Rate Meters

Test & Measuring Instruments

Process Meter detects, converts, and displays input signals.

December 4, 2014

Run as standalone ratemeter or configured as complete control and display system, PM500 has two 4–20 mA sensor inputs that can be scaled to any user-selected units. There are various sensor inputs types, but most common are temperature, speed, and position. Because inputs are independent of each other, meter can be programmed to display 2 different processes. Unit can be powered by 115 or 230 Vac and includes 4-digit display switchable between 2 inputs and communicates via Modbus RS-485. Read More

Test & Measuring Instruments

Digital Panel Meter offers dual counter, dual rate meter.

November 14, 2011

Line one of PAX2D consists of 0.7 in. high, 6-digit LCD that can be programmed to show counters A, B, or C; rate A, B, or C; or high or low values. Second display line is 0.35 in. high, 9-digit, green LCD that can also be programmed for any of line one parameters and accommodates totalizing applications in addition to offering programmable custom unit indicator. Third counter and rate display lets user perform math functions. Capabilities accommodate digital pulse applications. Read More

Test & Measuring Instruments

Digital/Analog Signal Level Meter utilizes embedded MPU.

October 26, 2010

Commonly used for QAM, handheld model 2007 includes functions for MER, BER, constellation, channel, carrier noise ratio, and rail voltage testing. When conducting DTV channel measurement, portable and rugged unit operates at 5-862 MHz, provides DVB-C/ITU-T and J.83-AnnexA/B/C tuning modes, and also features adjustable bandwidth. During analog TV channel measurement mode, it offers 25-120 dBuV measurement range and ±1.5 dB accuracy. Read More

Test & Measuring Instruments

Ratemeter with Slowdown Test verifies setpoint relays.

September 29, 2010

While used to display automated system's production rate or time in process, TR400 ratemeter also offers system slowdown test to verify relay setpoints and operation. Slowdown test, performed within seconds, lets users periodically test setpoints while system is functioning normally, with no need for system recalibration. Product displays rate or time in process by detecting and converting 0.01-10,000 Hz signal input and is available with single- or quadrature-signal decoding. Read More

Test & Measuring Instruments

Multifunctional Tachometer delivers accuracies down to 0.1%.

August 6, 2010

Used to measure and display rotational speed of saw blades, grinders, engines, motors, and conveyor belts, Series TAC3 enhances operation via ergonomic design that provides direct line-of-sight viewing of display and target. This 32-function tachometer/ratemeter, totalizer/counter, and timer integrates 5-digit alphanumeric dual LCD that displays on-target, continuous measurement, laser, and low battery indication. Measurements of up to 999,999 can be viewed with on-screen multiplier. Read More

Test & Measuring Instruments

Dual Rate Meter concurrently monitors 2 signal inputs.

October 13, 2009

As 5-digit dual rate indicator and 6-digit dual totalizer, PAXDR provides real-time viewing of dual input rates paired with math functions to measure and display sum, difference, ratio, draw, or percentage of total between 2 rates. Six values are viewable on .56 in. LED display: one each for rates A/B, totalizers for A/B, and rate and totalizer for calculation C. Users can also select desired scale for each of 2 signal inputs using programmable function keys, with independent scaling. Read More

Test & Measuring Instruments

Ratemeter/Totalizer includes setup and monitoring software.

February 17, 2004

Model BATRT-M features 5 digits of rate and 8 digits of total. Instrument can be powered from internal battery, external DC supply, or 4-20 mA output loop, and accepts magnetic pickup, DC pulse, and switch-closure inputs. Software lets users create, save, open, download, upload, and print setup information for instrument, as well as view rate and total on PC. BATRT-M is rated for -22 to +158°F operation with accuracy of 0.01% of reading ±1 count. Read More

Test & Measuring Instruments, Timers & Clocks

Process Time Indicator can be configured as ratemeter.

July 16, 2003

Model 877X indicates process time of continuous processes. Sensor or encoder provides pulses for unit to monitor. Time between pulses is measured, and internal calculations are made to apply appropriate scaling factor, enabling unit to indicate actual time taken for items to travel through process. Unit has bright LED display and is available in ac- and dc-powered versions. Dual relay output, analog output, and RS-485 communications are optional. Read More

  • 1