New Pig Corporation    Tipton, PA 16684 0304
Apr 03, 2013 Safety-yellow, heavy-gauge steel PIG® Spill Kit in a Cabinet arrives assembled, complete with adjustable shelves, and ready to serve as central spill response center. Lockable drawers are suited for PPE, patch and repair supplies, and other quick response-related items, and tamperproof seals help prevent pilfering. This spill response center also features coat rack and comes with PIG® BLUE Socks, PIG® Mat and Pillows, wipers, and temporary disposal bags with ties.

New Pig Corporation    Tipton, PA 16684 0304
Mar 21, 2013 Used indoors or outdoors, Build-A-Berm® Barrier Kit lets facilities create semi-permanent spill containment barrier around machinery or storage areas without building cement curbs or cutting and installing angle iron. Pliable, open-cell solution can be shaped to suit any application or environment and returns to original state after being walked on or rolled over. While high-visibility yellow color increases safety, 18 oz, all-vinyl covering resists oils, coolants, and chemicals.

New Pig Corporation    Tipton, PA 16684 0304
Mar 21, 2013 Constructed of polypropylene, PIG® Hazmat Spill Kit in See-Thru Container enables facilities to conduct visual inventory inspections. Container holds enough PIG® Pads, Socks, and Pillows to absorb up to 8 gal of acids, bases, and corrosive hazardous liquids. Snap-tight lid protects absorbents from dirt and moisture during storage, while 1.5 in. casters allow kit to roll over smooth surfaces. Ampho-Mag Neutralizer instantly turns blue for bases, red for acids, and yellow/green when neutralized.

Smart Fog    Reno, NV 89503
Oct 08, 2012 Allowing chemicals to be distributed uniformly throughout specified area while penetrating every surface, Food Safety and Disinfection Solutions provide complete produce decontamination with low to no residue chemicals. Systems include data retention for food safety regulatory audit requirements. Featuring non-wetting disinfection process, products include NEM Series no escape mobile disinfection cart, ES100 Series automated humidification system, Smart Fog tunnels, and MS100 Series humidifier.

Bioquell, Inc.    Horsham, PA 19044
Jan 06, 2012 Suited for life science and pharmaceutical markets, Bioquell Z-2 HPV System interfaces with Yokogawa's DXAdvanced DX1000 and DX2000 data recorders, allowing key parameters to be logged and providing secure method to store bio-decontamination cycle data. Yokogawa station does not have to be directly linked to Bioquell Z-2 as information can be transferred over computer network. DX1000 and DX2000 devices are also available as 21 CFR Part 11 compliant.

IRT - Immediate Response Technologies (formerly TVI Corp. & Safety Tech Int'l.)    Glenn Dale, MD 20769
Nov 18, 2011 Available in 9 and 25 lb bags, 100% biodegradable DualZorb quickly encapsulates spills and instantly begins bioremediation of petroleum hydrocarbons. Low-dust product, in certain applications, can also be utilized as compost or left in-situ. Able to be stored in HMMWV or emergency vehicle, product provides hazard mitigation capabilities and can absorb most liquids, heavy metals, and salts. Spills are encapsulated into non-leaching form, and product is safe for disposal.

Interstate Products, Inc.    Sarasota, FL 34233
Nov 03, 2011 Rapid Entry and Ready L-Bracket berms can be manufactured to accommodate up to 18 in. T brackets for large support and containment requirements. Able to hold up to 748 gal, L-Bracket Berm folds down to compact size for storage and transport. Construction is of 30 mil XR-5® geomembrane, which is made from heavy-duty reinforced fabric that accommodates rapid entry of trucks and tankers. Products provide countermeasure to help contain and clean up hazardous liquids in case spills occur.

New Pig Corporation    Tipton, PA 16684 0304
Oct 21, 2011 Suited for cleaning up large quantities of transformer oil leaks or spills outdoors, PIG® Transformer Spill Kit contains enough oil-only absorbent mats, pillows, and booms to absorb up to 40 gallons of transformer oils on water or land. Opaque, UV-resistant polyethylene container blocks sunlight from degrading both contents and container for up to 8,000 hours. To protect against pilfering, kit features leakproof, twist-on lid and tamperproof seal.

New Pig Corporation    Tipton, PA 16684 0304
Oct 20, 2011 Able to capture and absorb nuisance leaks at source before they hit floor, PIG® LEAKTRAPPER(TM) Universal Absorbent Pillow features loop-backed bottom and attaches securely to heavy-duty Velcro® hooks to facilitate positioning around hose connections or anything that leaks. Cellulose filler absorbs up to 33 oz of oil, coolant, solvent, or water per pillow, while puncture-resistant, impermeable poly backing prevents strike-through onto surfaces.

New Pig Corporation    Tipton, PA 16684 0304
Oct 20, 2011 Offered in rolls, pads, rugs, or dispenser box, PIG® Grippy® Mat has adhesive bottom and soaks up leaks, drips, and overspray without bunching, curling, or sliding. Mat withstands high-traffic work areas/walkways and peels up without leaving residue. Featuring spunbond top layer with heavy-duty stitching and 8 layers of fine-fiber polypropylene, NFSI-certified product absorbs oils, coolants, solvents, and water. Poly backing creates additional barrier to prevent pass through to floor.

Basic Concepts, Inc.    Anderson, SC 29621
Oct 05, 2011 Used for secondary containment, Rigid-Lock Quickberm does not require assembly and features single-piece construction as well as foldable, right-angle locking wall support. One tug on side wall secures Rigid-Lock support into firm, locked position. When pushed, wall unlocks Rigid-Lock support and lays wall down. Rigid-Lock support can be driven over from any angle when in lowered position, and ergonomic design reduces tripping hazards.

Interstate Products, Inc.    Sarasota, FL 34233
Sep 21, 2011 Available in 2-6 in. wall heights, Drive-Over Foam Wall Spill Berms help users comply with regulations contained in 40 CFR part 112 of Clean Water Act and other SPCC requirements. Systems are manufactured using heavy-duty reinforced chemical-resistant fabrics to trap fuel, oil, acids, gasoline, hydrocarbons, and other hazardous chemicals. Offered in sizes up to 50 ft x 75 ft x 6 in., berms have collapsible design that allows tankers to drive in and out without lowering walls.

XEI Scientific Inc,    Redwood City, CA 94063
Jul 26, 2011 Evactron® CombiClean(TM) facilitates control and operation of multiple plasma radical sources for column and desktop cleaning of specimens for electron columns used in SEMs, TEMs, and FIBs. With integrated controller and vacuum chamber, operator can select which PRS is active via system front panel and switch between column cleaning and desktop de-contamination of parts destined for use in microscopes. Dry nitrogen purging prevents back streaming after plasma cleaning and during sample storage.

Advanced Sterilization Products    Irvine, CA 92618
Mar 23, 2011 Available for new or existing STERRAD® 100NX(TM) Systems, EXPRESS Cycle provides 24 min, low-temperature cycle validated for surface sterilization of da Vinci® 3D endoscopes, rigid telescopes, rechargeable batteries, and other devices. This feature upgrade, which supplements existing 42 min FLEX and 47 min STANDARD options, sterilizes instruments without causing damage. Range of cycles ensures end-users have flexible and long-term sterilization options.

AIRE Industrial Products    Meridian, ID 83642
Mar 08, 2011 Forged out of 3 in. wide 6061-T6 grade metal, L Stay Put Bracket(TM) Berm can withstand gusts and will keep grounded. Stays slide under berm, eliminating falling and tripping hazard and enabling OSHA compliance. Design is suitable for tank containment, transformer containment, fuel spill prevention under vehicles, and permanent placement under large oil containing equipment.

UltraTech International, Inc.    Mentor, OH 44060
Dec 23, 2010 Designed to help meet Spill Prevention, Control, and Countermeasure Plan requirements, Ultra-Containment Berms capture small and large spills from tanker trucks, military vehicles, and other heavy equipment. Drive in-drive out sidewalls lay down when driven through, then automatically spring back to upright position. Designed with chemical-resistant Copolymer-2000 material, berms come in standard and custom sizes and can be rolled up for storage.

AIRE Industrial Products    Meridian, ID 83642
Nov 16, 2010 Providing short-term spill management solution for leaky or damaged drum, Encapsa Berm encapsulates drum, eliminating need to place it on any type of plastic spill container. User slides drum inside bag and rolls down top to create air-tight seal and contain all liquids. With Encapsa Berm, drums can be individually contained and moved, and space is gained by not having bulky platforms clutter workspace.

UltraTech International, Inc.    Mentor, OH 44060
Oct 07, 2010 Constructed with 12 in. tall sidewalls held upright by PVC sidewall supports, Collapsible Wall Model Containment Berms help meet EPA Container Storage Regulation 40 CFR 264.175. Swiveling feet of supports will lower sidewalls in seconds, allowing vehicles and equipment to roll over top for entry/exit. Standard material of construction is Copolymer 2000, reinforced polymer-coated fabric with chemical resistance, and berms fold up for compact storage and transport.

Hydro Engineering, Inc.    Salt Lake City, UT 84119
Jul 16, 2010 Featuring portable, self-contained design, Hydrosite Decontamination System includes modular wash rack that collects wastewater and oil, which is then pumped to filtering and recycling equipment that separates water from oil. Recycled water is sent back to high-pressure washers for reuse. System can be used anywhere level ground, water source, and electric power from grid or generator can be found.

Basic Concepts, Inc.    Anderson, SC 29621
May 28, 2010 Measuring 14 ft x 40 ft x 10 in., Rigid Containment System (RCS) meets/exceeds EPA, state, and federal regulations for secondary spill containment of refueler trucks and is designed for high-traffic use and long-term applications. Other uses include wash racks, loading/unloading areas for fuels and chemicals, and decon site. Able to be relocated without disassembly or permitting, berm features heavy duty C channel and I beam wall construction.