Moyno Inc. Unit Of Robbins & Myers, Inc.
Springfield, OH 45501 0960
May 31, 2005 Self-contained Pipelinerâ„¢ Grinder eliminates ragging in secondary and tertiary sludge applications. Single-shaft unit features tungsten carbide adjusting cutters, spring-loaded cutter assembly that maintains constant force against shearplate, on-site cutter replacement without disconnecting piping, and single mechanical seal with silicon carbide faces. Standard shearplate hole is 15 mm, with optional hole sizes of 6, 8, 10, and 20 mm available.

JWC Environmental
Costa Mesa, CA 92626
May 18, 2005 Channel Monster® CMD1205-AD employs 5 in. diameter drum to direct solids into cutting chamber, allowing installation in channels as narrow as 14 in. Drums are available with either ¼ in. coil spacing or ¼ in. perforations. Grinder operates on 3 hp motor with 29:1 reducer and is available with optional 5 hp motor for difficult grinding installations. Applications include wet wells, industrial waste channels, prison sewage systems, and influent channels.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Feb 16, 2005 Spiralift® VL conveys material straight up vertically oriented transport tube, making it suited for tight spots such as pump stations and wet wells. Shaftless auger screw clears solids from stainless steel cylindrical screen. Unit is supplied with tube washing spray manifold, screen brushes, perforated stainless cylindrical screen, stainless steel housing, 1½ hp motor, helical gear drive, system controller, and level sensor.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Oct 22, 2004 With TASKMASTER® TM8500, banks of individual cutters and spacers are replaced by 1-piece catridges. Cutters are installed on 2 counter rotating shafts, intermeshing at close clearance to shear and shred solids. All elements are machined from solid alloy steel or stainless steel. Suitable for inline, open channel, or gravity installations, grinder is useful in sewage treatment plants, sludge lines, pumping stations, or small solid waste applications.

Abanaki Corp., Oil Skimmer Div.
Chagrin Falls, OH 44023
Oct 15, 2004 Coolescerâ„¢ Coolant Refresher takes place of skimmer and aeration system in portable package. Self-contained system removes tramp and hard-to-pick-up grey oils from machine tool coolant sumps, helping to elminate coolant odor. It pumps top ¼ in. layer of coolant and oil through coalescing cartridge where oil is separated from coolant and removed via oil discharge valve. Cleaned coolant is aerated and pumped back to coolant sump.

Moyno Inc. Unit Of Robbins & Myers, Inc.
Springfield, OH 45501 0960
Jul 22, 2004 Featuring one-piece flange housing and quick-change cutter cartridge, Series 4 Annihilatorâ„¢ Grinders are twin-shaft solids reduction units suited for industrial and municipal applications. Equipped with counter-rotating, intermeshing cutters and spacer cutters, grinders protect downstream equipment from being plugged or damaged from large solids.

Pall Corporation
Port Washington, NY 11050-4630
Jul 08, 2004 Designed for liquid/liquid separations in refinery, chemical, flavor and fragrance, and biotechnology industries, PhaseSep® HE Series Coalescer handles difficult emulsions. It captures small, emulsified droplets while still allowing economical flux rates. Constructed of fluoropolymer medium and stainless steel hardware to meet chemical compatibility requirements, unit features pore structure suited for coalescing.

Ohaus Corp.
Pine Brook, NJ 07058
Jun 09, 2004 MB Series determines solids content of wastewater/sewage and ensures compliance with all relevant regulations before releasing treated wastewater back into environment. Products in series combine uniform IR halogen heating to 200°C with weighing technology. Analyzer processes one sample in less than 30 min and can be used at numerous points throughout testing process. Unit features readability to 1 mg, 0.01% moisture, and 45 g capacity.

Ruddux Corp.
Basking Ridge, NJ 07920
Dec 04, 2003 Portable Model 50-C treats water-based coolants in individual machine sumps. Suction strainer, pump, and coalescer mount on portable platform and are served by Ruddy Duck Deep Skimmer that is placed on coolant surface. Top ½ in. of contaminated coolant is removed (free oil and cream phases), and delivered to coalescer for oil separation. System operates unattended and treats in sump, at sump, in central tank, or any combination of these modes.

UAS Canada Inc.
Abbotsford, BC V2T 6L6
Jul 21, 2003 Based on Non Thermal Plasma technology, IonO²x treats air and gas emissions by converting odor, VOCs, and complex organic compounds to CO₂ and H₂O. Using electricity, unit treats air volumes from 500–350,000 cfm. Product treats vent and process air from general process activities where odor and fumes are entrained in emitted air. It is also suited for process factories for food, pet, fish, and animal feed odor for drying and cooling air venting.

Smith & Loveless, Inc.
Lenexa, KS 66215 1234
May 22, 2003 Hood Lift Assist retrofit kit installs on 2- and 3-pump Classic Wet Well Mounted Pump Stations. After installation, operator has no more than 30 lb to lift at any point during opening of hood, while still having clear access to all pumps, motors, piping, and controls. Kit includes shocks, brackets, labels, and parts needed for installation.

Thermo Electron Corp.
Waltham, MA 02454-9046
Feb 20, 2003 AQUAfast® analysis kits offer AQ4000 colorimeter and company's portable meters, electrodes, and reagents for wastewater and environmental measurement and testing. Kits provide complete portable laboratory in one package for on-site field measurements. Water Analysis Kits, designed for field measurements of Ammonia, Nitrate, Sulfide, Chlorine, Fluoride, Cyanide, conductivity, and pH, are targeted for clean water, dirty water, and water conditioning tests.

Alfa Laval Inc.
Richmond, VA 23231
Jan 29, 2003 ALSYS 400 Series offers capacities ranging from 8–70 gpm and handles variety of common sludge types. Automatic operation allows for minimal operator attention. Each module consists of progressing cavity pump, flow meter, polymer make-up unit, piping, valves, and screw conveyor for dewatered sludge. Central control panel ensures trouble-free operation and safety. Modules are mobile and can be rotated to serve several small wastewater plants.

Zebra Skimmers
Solon, OH 44139
Sep 24, 2002 Zebra Muscleâ„¢, consisting of skimmer, aerator, and oil separator, includes spin-welded fittings to create leak-proof skimming system. Available in 3 different models, system includes non-kinking, crush-resistant coolant hose, 1 gpm submersible pump, and translucent 15 gal barrel. Zebra Muscle aerates, filters, and separates coolant from tramp oil so that coolant lasts longer.

Hayward Industrial Products, Inc.
Elizabeth, NJ 07207
Sep 16, 2002 Series CLC Coalescers/Separators have 2-stage design that allows them to remove 99% of all liquid and solid particulate matter larger than 4 microns from air and gas streams. Units have no moving parts to fail or wear out. Applications include compressed refrigeration gases, evaporator overhead steam, high pressure gas at injection wells, fuel gas lines to engines in power and industrial plants, and regulator stations.

Zebra Skimmers
Solon, OH 44139
Aug 08, 2002 Muscleâ„¢ coalescing system can be customized with several options to meet machine shop needs. Regular, Plus, and Deluxe option packages are designed for portability, filtering, coalescing, improved separation, and fluctuating fluid levels. Options include: Sumpster, to remove floating oils; Coalescing Cartridge, to increase surface area; Fine Stopper, to remove floating chips and swarf; Oxygenator, to kill anaerobic bacteria; and Drum Dolly to provide portability.

Moyno Inc.
Springfield, OH 45501 0960
Apr 10, 2002 2000 HS System, designed for transferring dewatered sludge in municipal wastewater treatment, features integral hopper with twin-screw auger feeder and Model 2000 G4 progressing cavity pump for handling semi-dry, high solids content material. Feeder supplies constant pressurized feed rate to pump resulting in 100% pump cavity fill rate. Configurations include: C-Flow, S-Flow, T-Flow, U-Flow, and Z-Flow.

Netzsch, Inc.
Exton, PA 19341
Jan 04, 2002 CONTIPRESS dewatering filtration system is available in 11 different sizes, and is suitable for dewatering slurries and suspensions. It operates at slow revolutions (0.5 to 2.0 RPM) producing very low noise level. Sludge cake that is produced after thickening, dewatering, and squeezing is continuously discharged; no manpower is necessary to operate system.