Test & Measuring Instruments ->
(Showing headlines 301 - 320) << 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 ...
RF Digital Indicator offers Ethernet and relay options.
Measurement Systems International, Inc. (MSI)
Seattle, WA 98168 4660
Dec 31, 2008
Model MSI-9850 is available with Ethernet option, offered as hardwired 10/100Base-T or wireless 802.11b network interface, that enables direct connection between CellScale Network and PC, corporate network, or Internet. Communication with scales/sensors is accomplished via TCP protocol. Also available, relay option provides up to 8 set point outputs for direct interface with peripheral devices. Coil and solid-state relay types are available in isolated and shared power modes.
Hospital Bed Inclinometers promote healing.
Sun Co., Inc.
Arvada, CO 80004
Dec 22, 2008
Measuring 2.75 x 1.65 x 0.45 in., Lev-o-gage® HL and Lev-o-gage® HR mount on left, right, or both sides of hospital bed, allowing hospital staff to adjust bed's angle to exact degree of incline to speed healing, prevent bed sores, and optimize patient comfort. Indicator tube is made of unbreakable clear polymer, while housing is made of high-impact ABS plastic. Numerals and hashmarks are engraved in black housing and paint-filled in white for easy reading.
Oxygen Flowmeter enables in-line oxygen level monitoring.
Edgewood, NY 11717 8329
Dec 18, 2008
Oxyview polycarbonate oxygen flow meter (Part #11067), compatible with most oxygen bushings, is calibrated indicator gauge that provides in-line monitoring of oxygen levels from 1 to 6+ liters/min. Ability to connect close to patient in any orientation offers alternative to gravity fed components mounted at oxygen source.
Radar Altimeter is TSO certified.
Waco, TX 76706-3756
Dec 12, 2008
Featuring remote unit and dual antennas, RA-4500 delivers precise altitude above-ground-level (AGL) information from 0-2,000 ft. Equipped with standard ARINC 429 digital interface, real-time system provides enhanced situational awareness and operational safety when flying close to the ground, approaches, night time operations, and flying over irregular terrain.
Fiber Optical Power Meter has 800-1,600 nm wavelength range.
GAO Tek Inc.
Toronto M1B2K4 Canada
Dec 10, 2008
Model GAO 800 Optical Power Meter provides 850, 980, 1,310, 1,550 nm wavelength calibration points to allow linear and non-linear tests. It features 100 memory locations, LCD with backlit display, and adapter that supports 2.5 mm port (FC,ST, SC) or 1.25 mm port (LC, MU). Unit performs relative power test in units of dB µW, dB and dBm; multi wavelength test; and absolute power test in units of dBm or µW. Working temperature is 0-40şC.
Alarm Annunciator can be set to any common ISA sequences.
Dwyer Instruments, Inc.
Michigan City, IN 46361
Dec 03, 2008
Providing visible and audible alarms for up to 8 inputs, Series AN2 Indicating Alarm Annunciator also has 2 SPDT relay outputs that can be used to initiate external alarms, buzzers, or paging devices. Integral 24 Vdc power supply can power most level, temperature, pressure, or flow switches. Using front panel push buttons or rear terminal block, audible alarm conditions can be acknowledged, reset, or silenced.
Line Voltage Monitor protects single-phase equipment.
Cicero, NY 13039
Dec 02, 2008
Featuring backlit digital display, Model ICM492 protects single-phase equipment against low and high voltage conditions and rapid short-cycling. Device continuously checks incoming line voltage for faults and displays RMS voltage. Response time on fault condition can be fine-tuned to minimize nuisance trips. Additional features include adjustable anti-short cycle time delay, control mode, universal line voltage input, and heavy-duty SPDT relay output.
Digital Clamp Meter registers power levels up to 600 kW.
Protek Test & Measurement
Englewood, NJ 07631
Nov 21, 2008
Offering true, reactive, and apparent power measurements, 3-phase, digital power Clamp Meter measures 3-phase 3-wire, 3-phase 4-wire, and single-phase circuits to 600 V at 1,000 A. Its 10,000 count, 4-digit dual LCD shows selected power measurement and stores up to 28 of them in memory. Featuring 2 in. jaw opening, device can measure volts, amps, kilowatts, VA, VARs, KWh, power factor, and frequency. Unit includes RS232 interface and tool box carrying case.
Indicators display humidity, temperature, and dew point.
Rotronic Instrument Corp.
Hauppauge, NY 11788
Nov 21, 2008
Utilizing AirChip3000 technology, portable HygroPalm2 Series provides humidity and temperature measurements with reliability of ±0.8 RH and ±0.1°C. Available with integrated or interchangeable probes, handheld units are suited for applications where exact measurement of humidity and temperature is of decisive importance. Instruments can be used to spot check HVAC installations, manufacturing and storage areas, food and pharmaceutical industries, and healthcare industry.
Tester determines passivation of stainless steel.
Koslow Scientific Co.
Englewood, NJ 07631
Nov 19, 2008
With no size limitation to test piece, Model 2026 Passivation Tester measures corrosion tendency of stainless steel surfaces. Unit detects surface free iron through galvanic process, which is measured as voltage. Measurement can be repeated over surface of test part and at sensitive spots, such as seams and welds. In addition to all chromium containing stainless steels, Model 2026 is suited for use with precipitation-hardened steels such as 17-4, 15-5, and 17-7.
Data Logger facilitates environmental monitoring.
Addison, IL 60101-4917
Nov 18, 2008
Multi-feature Digital Display Temperature and Humidity Data Logger Model SP425 features push-to-start and push-to-stop functions that help prevent unnecessary readings from getting mixed in with pertinent data. Digital displays let users keep track of temperature and humidity conditions between data downloads, and options are available for displaying current or min/max readings. Other features include user-replaceable battery and USB-enabled data downloading.
Corrosion Monitoring System provides online operation.
Rohrback Cosasco Systems
Santa Fe Springs, CA 90670
Nov 13, 2008
Suited for small scale systems or as building block to full ICMS3 Corrosion Management System, Intelligent Interface Unit provides real-time corrosion rates, erosion rates, and pitting tendency in water systems. System integrates RCS digital Microcor, Quicksand, and Corrater corrosion monitoring transmitters to or through SCADA or DCS system. With Symantec PC Anywhere or Microsoft remote desktop, users can access data systems for configuration and graphical interface remotely.
Pressure Indicator has input accuracy of ±0.1% at 0.1 sec.
South Bend, IN 46628
Oct 30, 2008
Housed in 60 mm deep NEMA 4X rated case with 4.5 digit LED display, model PG500 can interface with strain gauge type pressure sensor and any manufacturer's pressure transducer. It features digital inputs including hold reset, alarm interlock reset, and auto zero, with option of up to 4 digital outputs for alarms, analog retransmission output, and RS422-A/RS-485, ANSI or MODBUS protocol. Available in 1/8 DIN horizontal, product suits extrusion or gear pump applications.
Output Power Monitor IC features digital I2C interface.
International Rectifier Corp.
El Segundo, CA 90245
Oct 30, 2008
Based on TruePower(TM) technology, Model IR3720 monitors output filter inductor current in buck or multiphase converters from 0.5-1.8 V with 3.3% power accuracy and ±0.75% voltage accuracy. Output current or voltage is communicated to system controller through digital I2C interface to provide effective power management. Device provides designers with option of using resistive sensing or inductor DCR current sensing with internal thermal compensation feature.
Indicator Lights comes in audible or multi-segment versions.
Banner Engineering Corp.
Minneapolis, MN 55441
Oct 28, 2008
Compatible with PLC or other logic-level control outputs, EZ-LIGHT(TM) Audible and Segmented Indicator Lights feature color LEDs for operator guidance and equipment status indication. Audible styles offer 2 decibel levels, with steady or pulsed tones, in addition to standard Green/Red/Yellow lights. Segmented styles provide up to 4-color display, with individual segments lighted separately or in combination. Both versions feature PNP or NPN input types and Euro-style quick-disconnects.
Moisture Meter allows building inspection in dark spaces.
Paul N. Gardner Co., Inc.
Pompano Beach, FL 33060 6608
Oct 23, 2008
TechCheck features backlit display, adjustable alarm indicating when preselected moisture threshold is reached, and hold feature. Moisture measurement modes include pin mode with 5-60% MC wood scale, and scan mode with 0-300 numerical reference scale. Ruggedly constructed device includes 9 V battery and auto shutoff timer that optimizes battery life. Unit is suited for wall and floor coverings, wood, and dry wall applications.
Audible Alarm facilitates condition differentiation.
Patlite (USA) Corporation
Torrance, CA 90501
Oct 23, 2008
Able to play up to 32 built-in sounds for signaling/identifying different conditions, BD series produces 90 dB output to ensure audibility. Sounds - stored in 16 groups, with 4 sounds per group - are comprised of beeps, chimes, and melodies. Controls and memory card slot are located on front panel to facilitate access and operation. Volume control is located behind panel, along with rotary dial to select sound groups and SD memory card slot to program unique sound groups.
Monitor determines external pipeline corrosion rates.
Rohrback Cosasco Systems
Santa Fe Springs, CA 90670
Oct 20, 2008
Using Soil Corrosion Rate Monitor, pipeline operators can quantitatively determine soil corrosivity for External Corrosion Direct Assessment pre-assessment process at time of pipe excavation or inspection. Unit consists of soil corrosion rate probe with replaceable cone shaped tip, and electrochemical Corrater® Aquamate LPR instrument, which includes Solution Resistance Compensation to extend range of soils in which measurements can be made.
Transmitter measures moisture in liquid hydrocarbons.
Woburn, MA 01801 1008
Oct 16, 2008
Vaisala HUMICAP® moisture and temperature transmitter for Oil MMT162, measures moisture in oil in terms of water activity and temperature. Measurements are independent of oil type, age, and temperature. Model MMT162 has 2 analog outputs that can be scaled and measurement ranges changed. Featuring RS-485 serial output, and optional LED-cable for enabling visual alarm, unit suits applications in lubrication systems, hydraulic systems, and transformers.
Level Control Sensors optimize power measurements.
Rohde & Schwarz GmbH & Co
Oct 15, 2008
With measurement range of -67 to +20 dBm, Models NRP-Z28 and NRP-Z98 are intended for level calibration of spectrum and signal analyzers as well as for providing high-precision levels for receiver measurements. Model NRP-Z28 covers frequencies from 10 MHz to 18 GHz, while Model NRP-Z98 is suitable for 9 kHz to 6 GHz frequencies. To minimize uncertainties caused by mismatch, fully calibrated units feature VSWR of less than 1.11 for frequency range of 9 kHz to 2.4 GHz.
(Showing headlines 301 - 320) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39