Richco, Inc.
Forest Park, IL 60130
Share:
Quarter Turn Panel Fastener joins panels up to .24 in. thick.
Designed to join 2 panels together, QTPF series fastener installs with push of finger. Using flat-head screwdriver or coin, quarter-turn releases bottom panel while retaining fastener in removable panel. Unit can be used multiple times, features low profile, and is RoHS-compliant.
Read More »Snap Rivets feature countersunk design.
Designed for flush surfaces, RoHS-compliant SRCS Series substitutes normal countersunk screws and bolts and is installed by hand. Tamper-resistant design allows access from back of panel only, while locking feature holds pin flush in body after installation.
Read More »Cable Ties suit indoor and outdoor applications.
Made of stainless steel, MT Series provides durable method for fastening. Cable ties offer tensile strength up to 250 lb and can withstand extreme temperatures up to 1,000Ã-
Read More »Barbed Fasteners are suited for various materials.
Fastening to wood, threaded metal, particle board, plastic, foam, and rubber panels, BHF series barbed fasteners also suit wide range of panel thicknesses. As fastener clips are installed, ribs deflect and spring back after passing through hole for secure, nonremovable lock. Units are RoHS-compliant and other combinations of head, body, and tips are available.
Read More »Flat Tie Holder targets Kwik wrap/hook and loop.
Holding hook and loop cable ties up to Ã-½ in. wide, FTH-27 series features square hole mount that prevents rotation and is designed to be mounted in standard 19 in. racks. Flat tie holder is RoHS-compliant.
Read More »Cable Tie Holders feature fir tree mount.
Providing secure grip in mounting hole, FTH-36 and -37 series products offer low insertion force and allow for preassembly of cable ties into holder. Units, which are RoHS-compliant, include cupped base that covers hole and provides protection against contamination.
Read More »Pressure Hold Cable Tie Holder is RoHS compliant.
Accepting WIT-18 thru -50 and QTE-18 thru -50 cable ties, FTH-3A-01 pressure hold cable tie holder allows for preassembly of cable tie into holder because it holds it in place. RoHS compliant unit provides pressure hold onto cable tie.
Read More »Richco, Inc. Releases FCWSS Series Flat Cable Wire Saddle
MORTON GROVE, IL - February 25, 2009 - Richco, Inc. is happy to announce the release of its new flat cable wire saddle series, the FCWSS. The FCWSS is designed to hold down standard Serial ATA cable. It is easily installed into a pre-drilled hole and its locking top is releasable for repair or replacement of cables. The flexible wing accommodates a range of cable thicknesses and provides a slight...
Read More »Removable Barbed Fastener is RoHS compliant.
Removable barbed fastener, BPFR can be installed in 5/16 (M8) threaded hole or 7 mm non-threaded through hole or blind hole, and removed using Phillips screwdriver. As clips are installed, ribs deflect and spring back after they pass through hole for secure, non-removable lock.
Read More »Richco, Inc. Releases WIT-50XA Arrowhead Cable Ties
MORTON GROVE, IL - February 25, 2009 - Richco, Inc. is pleased to announce the release of its new arrowhead cable ties, the WIT-50XA. The WIT-50XA features an integrated arrowhead mount that reduces inventory and saves time in application. The tension wings provide pressure to the panel stabilizing the mount. The WIT-50XA also allows for the bundling of cables to be done before or after mounting...
Read More »Quarter Turn Panel Fastener joins panels up to .24 in. thick.
Designed to join 2 panels together, QTPF series fastener installs with push of finger. Using flat-head screwdriver or coin, quarter-turn releases bottom panel while retaining fastener in removable panel. Unit can be used multiple times, features low profile, and is RoHS-compliant.
Read More »Snap Rivets feature countersunk design.
Designed for flush surfaces, RoHS-compliant SRCS Series substitutes normal countersunk screws and bolts and is installed by hand. Tamper-resistant design allows access from back of panel only, while locking feature holds pin flush in body after installation.
Read More »Cable Ties suit indoor and outdoor applications.
Made of stainless steel, MT Series provides durable method for fastening. Cable ties offer tensile strength up to 250 lb and can withstand extreme temperatures up to 1,000Ã-
Read More »Barbed Fasteners are suited for various materials.
Fastening to wood, threaded metal, particle board, plastic, foam, and rubber panels, BHF series barbed fasteners also suit wide range of panel thicknesses. As fastener clips are installed, ribs deflect and spring back after passing through hole for secure, nonremovable lock. Units are RoHS-compliant and other combinations of head, body, and tips are available.
Read More »Flat Tie Holder targets Kwik wrap/hook and loop.
Holding hook and loop cable ties up to Ã-½ in. wide, FTH-27 series features square hole mount that prevents rotation and is designed to be mounted in standard 19 in. racks. Flat tie holder is RoHS-compliant.
Read More »Cable Tie Holders feature fir tree mount.
Providing secure grip in mounting hole, FTH-36 and -37 series products offer low insertion force and allow for preassembly of cable ties into holder. Units, which are RoHS-compliant, include cupped base that covers hole and provides protection against contamination.
Read More »Pressure Hold Cable Tie Holder is RoHS compliant.
Accepting WIT-18 thru -50 and QTE-18 thru -50 cable ties, FTH-3A-01 pressure hold cable tie holder allows for preassembly of cable tie into holder because it holds it in place. RoHS compliant unit provides pressure hold onto cable tie.
Read More »Richco, Inc. Releases FCWSS Series Flat Cable Wire Saddle
MORTON GROVE, IL - February 25, 2009 - Richco, Inc. is happy to announce the release of its new flat cable wire saddle series, the FCWSS. The FCWSS is designed to hold down standard Serial ATA cable. It is easily installed into a pre-drilled hole and its locking top is releasable for repair or replacement of cables. The flexible wing accommodates a range of cable thicknesses and provides a slight...
Read More »Removable Barbed Fastener is RoHS compliant.
Removable barbed fastener, BPFR can be installed in 5/16 (M8) threaded hole or 7 mm non-threaded through hole or blind hole, and removed using Phillips screwdriver. As clips are installed, ribs deflect and spring back after they pass through hole for secure, non-removable lock.
Read More »Richco, Inc. Releases FTH-39 Cable Tie Holder
MORTON GROVE, IL - February 25, 2009 - Richco, Inc. is delighted to announce the release of its new cable tie holder, the FTH-39. The panel fastener and tie holder are combined in one product, and the low profile head design saves space. The FTH-39 allows for the preassembly of cable ties and holds them in place after preassembly. The FTH-39 is RoHS compliant. To review the FTH-39 or other cable...
Read More »