Transducers USA    Elk Grove Village, IL 60007
Jun 03, 2013 Measuring 1.8 x 1.5 x 1.0 in., matchbook-sized Model TRPS-07 is suitable for products whose sound output level needs to override any other sounds within area. Unit operates from 12 Vdc at 130 mA, producing sound at frequency of 2,500 ±500 Hz. Supplied in rugged ABS package with wire leaded input, sounder operates from -20 to +60°C.

LCM Systems Ltd.    Isle of Wight PO30 5GY  United Kingdom
Apr 29, 2013 Intended for crane, lifting, and hoisting applications, IP65-sealed Large Digit Display indicators come in 4- or 6-digit versions with digit heights from 57–400 mm that can be viewed from respective distances of 25–200 m. LD-Process is suitable for process analog current and voltage signals, LD-Strain is intended for use with strain gauge-based sensors, and LD-Serial is used as slave display with connection by RS232 or RS485 interfaces. Analog, relay, or digital outputs are available.

LEDtronics, Inc.    Torrance, CA 90505
Apr 01, 2013 RPLH 22 and 30 mm industrial control pilot lights turn off below 50 Vdc, eliminating false condition readings on status indication panels. Comprising lens, lamp, and lamp holder, these direct incandescent replacements feature T3¼ (9 mm) single-contact miniature bayonet bases. All LED light output colors – 650 nm red, 610 nm amber, 596 nm yellow, 519 nm green, 462 nm blue – and 8000K white are sunlight visible, and LED lamp assemblies are rated for 130 Vdc/120 Vac input.

SKF USA, Inc.    Lansdale, PA 19446
Nov 15, 2012 Designed for rotating machinery with constant operating conditions, SKF Machine Condition Indicator periodically makes velocity measurements to keep track of overall machine health and highlight potential problems relating to misalignment and imbalance. Enveloped acceleration measurements are used to detect possible bearing degradation. In addition, device monitors machine operating temperature. Built-in intelligence enables measurement evaluations and helps avoid false alarms.

Patlite (USA) Corporation    Torrance, CA 90501
Aug 20, 2012 Measuring 2.95 x 2.95 x 0.78 in., BSV Series offers user-selectable volume control from 0-87 dB at 1 m to satisfy range of application requirements. Audible indicators come with 15 pre-loaded and user-selectable alarm and chime-style sounds. Users can also program each unit with up to 15 original messages or sounds in MP3 format (up to 63 sec total) with proprietary SD card. Dark gray, off-white, and silver versions are available to provide integrated appearance.

Banner Engineering Corp.    Minneapolis, MN 55441
Jul 30, 2012 Employing EZ-LIGHT® technology and highly-visible LEDs, S18L general-purpose indicator can be used stand-alone on machine or enclosed in panel. Each unit features up to 3 independent colors; there are multiple colors to choose from for custom-colored indication. To avoid false indication, product's face appears gray when not in operation. Indicator comes in IP69K housing, withstands harsh washdown environments, and is available for mounting with various brackets.

LPS Technology, LLC    New Jersey, NJ 07481
May 17, 2012 Attached between electronic device charger and wall socket, PERCH helps remind users to take chargers with them. When portable device, such as mobile phone or laptop, is connected to corresponding charger, PERCH automatically activates and begins silently watching wires. When device is unplugged from charger, PERCH chirps distinctive, unobtrusive sound. Alarm can be silenced with push of button if it is not yet time to unplug charger and relocate.

Pfannenberg    Lancaster, NY 14086
Apr 17, 2012 Constructed with UV-resistant and flame-retardant polycarbonate/ABS housing and xenon strobe flash tube, 105 dB(A) PATROL Series PA X 5 features IP66-rated seal against dust and liquids. Users can select from 80 tones including continuous, sweeping, alternating, pulsing, and interrupted as well as simulated bells, sirens, and whoops that meet international standards. Available with 5 or 10 Joule flash energy, strobe provides noticeable level of alarming to suit required area of coverage.

Pfannenberg    Lancaster, NY 14086
Feb 20, 2012 While conforming to SIL 1 and SIL 2 requirements, Model DS 10-SIL has 110 dB(A) SPL output and cast aluminum housing. It provides dependable signaling on machinery and heavy equipment in industrial environments. Self-monitoring circuitry and fault-indicating contact closures alert of failure or initiate shut down/lock out of machinery until corrective action can be achieved. Additional features include menu of 32 unique alarm tones and ability to remotely trigger up to 4 selected tones.

Lumex Inc.    Carol Stream, IL 60188
Feb 01, 2012 Eliminating need for AC-to-DC power conversion, QuasarBrite 120 Vac LED comes in round configuration with 7 mm diameter, and can be customized with wire lengths from 6 in. to 6 ft. RoHS-compliant unit is available in blue, white, red, yellow, and green. Typical applications include green energy technology such as monitors on solar panels; industrial control, such as flow meters; commercial appliances; and communications equipment, including network routers and video servers.

Pfannenberg    Lancaster, NY 14086
Dec 15, 2011 Safety Integrity Level (SIL) audible and visual signaling devices utilize self-monitoring circuitry and fault-indicating contact closures to alert of failure or initiate shut down/lock out of machinery until corrective action can be achieved. With full statistical data supporting conformity to SIL 1 and SIL 2 requirements, products provide safety engineers with solutions for fulfilling their Safety Instrumented System (SIS) requirements.

Safety Technology International    Waterford, MI 48327
May 12, 2011 Designed to prevent unauthorized use of fire or emergency doors, Wireless Exit Stopper® utilizes local alarm to transmit signal to receiver, alerting that site has been triggered. System emits 95 or 105 dB alarm for 30 sec, 3 min, or continuously when activated and sends radio signal to receiver up to 1,000 ft. In annunciator mode, system announces door entry with set of 10 beeps and then resets. When used in alarm mode, key operated override will silence alarm and allow authorized exits.

Floyd Bell, Inc.    Columbus, OH 43085
May 11, 2011 Measuring approximately 1 x 1 in., Twin Turbo(TM) Lighted Alarm consists of panel-mount piezoelectric audio alert that also emits daylight-viewable red light when activated. Sound output, available in 7 tone types, measures up to 103 dB at 2 ft, and illuminated enclosure creates halo design that results in 180º dispersion. Supplied in polycarbonate plastic casing, tamper-proof multisensory device is rated IP68 and operates from 9-30 Vdc while drawing 50-110 mA.

CSI Controls    Ashland, OH 44805
Mar 08, 2011 Designed to mount on 4 in. electrical conduit, AlarmBot(TM) outdoor post alarm features factory-sealed weatherproof enclosure that helps prevent gases and moisture from entering system. As level in tank rises to activate high water alarm float, clear beacon illuminates 360° by 4 alternating red flashing LEDs and 95 dBA audible alarm sounds. Alarm can be silenced using on/test/silence switch. Operating on 12 V, pump and alarm power can be separated.

Detcon, Inc.    The Woodlands, TX 77387 8067
Dec 20, 2010 Using standard SmartWireless(TM) battery packs, Models SW-AV1-DV1 and SW-AV1-DV2 operate continuously in full alarm condition for up to 6 hours. Units have 2 alarm levels with relay options that include adjustable set points and latching/non-latching relays. Alarm Level 1 activates strobe and Alarm Level 2 initiates audible warning device. When communicating via RXT-320 transceiver, Alarm Level 2 can be configured for acknowledge/silence via operator interface at SmartWireless(TM) HMI display panel.

Federal Signal Corp., Signal Div./Electrical Products    University Park, IL 60466
Nov 15, 2010 Employing 60,000 hr LED light source and buzzer that outputs 85 dB at 10 ft, AV1-LED is available with amber, blue, green, red, and clear domes. Black base accommodates mounting of ½ in. NPT pipe, 4 in. octagonal electrical box, or any flat surface, and 100% polycarbonate housing is rated for Type 3R rain-tight applications. Capable of supplying independent flashing light and sounder operation, product allows LED to be field-adjusted for flash pattern of 60 or 75 FPM.

Grace Engineered Products, Inc.    Davenport, IA 52807
Sep 27, 2010 Respectively suited for 2-15 kV and 15-43 kV applications, VoltageVision® R-1VH and R1VL provide safety for workers performing mechanical or electrical maintenance on medium voltage equipment by helping to ensure isolation of electrical energy. Products utilize capacitive coupling with earth ground to complete flashing circuit as well as provide surge immunity and electrical installation integrity. Amount of energy transferred to indicator determines flash rate and intensity.

CUI, Inc.    Tualatin, OR 97062
Sep 07, 2010 Supplied in 5 x 5 mm SMT package, CSS-05 series uses magnetic technology and has rated voltage of 3 V and rated frequency of 4,000 Hz. Sound pressure level options range from 75-78 dB, operating temperature range is -30 to +70°C, and three configurations are available. Models CSS-0575A, CSS-0575B, and CSS-0578 suit mobile equipment applications where board space is of concern, such as handheld scanners, glucose monitors, and GPS devices.

Safety Technology International    Waterford, MI 48327
Aug 09, 2010 Featuring 140° x 40 ft detection zone, Model STI-46100 plays music while informing user that someone has entered area. Motion sensor is mounted on wall and receiver is plugged into any electrical outlet within operating range. Switch enables users to select alarm or 13 different sounds. Suitable for indoor or outdoor use, battery-powered chime offers 32 individual privacy codes to protect against outside interference.

European Safety Systems Ltd    Acton, London London W3 7QH  United Kingdom
Aug 03, 2010 Certified II 1G Ex ia IIB T4/5/6 for use in Zones 0, 1, and 2, IS-pA1 panel mount sounder is suited for use as fault indication or process alarm on control panels located in intrinsically safe environments. It produces 100 dBA at 1 m continuous 2,600 Hz tone that can be pulsed externally to produce different signals. To reinforce audible warning signal, IS-pB1 panel lights can be included that can be mounted behind red, amber, green, blue, or clear lenses.