Crosscheck Networks    Newton, MA 02464
Dec 06, 2010 With ability to emulate virtually unlimited number of concurrent users, SOAPSonar 6.0 empowers enterprises to test their services across multiple cloud providers including Amazon EC2, OpSource Cloud, GoGrid, and Rackspace. Program achieves real-world scenario testing with demographically disparate loading agents. By aggregating information from agents into single, unified console, SOAPSonar lets users view service performance profile for each cloud provider.

Racelogic Ltd.    Buckingham   United Kingdom
Nov 30, 2010 Capable of recording, replaying, and simulating GLONASS and GPS data, LabSat 2 enables developers to test professional and consumer GNSS-featured products. Unit uses computer with USB 2.0 connection to record raw signals from GPS/GLONASS antenna directly to hard disk, with no limitations on number of satellites being tracked or length of recording. When data is replayed, GNSS engine under test will re-create all movement and satellite reception encountered.

VanDyke Software Inc.    Albuquerque, NM 87111-2873
Oct 28, 2010 Offered as secure terminal client for Windows® and Mac OS X®, SecureCRT v6.6 helps network administrators securely manage remote access as well as tunnel e-mail, web, and corporate application data. Functionality, in addition to promoting effective access and management of legacy applications, lets users configure routers, maintain web servers, and perform systems maintenance.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Oct 06, 2010 Featuring direct digital connection to E5515C 8960 wireless communication test set, N5106A PXB baseband generator/channel emulator enables R/D engineers to validate receiver sensitivity of wireless devices under real-world signal conditions. Unit provides up to 6 baseband generators, 8 faders, and more than 20 calibrated configurations up to 4 x 2 MIMO. PXB capability supports real-time fading for W-CDMA/HSPA, GSM/GPRS/EGPRS, cdma2000®, and 1xEV-DO technologies on 8960 test set.

North Atlantic Industries, Inc.    Bohemia, NY 11716
Sep 27, 2010 Accepting reference voltages from 2-115 Vrms over frequency range of 47 Hz to 10 KHz, Model 5330A generates output voltages from 1-90 VLL. Two fully independent outputs can be used to simultaneously simulate 2 separate Synchro/Resolver signals or be combined to operate as 2-speed output with support for up to 6 Va total. Intelligent DSP eliminates push buttons and allows programming to be done via integrated touchscreen, front panel USB mouse interface, or increment/setup knob.

GAO Tek Inc.    Toronto M1B2K4  Canada
Sep 01, 2010 Designed for servicing of hearing aids and production testing of earphones, Model 6161 measures frequency response, sensitivity, and distortion. Main ear canal volume is similar to that of actual human ear and provides similar acoustic impedance to insert earphone being tested. Compliant with IEC60711 standard, simulator features frequency response accuracy of less than ±0.5 dB at 200-5,000 Hz and less than ±1 dB at 20-10,000 Hz.

GOEPEL electronics LLC    Austin, TX 78759
Aug 24, 2010 Structured modularly as intelligent IP, VarioTAP® models enable complete fusion of Boundary Scan test and JTAG emulation. Employing this technology, embedded or external Flash can be in-system programmed via native processor function. Additionally, VarioTAP® supports interlaced Bus Emulation Tests and System Emulation Tests for extended JTAG/Boundary Scan functionality. Multitude of possible configurations including multi-processor and multi-core applications is supported.

Netlist, Inc    Irvine, CA 92618
Jul 16, 2010 Measuring 8.0 x 13 x 1 mm, DLS1-DRAM Load Simulator for DDR1 has JEDEC standard footprint for x4, x8, or x16 organized devices on bottom and access points on top. Model DLS2-DRAM Load Simulator for DDR2 SDRAMs features JEDEC standard footprint for x4 or x8 organized devices and has dimensions of 11.6 x 14 x 1 mm. Both feature solder balls on surface to probe key DRAM I/O signals, and enable signals to be tested at point of origin or termination.

Oriel Instruments Corp.    Stratford, CT 06615
Jul 15, 2010 Sol3A(TM) 12 x 12 Solar Simulator utilizes one 1,600 W xenon arc lamp with optical design capable of meeting spectral match, non-uniformity of irradiance, and temporal stability performance criteria without compromising 1 Sun output power. Offering Class AAA performance, instrument incorporates stable spectral correction filter that can withstand lamp intensity without changing spectral properties. Product suits PV applications requiring constant-wave (CW) light source.

GL Communications Inc.    Gaithersburg, MD 20877
Jul 08, 2010 Message Automation and Protocol Simulation(TM) (MAPS) SIGTRAN supports testing network elements, error tracking, regression testing, conformance testing, load testing/call generation, and generation of high volumes of ISUP traffic. Functionality covers ITU and ANSI variant of SS7 implementing M3UA and ISUP protocols, and pre-defined test scenarios can be run against ISUP test objects in controlled and deterministic manner. GUI-based SIGTRAN (SS7 over IP) protocol analyzer is also available.

GL Communications Inc.    Gaithersburg, MD 20877
Jun 22, 2010 Digital Central Office Switch Simulator is high-density switch/traffic generator that supports large volumes of any traffic, including voice, fax, modem, and tones. System is used for lawful interception, automated attendant, IVR testing, gateway/ATA modem and fax testing, and SS7 network simulation. Able to communicate with external networks, it includes T1 and E1 trunks and analog and BRI ISDN phone interfaces as well as user-defined scripting.

GOEPEL electronics LLC    Austin, TX 78759
May 12, 2010 VarioTAP® supports non-JTAG debug interfaces such as BDM interface and MCU of Freescale MPC5xx series with power architecture. Up to 8 non-JTAG targets can be controlled using hardware platform SCANFLEX® and, during programming of embedded or external Flash, script generation is done automatically. All IP functions for bus and system emulation enable test of on-chip interfaces without prior Flash firmware programming as well as execution of program codes via VarioTAP® model API.

Aeroflex    Irvine, CA 92618
Apr 07, 2010 Model GPSG-1000 portable GPS and Galileo positional simulator can be configured with single-channel, 6-channel, or 12-channel simulation. Simulating L1, C/A code, and L1C, L2C, and L5 GPS modernization signals as well as Galileo E1, E5, and E6 signals, it uses modular technology for RF/baseband signal generation to ensure accuracy/repeatability. Tests include acquisition sensitivity, tracking sensitivity, subsystem simulation for 3D flight execution, positional accuracy, and more.

COMPRION GmbH    Paderborn 33100  Germany
Mar 25, 2010 COMPRION SIMfony for CDMA2000 combines R-UIM/CSIM simulator IT³ Test Platform for conformance testing and network simulator Spirent AirAccess C2K, or terminal tester IT³ Prove! for preconformance testing. It is available with OMH test cases according to OMH test plan version A, June 2009, and will cover tests in C.S0048-A. Support for CSIM simulation and translation is included as well. System is also available for GSM/W-CDMA and LTE network technologies.

United Electronic Industries    Canton, MA 02021
Jan 18, 2010 DNA and DNR versions of DNx-AO-358 boards are suited for use with PowerDNA Cubes and rack-mounting in PowerDNR RACKtangle/HalfRACK chassis, respectively. Both versions provide 8 channels of simulated strain gage output, with update rate of 0-5 kHz, based on signals from real variable resistor bridges that duplicate behavior of strain gages simulated. Each version may also be ordered in full or half/quarter bridge configuration with 120, 350, or 1000 ohm bridge completion resistances.

Magna-Power Electronics    Flemington, NJ 08822
Jan 07, 2010 With sampling rate of 5 ms, Photovoltaic Power Profile Emulation Software automatically calculates solar array voltage and current profiles based on user-defined parameters. Profiles can be sequentially sent to power supply, which will emulate defined characteristics. Program offers auto-sequencing through profiles at user-defined intervals, and up to 50 voltage and currents points per curve, with piecewise linear approximation performed between points.

VanDyke Software Inc.    Albuquerque, NM 87111-2873
Dec 28, 2009 Combining terminal emulator with SSH protocol, SecureCRT® v6.5 suits IT professionals requiring solid security, fine-tuned session management, and reliable remote access. File transfer application, SecureFX® v6.5, supports SFTP, FTP over SSL, SCP, and standard FTP. Enabling remote access and file transfer, both Secure Shell clients optimize productivity and usability via UI features such as Windows® 7 compatibility, support for program previews, and ASCII drag-and-drop feature.

Imagination Technologies Ltd    Hertfordshire WD4 8LZ  United Kingdom
Dec 02, 2009 Offering development environment for creation of OpenGL ES 2.0 as well as OpenGL 1.1 and OpenVG applications, POWERVR Insider SDK comprises comprehensive set of utilities, Displacement Mapping and Shadow Mapping training courses, Fur and Coverflow demos, and documentation. PVRShaman graphical shader environment includes built-in models that minimize need to load 3D models for testing shaders, and also supports full blending controls, enabling extensive complex scenes to be prototyped.

GL Communications Inc.    Gaithersburg, MD 20877
Nov 10, 2009 Available with 100 Mbps copper to four 1 Gbps interfaces, IPNetSim(TM) simulates all conditions encountered in real-time, such as network latency, network delay variation, bandwidth congestion, packet loss, and bit errors. Delay times from 1 ms to 10 sec make simulator suitable for satellite delay modeling. Additional features include Bridge or Router modes, command line interface, and remote access via Ethernet management port.

Newport Corp.    Irvine, CA 92606
Oct 22, 2009 With novel detector geometry that splits beam, Oriel IQE-200(TM) permits simultaneous measurements of external quantum efficiency and internal quantum efficiency of solar cells, detectors, or any photon-to-charge converting devices. Instrument combines light source, monochromator, advanced sensor technology, electronics, and software. Oriel QE Commander(TM) software, pre-loaded on PC, controls all components and accessories, providing simultaneous, real-time readout of EQE and IQE.