Moisture Register Products
La Verne, CA 91750
Nov 08, 2007 Consisting of wall-mounted console, NIR Sensor with power box, or RF sensor with oscillator box, BSP-901 Continuous On-Line System measures moisture from 0-80% ±0.02-0.2% in variety of environments. Single-channel analyzer stores 5 separate 3-point calibration tables for multiple products utilizing nonvolatile battery-backed memory. System reports 7 moisture calculations/sec, while programmable smoothing function minimizes undesired output fluctuations by averaging readings.

Optek Technology, Inc.
Carrollton, TX 75006-6905
Nov 06, 2007 Available with axial, gull wing, or right angle lead configurations, Series OPB609 sensors consist of 940 nm infrared LED that has maximum forward voltage of 1.7 V and reverse dc voltage of 5 V and NPN silicon phototransistor mounted side-by-side on parallel axes. Units feature 50 mA forward dc current with maximum reverse current of 10 µA and peak forward current of 1 A, 75 mW power dissipation rating, and -25 to +85°C operating temperature range.

Emerson Process Management / Process Liquid Division / Uniloc Division
Irvine, CA 92606
Nov 02, 2007 Featuring plastic-threaded connections, Rosemount® Analytical PERpH-X(TM) 3500 can handle aggressive fouling applications. Double junction AccuGlass pH glass electrode is resistant to thermal and caustic degradation, and removable slotted tip protects glass bulb from direct impacts. Replaceable porous Teflon liquid junction has surface area optimized to maintain steady reference signal, and potassium-chloride-based reference electrolyte is unaffected by thermal/pressure cycling.

Ellis Environmental Group LLC
Acworth, GA 30101
Nov 02, 2007 Release Detection and Remediation Response (RDR2) is used for detecting petroleum leaks of underground storage tanks and fuel lines. Using IR technology and notification system, it provides immediate response to underground hydrocarbon contamination, automatically informs owners about leaks, and starts clean up process. Subsurface metabolism enhancement can be used instantly to allow microbes to consume petroleum contamination leaving only harmless water and carbon dioxide.

Packaging Technologies & Inspection - PTI, LLC
Tuckahoe, NY 10707
Nov 01, 2007 Designed for package integrity testing of filled and sealed food pouches, retort pouches, and pharmaceutical and medical pouches, VeriPac 225 Leak Tester comes with flexible bladder that eliminates any stress on pouch seal during testing cycle. Different size pouches can be placed into testing drawer simultaneously and tested in one test cycle. Unit utilizes ASTM approved vacuum decay leak test method (F2338-05) recognized by FDA as consensus standard for package integrity testing.

Aqua Measure Instrument Co.
La Verne, CA 91750
Oct 22, 2007 Microcontroller-based AM-III performs instantaneous, non-destructive moisture measurements of moving or stationary rolls and stacks of all types of paper and paperboard. Taking 16 measurements every second and displaying average twice in same period, product uses RF capacitance method to obtain pin-less moisture readings below surface of roll or stack. Product is also available with optional 2,000 reading-capacity Data Storage Unit for further processing/reference.

SpectrEcology, LLC
Dunedin, FL 34698
Oct 17, 2007 Embedded in wall of standard 1 cm cuvette, pHuvette is optical pH sensor that traps bromcresol green pH indicator ions in hydrophilic sol-gel cage, and can be used with any spectrophotometer to provide accurate stable measurements of pH of fluid contained in cuvette. Including embedded oxygen sensor, pHoxyvette smart cuvette detects O₂ by using phase fluorimetry to measure fluorescence quenching, while pHoxyvette cuvette comes with both pH and pO₂ sensors.

Mainstream Engineering Corp.
Rockledge, FL 32955
Sep 06, 2007 Developed for HVAC trade as 3 oz aerosolized can with 4 in. long nozzle extension, QwikDectector-HE(TM) can save lives by early detection of leaks due to defects caused by corrosion, expansion/contraction cracks, or manufacturer error that exposes occupants to CO. It penetrates heat exchanger fissure as small as 24/1,000 in. after one 5 sec spray into drilled 1/8 in. furnace plenum hole. Unit pinpoints openings within heat exchanger whether or not they are leaking at time of test.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Aug 30, 2007 Featuring airtight, dust-tight, waterproof design, Series LTS is designed for use where bulk material to be sensed is exposed or open. Units contain SPST, normally closed switch and feature probe activation angle of 25° from vertical. Typical applications include high or low level detection in large hoppers, silos, crushers, or trippers, as well as high level control under stackers, and detection of plugged conditions at conveyor transfer points.

Thermo Fisher Scientific
Waltham, MA 02454
Aug 16, 2007 Suited for electron microscopes, UltraDry offers capabilities that allow for detection of low-energy X-rays down to Beryllium. Clear peak separations in low-energy region facilitate interpretation of spectra and promote confidence in analysis, while X-ray detection performance allows for collection of data at optimized count rates without affecting energy resolution or light element sensitivity. Large-area detector can be coupled with NORAN System SIX and Direct-to-Phase software.

ifm efector, Inc.
Exton, PA 19341
Aug 06, 2007 Suited for production control applications, efector dualis object sensor detects and compares defined shapes and provides up to 5 configurable outputs. Compact 24 Vdc sensor measures 42 x 45 x 54 mm and incorporates 640 x 480 CMOS image processor, image sensor, evaluation electronics, LED display, and infrared LED lighting in die-cast housing. It uses industrial M12 cable assembly for electrical connection and Ethernet cable for software connection.

RLE Technologies
Fort Collins, CO 80524
Aug 01, 2007 Configurable with up to 12 virtual zones, SeaHawk LD5100 determines location of any conductive fluid on up to 5,000 ft of SeaHawk Leak Detection Cable to within ±2 ft. Thresholds for leak, delay, and contamination alarms are adjustable, and solution integrates with existing building/network management systems. After conductive fluid comes in contact with cable or SeaHawk zone spot detectors, system pinpoints location of leaks, annunciates alarm, and displays distance on backlit LCD.

SpectraSensors, Inc.
Houston, TX 77043
Jul 18, 2007 Based on NASA optical technologies, system consists of cell that sample of H2O gas flows through, tunable laser diode (TLD) that emits specific wavelength of light through gas, optical detector, and software to analyze and output results. Unit is not susceptible to aging affects and does not require consumables or scheduled calibration. Capable of instantaneous measurements of trace amounts of H2O gas, analyzer will not become desensitized or drift over time.

Sensonics
Berkhamsted Hertfor HP1 1EF  United Kingdom
Jul 05, 2007 Used to monitor rotating shaft alignment and axial position, PRS05 Senturion Proximity Probe is constructed with bobbin expansion chamber and wire strain relief techniques for high-temperature operation. Construction also includes glass-filled PPS bobbin case, rated to 300°C, resistant to oil and chemicals. Offering 0-5 mm non-contact measurement range in 12 mm tip (M18 body) configuration, probe maintains measurement error of less than 5% over full range.

Rense Instruments
Danbury, CT 06810
Jun 26, 2007 Intended for applications up to 300°F where 5/16 in. diameter stainless steel probe is required, Model HT-748 offers 0-1 Vdc output corresponding to 0-100% RH, as well as separate 0-1 Vdc temperature signal. Unit is available with straight probe, or with 1/8 in. NPT thread or flange for mounting. Remotely mounted in DB25 Sub-D connector at end of cable, electronics are accessible, allowing for recalibration of sensor when required.

Spectrex, Inc.
Cedar Grove, NJ 07009
Jun 22, 2007 SharpEye 20/20SI Triple IR Flame Detector has main section sealed to protect electronics and sensors from moisture during commissioning and maintenance. Modbus protocol is standard for RS-485 output, and microprocessor design allows for field programmability, minimizing false alarms. Factory settings can be updated before installation using PDA or laptop. Optical detector is available in FM and ATEX versions in aluminum or stainless steel housing.

PAR Technology Corp.
New Hartford, NY 13413
Jun 21, 2007 To address need for safe food handling practices among restaurant operators, iQuality(TM) delivers proactive support and enterprise control of HACCP programs. Combination of software, temperature probe, and waterproof handheld device automate capture of checklist data and transmit it to enterprise database. Restaurants can collect critical food safety information across business, streamline regulatory reporting, and reinforce best practices when unsafe conditions are detected.

Autonics USA, Inc.
Vernon Hills, IL 60061
Jun 20, 2007 Offered in wall- or duct-mounted models, THD Series features IP65-rated 72 x 85 mm front panel. Unit provides dual 3-digit LED displays with temperature range of -19.9 to 60°C and humidity range of 0-99.9% RH with accuracy up to ±3% RH. Operating from 24 Vdc, transducer provides variety of outputs including 4-20 mA dc loop powered, 1-5 Vdc signal, or RS485 communication.

Delmhorst Instrument Co.
Towaco, NJ 07082
Jun 14, 2007 Featuring Pin Mode, Scan Mode, and Thermo-hygrometer with RH sensor, TotalCheck enables restoration contractors, IAQ specialists, general contractors, and flooring installers to identify problem areas in all building materials. Integral contact pins mounted on top of meter provide 5/16 in. penetration, and connector accepts external electrodes. Unit supports job groupings and can recall up to 1,400 stored readings on screen, each with date and time stamp.

PerkinElmer, Inc., Optoelectronics Headquarters
Fremont, CA 94538-3180
Jun 12, 2007 Featuring quad-element design, triple-channel DigiPyro(TM) PYQ 2898 has 2 pairs of elements representing 2 channels and additional temperature reference channel. Housed in 3-pin TO-5 package, unit offers 42-bit output direct link. It can be utilized in range of home and industrial motion detection applications including intrusion alarms, motion-activated light switches, and door openers.