, 2017

Zinc Clad® 4100 Epoxy Coating comes with self-healing properties and help to reduce the need for sweat-in time. Unit is suitable for bridge and highway structures, stadiums and sports complexes, steel fabrication shops, piping, barges and ships, drilling rigs, and refineries applications. Product features recoat time below 30 minutes and comes in a user-friendly package.

Read More

Paints & Coatings

High-Gloss Polysiloxane withstands corrosive environments.

Sep 22, 2016

In just 2 coats, Sher-LoxaneÔäó 800 provides high-gloss finish to bridges, water tanks, structural steel, and many other steel surfaces. Smooth finish offers long-term color and gloss retention, as well as resistance to corrosion, chemicals, and abrasion. Formulated without isocyanates, high-solids Sher-LoxaneÔäó 800 has less than 100 g/l VOC, so it meets stringent environmental regulations.... Read More

Paints & Coatings

Corrosion Protection Epoxy targets water/wastewater market.

Apr 07, 2016

Protecting concrete and steel from corrosion in municipal and industrial wastewater treatment facilities, Dura-Plate® 6100 amine-cured, 100% solids epoxy is capable of film builds of 125+ mils in one coat, exhibits chemical resistance, and does not contain any solvent. Off-white, spray-applied, resinous coating, which dries to touch in 30 min at 77°F and cures for immersion in 12 hr, can be... Read More

Chemicals & Chemical Processing, Paints & Coatings

Thermal Insulative Acrylic Coating minimizes CUI risk.

Apr 06, 2016

By enabling dangerously hot systems like piping and ductwork to stay cool to the touch, Heat-Flex® 3500 prevents burns and protects personnel. Product can be applied to ambient or hot surfaces up to 350°F, minimizing downtime. Insulative and anti-corrosive properties enable plant owners to eliminate concerns related to corrosion under insulation (CUI). Available in white and slate gray,... Read More

Adhesives & Sealants, Construction Equipment and Supplies, Paints & Coatings

Cementitious Resurfacer offers 70-minute pot life.

Apr 06, 2016

Containing Part A Epoxy, Part B Hardener, and Part C Mortar, Dura-Plate┬« 2300 patches and fills voids┬áand bugholes in concrete and masonry structures. Water-based product provides hard surface with optimized adhesion that minimizes potential for pin-holing and outgassing problems typically associated with coating concrete. Dura-Plate 2300 can be dry to touch in 3ÔÇô4 hours and cures for... Read More

Green & Clean, Paints & Coatings

Epoxy Coating protects assets, food products, and environment.

Jun 13, 2011

Designed to prevent contamination when transporting and storing dry bulk food products, BPA-free CARFLEX(TM) HS meets FDA 175.300 for direct contact dry bulk storage. Polyamide-cured modified epoxy is formulated for lining rail hopper cars, storage tanks, marine vessels, and grain elevators. It offers corrosion protection and flexibility, and is impact and abrasion resistant. Applied as 1- or... Read More

Green & Clean, Materials & Material Processing, Paints & Coatings

Aliphatic Polyurea Coating provides crack bridging.

May 19, 2011

Designed to prevent yellowing and gloss reduction from UV light, EnviroLastic AL offers elastomeric performance by bridging gaps up to 1/8 in. Combination of weatherability, crack bridging capability, and adhesion properties make USDA-approved, seamless coating system suitable for interior/exterior walls and ceilings as well as exterior tanks and silos. Applied at thicknesses of 30-250 mils,... Read More

Chemicals & Chemical Processing, Paints & Coatings

Low-VOC Moisture-Cure Urethane Coating is chemical resistant.

Jan 14, 2010

With low temperature cure at 20┬║F and application in conditions up to 85% relative humidity, Cor-Cote HB Urethane provides 4 hr return to service and can be applied on concrete, as well as steel substrates. Reinforced with micaceous iron oxide, it delivers high abrasion resistance, film integrity, and edge retention qualities. Product is suited for municipal and industrial wastewater treatment... Read More

Green & Clean, Paints & Coatings

Wood Surfacer and Color System provides mar-resistance.

Dec 04, 2009

SHER-WOOD® KEM AQUA® PLUS pigmented color system is resistant to yellowing and provides fast build and hide in range of color options. SHER-WOOD® KEM AQUA® PLUS Surfacer offers optimal filling properties along with hiding and sanding capabilities, and is also available in wide range of base colors. Low-emitting coating systems meet or exceed various environmental regulatory requirements.... Read More

Paints & Coatings

Polyurea Primer can be applied to concrete and steel.

Sep 30, 2009

Fast drying Envirolastic® LT Primer is low-viscosity primer that can be applied in temperatures as low as 0ºF. At 77ºF, surfaces can be recoated after 1 hr, and at 40ºF, surfaces can be recoated after 5 hr. Suited for use with polyurea and polyurethane topcoats, primer offers long pot life for brush/roll applications and minimizes likelihood of irregularities in coating film caused by... Read More

Architectural and Civil Engineering Products, Paints & Coatings

Water-based Floorcoatings form protective glass/satin layer.

Sep 23, 2009

Containing less than 50 g/L VOCs, GP 4408/4409 WB Polyurethane Gloss/Satin topcoats can be used over concrete, terrazzo, or existing coatings in flooring projects. Both breathable, low-odor, waterborne polyurethane floor topcoats are chemically resistant and exhibit UV stability. Light foot traffic is acceptable within 8 hr for 4408 and 6 hr for 4409, and both products offer water-based cleanup... Read More

Materials & Material Processing, Paints & Coatings

Epoxy Coating checks mildew growth in damp, humid locations.

Aug 06, 2009

Supplied as 2-package industrial coating, Tile-Clad® High Solids Mildew Resistant epoxy protects against mildew growth on exterior surfaces where dampness and humidity are of concern. It features gloss finish and is offered in variety of safety colors. Applications include clean rooms, laboratories, institutional kitchens, and chemical processing equipment where mildew growth must be guarded... Read More

Paints & Coatings

Polyester Urethane suits industrial and marine applications.

Aug 05, 2008

Suited for interior/exterior use in industrial, marine, and commercial applications, Polylon HP Polyurethane provides high gloss and color retention as well as resistance to chemicals, abrasion, and impact. High-solids solution, with VOC level under 250 g/L, comes in range of colors as 2-component polyester-aliphatic urethane coating. It is also resistant to splashes, spillage, and fumes from... Read More

Paints & Coatings

Acrylic Polyurethane has water-based formulation.

Aug 05, 2008

Featuring Ozone Transport Commission (OTC)-compliant and Hazardous Air Pollutant (HAPS)-free formulation, Waterbased Acrolon 100 retains appearances over range of chemical, weather, and mechanical conditions. It is environmentally friendly, has VOC level under 100 g/L, and promotes color and gloss retention. Along with various marine and industrial applications, areas of use can include... Read More

Material Handling & Storage, Paints & Coatings

Chemical-Resistant Lining protects concrete and steel.

Apr 16, 2008

Suited for petrochemical, wastewater, power generation, and marine industries, ExpressCote HCR protects steel and concrete from chemicals and solvents at ambient and elevated temperatures. This 100% solids, chemical-resistant, glass flake-filled epoxy novolac lining allows return to full service in as little as 24 hr and walk-on condition within 5 hr when applied at 77┬░F with 50% RH. Solution... Read More

Adhesives & Sealants, Paints & Coatings

High-Solids Epoxy targets marine applications.

Apr 16, 2008

Free of hazardous air polluting solvents, anti-corrosive SeaGuard 6200 can be applied at temperatures as low as 20┬░F, making it suited for vessel maintenance during winter lay-up. Product may be used on many prepared steel substrates, including bilges and wet void areas, decks and superstructures, and underwater hulls. Applied by brush, roller, or spray, coating is suited for fabrication and new... Read More

Chemicals & Chemical Processing, Paints & Coatings

Coating withstands extreme exterior exposures.

Oct 09, 2007

Providing lasting color and gloss retention, FluoroKem Fluoropolymer Urethane Finish is graffiti, chemical, and abrasion resistant, and meets AWWA performance standards. Product has VOCs less than 340 g/l and can be applied by brush, roll, or spray to primed steel, galvanized steel, or aluminum. Applications include convention centers, water tanks, casinos, and other highly visible areas. Read More

Paints & Coatings

Paint glows in the dark for 4 hours.

Apr 16, 2003

Fast Glo Acrylic Safety Marking Paint is single component acrylic with phosphorescent luminescent pigment that enables paint to glow yellow/green in dark for up to 4 hours. Paint is for marking aisle ways, emergency routes, boundaries, and stairways to identify safe passageways in event of power outage or failure of back-up power systems. It can be applied by brush, roll, or spray and comes in... Read More

Other Company News from
The Sherwin-Williams Company

Apr 05, 2016