Load & Force & Torque Indicators

Test & Measuring Instruments, Sensors, Monitors & Transducers

Weighing/Force Instruments feature built-in web server.

February 4, 2016

Offering intuitive operation and advanced diagnostics, BLH Nobel G5 Instruments support process weighing and control, force measurement, factory automation, high dynamic force measurement, and high-speed batching/blending systems. Panel-mount version provides 24 Vdc or 115/230 Vac operation, while rail-mount model offers 24 Vdc operation only. Instruments support Modbus/TCP, Ethernet/IP, FTP, HTTP, Profibus, DeviceNet, ControlNet, and Modbus RTU interfaces as well as RS485 and analog outputs. Read More

Test & Measuring Instruments, Controls & Controllers

Load Moment Indicators provide graphic display of crane info.

October 19, 2015

Equipped with 4.3 in. and 7 in. color display, respectively, qSCALE I2  and qSCALE I3 provide operators with graphic display of crane's current load and geometric information, including actual and allowable load, boom length, boom angle, and load radius. Console was designed with IP66/67 protection rating which is suitable for use in both non-cab and in-cab applications. Setup of crane parameters and LMI functions is done through Configuration Tool. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Force Measurement Indicators provide 24-bit resolution.

August 5, 2015

Suitable for automatic as well non-automatic applications, Type 1020-FMD Indicators offer measurement speed of 1,600 conversions/sec, supporting static and dynamic force measurement as well as destructive material tests. Units feature zero adjustment, track recording, hold/peak, hold/valley, hold, and overload protection. All are provided with USB to facilitate setup and backup functions. Available as panel meter or in stainless steel enclosure, indicators display force via 2.8 in. TFT screen. Read More

Test & Measuring Instruments

Wireless Indicator features multi-sensor design.

August 4, 2015

Designed to optimize productivity in lifting applications, iSCOUT PRS90 features 4.3 in. color graphic display with user-friendly navigation, enabling operator to set limits and modify sensor configurations. System's flexible design allows for monitoring single or up to 8 sensors including combinations of load, anti-two block, boom angle, and wind speed. With IP 66/67 rating, console can be mounted either inside or outside of cab. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Tension/Compression Force Tester is motorized and configurable.

April 13, 2015

Engineered on modular function platform, ESM303 single-column force tester is suitable for tension and compression measurement applications up to 300 lbF in laboratory and production environments. Single- and double-column extensions address larger sample application requirements, and FollowMe™ function facilitates test setup via hand-activated, force-based positioning. Test methods may be configured through control panel, and up to 50 test profiles can be saved by user. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Force Measuring Device targets machine tool clamping systems.

May 28, 2014

Designed to measure pull-in force of machine tool clamping systems, F-senso Device can detect changes in force before they affect machining quality. Product is engineered for use with clamping systems for smaller tool shanks, including HSK A 25, A 32, and A 40 as well as steep taper SK [CAT/BT 30. Fitted with adapters for HSK or steep taper shanks, F-senso is pulled into spindle taper of machine tool and provides exact measure of pull-in force, covering range of 0–3,370 lb. Read More

Test & Measuring Instruments, Material Handling & Storage, Controls & Controllers, Machinery & Machining Tools, Sensors, Monitors & Transducers, Mechanical Power Transmission

In-Line Tensioner suits die cutting and tube manufacturing.

February 14, 2014

Utilizing CD Series Brake, i4 Tension Indicator, and pair of ES-LR Live Roller Load Cells, custom In-Line Tensioner System enables operators to manually adjust output to brake to create exact desired tension level based on precise tension feedback provided from load cells displayed on indicator. This eliminates guesswork in adjusting tension by touching web. Automatic version utilizing S4 Closed Loop Tension Controller is also available. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Digital Force/Torque Indicator offers sophisticated functions.

August 16, 2013

Offering functions for tension, compression, and torque measurement requirements, Model 7i interfaces with Plug & Test™ remote sensors. All calibration and configuration data is saved within sensors' smart connectors, allowing interchangeability. Respectively, max capacities for force and torque sensors are 10,000 lbF and 5,000 lbFin. Sampling rate is 14,000 Hz, memory stores up to 5,000 readings, and user-defined unit of measurement can be configured for special applications. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Medical Handgrip Dynamometer features digital display.

July 17, 2013

Constructed with lightweight molded body, microFET utilizes precision electronic load cells to eliminate possibility of oil leakage that can occur with hydraulic units. Bluetooth technology allows for wireless use with clinical or data collection research software to optimize accuracy and accessibility. Read More

Test & Measuring Instruments, Machinery & Machining Tools, Sensors, Monitors & Transducers

General Peeling Jig measures lid strength.

July 16, 2013

Designed to measure force required to peel lid off sealed container, Model TA-GPJ can be adjusted to remove lid at 0, 45, or 90°. General Peeling Jig is suited for variety of applications, including foods and beverages, dairy products, and pharmaceuticals. Stand-alone CT3 Tester, operating in both compression and tension modes, uses TexturePro CT software to automate test procedures and generate valuable analytical data. Read More

Test & Measuring Instruments

Pull-Off Testers store complete record of test.

February 14, 2013

Designed to facilitate operation, DY-2 pull-off testers have integrated, feedback-controlled motor and provide fully automated test at constant load rate. Load rate and all test results required by application are recorded to ensure standards compliance, and mode of failure can be recorded along with test result. Suited for field testing applications, portable testers offer automatic calculation of bond strength as well as DY-Link software for complete reporting of load rate. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Handheld Force Gauge includes diverse measurement information.

November 13, 2012

Suited for ergonomists, engineers, and other industry professionals, ergoFET push pull force gauge includes measurement information that improves data collection for ergonomic and engineering assessments. Supplementing standard output measurements, included information covers average force of test and sustained force. Instrument can measure force up to 300 lb from multiple directions at once, features LCD windows with brightness control, and can hold up to 30 tests. Read More

Test & Measuring Instruments, Material Handling & Storage, Sensors, Monitors & Transducers

Ultrasonic Monitoring Device meets bolting professionals' needs.

August 13, 2012

Equipped with display featuring 2.4 x 1.8 in. viewable area, BoltScope Pro can measure bolt load, elongation, stress, and percentage of strain at nanosecond intervals with ±0.00001 in. resolution. Loaded and unloaded bolt readings can be compared instantly, and as many as 8,000 readings can be stored in multiple groups for detailed comparisons. Also, battery-powered unit can be configured for linear regression or vector readings to assist load measurement optimization. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Programmable Universal Force Tester offers PC control.

June 22, 2012

Accommodating diverse applications in medical device, packaging, automotive, and other industries, ESM301 test stand v2 offers 300 lbf capacity, overload protection, and PC control. Latter lets user control stand via custom program or legacy Nexygen(TM) TCD software. Modular mechanical design allows frame to be separated from controller for custom mounting applications, and feature configuration platform enables selection of individual functions. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Wire Terminal Pull Tester accommodates up to 0.25 in. samples.

March 2, 2012

Applying up to 200 lbf, Model WT3-200 measures pull-off force of wire and tube terminations. Backlit graphic LCD displays real-time force, peak force, and programmable pass/fail limits. Data can be transferred to PC or other data collector via USB, RS-232, Mitutoyo, or analog outputs. Able to store 1,000 readings and calculate statistics, tester includes break detection feature that can be configured to automatically output data, store data, and zero display upon sample break. Read More

Test & Measuring Instruments, Robotics, Sensors, Monitors & Transducers

Pick-and-Place Machine measures placing force.

February 1, 2012

Available as option on FLX2011 Series machines, placing force measurement system consists of chuck where actual placement takes place. Chuck allows for processing of substrates such as PCBs with max size of 200 x 200 x 3 mm. By means of software plug-in, actual placement force from 0-5 N ±0.5 N can be predefined. Spring characteristic is calibrated for each nozzle and data is stored in database. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Tension Indicator provides 24 V alarm output.

November 8, 2011

Offering either single or multiple tension zone monitoring, Model i4-HD can be supplied with analog or LCD digital meter displays. Unit provides excitation voltage as well as zero and calibration circuitry. Output can interface with PLC, PC, or DC/AC or servo drives. Compatible with most semiconductor strain gauge and foil gauge load cells, Model i4-HD delivers accurate and repeatable web tension. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Digital Force/Torque Indicators have interchangeable sensors.

October 6, 2011

Models 5i and 3i, featuring backlit graphic LCDs and Plug and Test(TM) technology, save all calibration and configuration data within sensors' smart connectors. Force sensors are available in capacities up to 10,000 lbf, and torque sensors are available in capacities up to 5,000 lbf-in. At up to 7,000 Hz, Indicator sampling rates enable accurate results for quick-action tests. Data can be transferred to PC or data collectors via USB, RS-232, Mitutoyo, or analog outputs. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Hand Force Measuring System helps assess occupational safety.

April 29, 2011

Type 9809A hand force measuring system is designed for short- and long-term assessments of biomechanical forces, loads, or applied stresses to objects or machines. System features 2 hand force measuring handles with charge amplifiers, as well as USB interface, datalogger with CompactFlash card, DAQ system, software, and cables. Included multi-component piezoelectric force transducer offers dynamic measurements in 3 orthogonal directions. Unit requires laptop PC with USB port for operation. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Compact Digital Force Gauges feature wide capacity range.

March 11, 2011

With capacities from 0.12-500 lb, sampling rate of 2,000 Hz, and accuracy of better than ±0.3% FS, Series 3 is designed for tension and compression force testing in QC, manufacturing, and R/D areas. Product integrates backlit graphic display and accommodates data output to PC via USB. Overload protected to 150% of capacity, handheld or test stand/fixture-mounted devices measure 2.5 x 3.9 x 1.5 in. and come with MESUR(TM) Lite basic data collection software for data tabulation/exporting. Read More