Ametek Petrolab
Albany, NY 12206
Apr 25, 2008 Using absolute technique that yields results in minutes without requiring reagent calibration, MINIHYD determines water content of crude oil, petroleum products, liquids, gases, and powders. Instrument combines coulometry with Karl Fisher (KF) method to determine water content of samples, and fully automatic operation requires one button push to conduct titration. Product works with Automatically Compensated Errors control system to ensure bias-free results.

Moisture Register Products
La Verne, CA 91750
Nov 08, 2007 Consisting of wall-mounted console, NIR Sensor with power box, or RF sensor with oscillator box, BSP-901 Continuous On-Line System measures moisture from 0-80% ±0.02-0.2% in variety of environments. Single-channel analyzer stores 5 separate 3-point calibration tables for multiple products utilizing nonvolatile battery-backed memory. System reports 7 moisture calculations/sec, while programmable smoothing function minimizes undesired output fluctuations by averaging readings.

Aqua Measure Instrument Co.
La Verne, CA 91750
Oct 22, 2007 Microcontroller-based AM-III performs instantaneous, non-destructive moisture measurements of moving or stationary rolls and stacks of all types of paper and paperboard. Taking 16 measurements every second and displaying average twice in same period, product uses RF capacitance method to obtain pin-less moisture readings below surface of roll or stack. Product is also available with optional 2,000 reading-capacity Data Storage Unit for further processing/reference.

SpectraSensors, Inc.
Houston, TX 77043
Jul 18, 2007 Based on NASA optical technologies, system consists of cell that sample of H2O gas flows through, tunable laser diode (TLD) that emits specific wavelength of light through gas, optical detector, and software to analyze and output results. Unit is not susceptible to aging affects and does not require consumables or scheduled calibration. Capable of instantaneous measurements of trace amounts of H2O gas, analyzer will not become desensitized or drift over time.

Delmhorst Instrument Co.
Towaco, NJ 07082
Jun 14, 2007 Featuring Pin Mode, Scan Mode, and Thermo-hygrometer with RH sensor, TotalCheck enables restoration contractors, IAQ specialists, general contractors, and flooring installers to identify problem areas in all building materials. Integral contact pins mounted on top of meter provide 5/16 in. penetration, and connector accepts external electrodes. Unit supports job groupings and can recall up to 1,400 stored readings on screen, each with date and time stamp.

GOW-MAC Instrument Co.
Bethlehem, PA 18017 8986
Jan 26, 2007 Featuring high signal gain and electro-optical modulation for noise and drift rejection, Series 1400 Analyzer offers sensitivity of 10 ppb for H₂O. Model 1400-A covers 0-2/0-20 ppm, while Model 1400-B covers 0-20/0-200 ppm. Detection is based on spectral emission of argon plasma. Analyzers also offer on-line, continuous trending of moisture concentration with no need for sample injection or separation columns, fast recovery from high moisture levels, and over-range protection.

Kittiwake Developments Ltd
West Sussex BN17 7LU  United Kingdom
Aug 15, 2006 Constructed from stainless steel and protected to IP65 or IP67, ANALEXrs Online Moisture Sensors screw directly into oil flow to detect moisture content of water up to oil's saturation point. With self-diagnosing digital and analog outputs, sensors can be integrated into existing condition monitoring and operating control systems. They communicate with existing systems using industry standard 4-20 mA, RS232, RS485, CAN, and 802.11b WLAN outputs.

Paul N. Gardner Co., Inc.
Pompano Beach, FL 33060 6608
Sep 22, 2005 Skipper Plus can be moved across surface of boat to detect moisture through paint and coatings on wood up to depth of 1.25 in. in non-destructive manner. Product may also be used to detect leaks and trace them to their source. It offers 3 measurement ranges, optimized for testing materials such as hardwood, GRP, and surface moisture. Along with external rubber electrodes, unit features integrated display, Hold function, and high moisture audio warning tone.

Vaisala, Inc.
Woburn, MA 01801 1008
Jul 20, 2004 HUMICAP® MM70 reports measurement as water activity, which indicates margin to free water formation within oil. Probe is compatible with most types of oil and hydraulic fluid and withstands pressure of 150 psig. Operating from rechargeable battery or ac line voltage, meter features menu-based GUI and backlit LCD display. Measurement parameters can be numerically displayed or shown as trend line over time. Data may be logged into memory for download to PC.

Megger
Dallas, TX 75237
Apr 06, 2004 Portable, ac mains-powered, KF-LAB Test Set detects moisture content of insulating oils, primarily within oil-filled transformers and switchgear. Default setting mode is arranged to give correct settings to test moisture content of insulating oils with specific gravity of 0.875. Unit also analyzes other substances with specific gravities between 0.6–1.4. Detection of moisture content helps prevent spontaneous combustion and deterioration of products.

AEMC Instruments
Foxborough, MA 02035
Dec 01, 2003 Model CA847 passes electric current through 2 electrodes to measure impedance variation due to moisture in material. For wood, measurement is expressed as % of H₂O between 6 and 100%. For other construction materials, such as plaster and roughcast, meter determines Wood Moisture Equivalency. Unit features two 20-LED display scales, replaceable electrodes, and auto ON/OFF. Shockproof, dirt-resistant holster is included.

Paul N. Gardner Co., Inc.
Pompano Beach, FL 33060 6608
Nov 12, 2003 Designed for use with concrete and gypsum flooring, CRH meter measures moisture content, relative humidity, temperature, and dew point. Micro controller processes information received, calculates outputs, and shows them on clear, digital display. Non-volatile memory chip stores and retains data, which can be recalled at any time or downloaded to PC for storage and inclusion on spreadsheet or report.

Kernco Instruments Co., Inc.
El Paso, TX 79927 7338
Apr 01, 2003 Model P-2000 electrical resistance type, digital moisture meter features three scales for testing paper stock, cores and corrugated; baled scrap; and 0-100 arbitrary scale. Contact pins mounted on top of meter are used for making direct contact with material. Setpoint with buzzer alerts user when pre-selected percent moisture content has been reached. Moisture Range is 4.3-18% paper; 0-100% arbitrary, and 5-40% baled scrap paper.

Cogiscan, Inc.
Bromont, QC J2L 2N8
Dec 19, 2002 Moisture Sensitive Device (MSD) Control System meets IPC/JEDEC J-STD-033A, which includes revised de-rating table to address environments with humidity rated upwards of 60%. Real-time tracking of moisture sensitive components ensures that components are assembled within specified floor life. System tracks part number, moisture sensitivity level, expiration date/time, body thickness, category, and type. Trays and reels containing MSDs are identified with re-usable RF tags.

GE Measurement & Sensing Technologies / GE Protimeter
Woburn, MA 01801
Aug 05, 2002 Protimeter moisture detection instruments offer LCD or LED displays that detect moisture from fire control, storm, water, or other damage. Instruments include 3-in-1 MMS for assessing moisture levels in air, wood, cement, and tile. Surveymaster SM dual-mode moisture meters use pin electrodes, deep wall probes, or non-invasive Search Mode. Hygromaster instruments use Hygrostick probes to measure relative humidity of wall cavities, floors, and ambient conditions.

Paul N. Gardner Co., Inc.
Pompano Beach, FL 33060 6608
Jun 18, 2002 Accuscan(TM) pinless meter is suitable for use by flooring and restoration contractors, woodworkers, home inspectors, and general contractors. It can be used to identify problem moisture areas in hardwood and tile floors; check moisture levels in concrete during drying process; determine moisture in damaged and non-damaged areas; and ensure that concrete is ready for floor covering. It can also record readings during drying cycle to monitor progress of drying equipment.

MAC Instruments, A Div. Of Machine Applications Corp.
Sandusky, OH 44870
Mar 08, 2002 MAC 150 high temperature moisture analyzer continuously monitors emission stack gases. It meets EPA and local regulatory requirements for 2-point daily calibration check and 3-point linearity check. Unit measures 5 to 25% percent moisture by volume at temperatures up to 2400 deg F, eliminating percent moisture estimates based on wet and dry O2 measurements. Internal calibrator allows automatic calibration checks or in situ recalibration.

Alliance Scale Inc.
Canton, MA 02021
Jan 08, 2002 Compact OHAUS MB45 has infrared halogen heating element with gold reflective housing that reaches 200°C in seconds to begin uniformly drying sample. It has 0.01% to 100% moisture range, 3 preprogrammed test points for automatic test completion, audible signal when test is completed, and allows custom designed test end point criteria. Backlit LCD display shows percent moisture, percent solids, weight, time, temperature and drying curve.