Test & Measuring Instruments ->
(Showing headlines 1 - 8)
Tension Indicator provides 24 V alarm output.
Gorham, ME 04038
Nov 08, 2011
Offering either single or multiple tension zone monitoring, Model i4-HD can be supplied with analog or LCD digital meter displays. Unit provides excitation voltage as well as zero and calibration circuitry. Output can interface with PLC, PC, or DC/AC or servo drives. Compatible with most semiconductor strain gauge and foil gauge load cells, Model i4-HD delivers accurate and repeatable web tension.
Tension Measurement Device targets pre-stressed wire/cable.
Applied Measurements Limited
Aldermaston, Berkshire RG7 8PN United Kingdom
Mar 15, 2010
Digiforce noncontact tension measurement device is battery-powered, handheld instrument that measures tensile forces via magnetic sensor once wire or cable is struck with included mallet. Frequencies of 3-70 Hz are used to measure vibrations, while software processes only frequencies of interest that contribute to measurement. On-board data logging, LCD, and RS232 port/USB converter for downloads to host PC are included. System operates in temperatures from -10 to +50°C.
Tension Indicators feature compact, general-purpose design.
Dover Flexo Electronics, Inc.
Rochester, NH 03867
Oct 29, 2009
Powered by 24 Vdc, EasyView tension indicators amplify web tension signal from transducers installed in machine's web path. Web tension amplifier displays tension reading on analog or digital meter, while supplying isolated 0-to-10 Vdc tension signal output to PLC, drive, or controller. Zero and calibration settings are stored digitally, allowing stable and drift-free output over time and temperature variations. Full enclosure and open panel mount versions are available.
Tension Ties and Tools have self-locking cable tie design.
Tinley Park, IL 60477 3091
Oct 25, 2007
Suited for fastening of armored cable, pipe, tubing, conduit, and rubber boots, PAN-STEEL® Stainless Steel Retained Tension Ties and Tools deliver secure fastening solution for mechanical applications. They come in standard, light heavy, and heavy cross sections with 2 design options. Clamp design (MRT series) offers tight fastening of rigid materials in high vibration and harsh environments. For fluid applications, 360° seal design (MRS series) eliminates gaps under head of tie.
Tensioning Device aids installation of cable-pull switches.
Tarrytown, NY 10591
Feb 01, 2007
Designed to speed installation of emergency cable-pull switches, Series S900 features on-board wire clamp and anti-slip design to minimize need for readjustments. It requires only single tool to secure wire clamp and for adjustment of tension screw. Unit includes C hook, which slips onto ring of cable-pull switch. Should switch need to be replaced, Series S900 can be removed from switch by releasing tension.
Digital Meter measures cable tension.
Dillon, Inc., A Div. Of Avery Weigh-Tronix
Fairmont, MN 56031-1439
Nov 15, 2005
Quick-Check Tension Meter incorporates loadcell with LCD display that instantly calculates tension of guy wires, overhead wires, and elevator cables. With sheaves that accommodate rated wire sizes of 3/16-¾ in., lever-operated meter does not require manual calculation, lookup tables, or conversion charts and is available in 2 tension capacities up to 8,000 lb/35 kN/3,500 kg. Handheld unit offers on-board storage for up to 15 calibrations.
Test Kit measures dyne levels.
ADM Tronics Unlimited, Inc.
Northvale, NJ 07647 1904
May 20, 2005 Surface Energy Test Kit, VU-DYNE allows user to determine dyne levels of any film or substrate surface. Indicator solutions in kit are those commonly used for ink, coating, and adhesive wettability tests on films, especially for water-based products. Kit includes test board, test sheet, 2 wire-wound draw-down rods, 6 bottles of VU-Dyne Indicator Solution, and 6 dropper bottles.
Tension-Measurement System combines load cell and indicator.
Transducer Techniques, Inc.
Temecula, CA 92590
Apr 04, 2003 TLL Tension Load Cell and PHM-100 Portable Hand-Held Transducer Indicator system is for industrial and OEM force measurement and weighing applications. PHM-100 has Peak Hold feature that captures at less than 1 msec and operates on 9 V battery for 60 hr. Inline TLL is constructed from stainless and offered in ranges from 5,000 to 50,000 lb.
(Showing headlines 1 - 8)
Latest Products in the News
U.S. Products Headquarters - December 5, 2013
Extractor Is Powerful, Yet Cost Effective
Crown Mats and Matting - December 5, 2013
Matting Helps Protect Gym Floors
Federal Mfg. - December 5, 2013
M.G. Newell, One of the Leading Sanitary-Process-Equipment Distributors in the United Sates, Now Sells, Integrates, and Supports Federal Mfg. Filling and Capping Systems
Future Electronics - December 5, 2013
Future Electronics and NKK Switches Offer Free Samples
Aerotech, Inc. - December 5, 2013
Npaq 6U High-Power Drive Rack Provides up to 30 A for Brush, Brushless or Stepper Motors
Vacon Inc. - December 5, 2013
Vacon Enters the Medium-Voltage AC Drives Market
CAS DataLoggers - December 4, 2013
Nitriding Process Temperature Trending Using a Data Logger
Labthink International,Inc. - December 4, 2013
Medical Blister Leak Test -- Performed by i-Leaktek 6600 Leak and Seal Strength Tester
Centrify Corp. - December 4, 2013
Centrify Server Suite Achieves Common Criteria Certification
OKW Enclosures, Inc. - December 4, 2013
More Battery Compartment Enclosures From OKW
More Products in the News...