Ilsco

Construction Equipment and Supplies

Aluminum Compression Connector serves wind energy applications.

Made of 1350 aluminum alloy, ALNN-1000-12-134 is designed for 1000kcmil conductor that connects vital wiring infrastructures of wind turbines. Electro-tin plating imparts corrosion resistance; 2-hole mounting tang ensures secure, tight connection; and chamfered barrel facilitates smooth conductor insertion. Suitable for use with copper or aluminum conductor, this UL Listed and CSA Certified...

Read More »
ILSCO Enhances Offering of Grounding Connectors for Solar Energy Applications
Construction Equipment and Supplies

ILSCO Enhances Offering of Grounding Connectors for Solar Energy Applications

ILSCO introduces two new connectors for solar panel grounding, SGB-4 and GBL-4SS. The connectors are designed to prevent galvanic reactions and enhance conductivity. The SGB-4 connector body has extruded serrations for breaking the anodized finish on photovoltaic modules and frames. The serrations in the wire binding break corrosion on the grounding wire which means that no surface preparation is...

Read More »
Construction Equipment and Supplies

ILSCO Expands Offering on NIMBUS®4FLEX

ILSCO is pleased to announce an exciting enhancement to its NIMBUS4FLEX line of pre-insulated connectors. NIMBUS4FLEX now accommodates the broadest range and size of conductor types, giving the marketplace the greatest flexibility of any pre-insulated product on the market today. The broad wire range on the NIMBUS4FLEX product now ranges from 750kcmil / 535.3 DLO - #14 AWG. Most pre-insulated...

Read More »
Construction Equipment and Supplies

ILSCO Achieves NEBS Level 3 Approval

ILSCO®, a manufacturer of industrial and specification grade compression and mechanical lugs is pleased to announce that ILSCO's line of SureCrimp® copper compression connectors and splices were tested by Telcordia and meets NEBS Level 3 Criteria. ILSCO offers the largest selection of copper compression connectors that meets NEBS Level 3 Criteria, accepts both building wire and flex...

Read More »
Bronze Waterpipe Clamps safely deliver required grounding.
Construction Equipment and Supplies

Bronze Waterpipe Clamps safely deliver required grounding.

Featuring silicon bronze hardware, Type GPL3 series fits IPS pipe sizes from Â-½-12 in. and accepts ground conductor sizes from 4-4/0. UL-Listed and CSA-Certified products, resistant to corrosion, rotate 90° for installation flexibility. Suitable for direct bury in earth or concrete, series supports use within industrial construction, maintenance, power plants, sub-stations, and...

Read More »
Nimbus® Product Enhancement
Construction Equipment and Supplies

Nimbus® Product Enhancement

NIMBUS pre-insulated connectors from ILSCO® have an expanded wire range and are now suitable for 600kcmil - #4 AWG conductors to accommodate the popularity of the larger 600kcmil wire size. The previous wire range was 500kcmil - 4. This enhancement affects Type PBTD, PBTS and PBTM. This enhancement also increases the amperage to 475 Amps, from 430 Amps. The NIMBUS series is UL Listed, CSA...

Read More »
ILSCO® Connectors Installed in Cincinnati Zoo Solar Array Project
Architectural & Civil Engineering Products

ILSCO® Connectors Installed in Cincinnati Zoo Solar Array Project

The Cincinnati Zoo recently completed a project in which 6,400 solar panels were installed by ProtekPark Solar on a canopy structure over one of the Zoo's parking lots. ILSCO's TA-300 connectors were installed in forty-five combiner boxes which are used for electrical distribution and act as a termination point for each solar panel or array. This solar panel array will generate 20% of the...

Read More »
ILSCO® Installs Solar Panel Array
Construction Equipment and Supplies

ILSCO® Installs Solar Panel Array

In 2010, ILSCO entered into an agreement with Entero Energy (Austin, TX) to engineer, purchase, and install a solar array on the roof. This project was completed in early 2011 and the electricity generated provides supplemental power to our corporate location in Cincinnati, OH. ILSCO's tin-plated copper lay-in GBL and new SGB connectors were used throughout the installation on panels to provide...

Read More »
ILSCO Surecrimp® UL 467 Listed
Construction Equipment and Supplies

ILSCO Surecrimp® UL 467 Listed

SureCrimp® copper compression connectors, from ILSCO, with a conductor range 1/0 - 8 are now UL 467 Listed for grounding and bonding. SureCrimp is available in various configurations, including bent and narrow tang, standard and long barrel, with one hole or two hole tang, as well as sight hole or no sight hole. SureCrimp reduces inventory requirements; the connectors accept multiple...

Read More »
Copper Compression Connectors come in 45°and 90° bent tang versions.
Construction Equipment and Supplies

Copper Compression Connectors come in 45°and 90° bent tang versions.

Offered in 45° and 90° bent tang configurations, SureCrimp® copper compression connectors are designed for angled surfaces, perpendicular connections, or stacking applications. Bent tangs allow flat, secure connection to mounting surface, even if wire is not be parallel to surface. Made from seamless copper tubing, connectors feature electro-tin plating and are die stamped with...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers