Agilent Technologies, Inc
Santa Clara, CA 95051
Oct 10, 2008 Calibration-ready at test port, FieldFox promotes in-field productivity for base station installation and maintenance. Key assessments include cable and antenna test from 2 MHz to 4/6 GHz, spectrum analysis from 100 kHz to 4/6 GHz, vector network analysis, and true average power measurements. In addition to supporting simultaneous return-loss and distance-to-fault measurements, unit features fault location with 1,001-point resolution and 96 dB dynamic range.

Agilent Technologies, Inc
Santa Clara, CA 95051
Oct 10, 2008 Providing simulation of real-world conditions, PXB is designed to facilitate and accelerate testing of multiple-input-multiple-output (MIMO) receivers. It delivers signal creation and channel emulation capabilities for LTE and WiMAX standards as well as support for 2x2, 2x4, and 4x2 MIMO with bandwidth of 120 MHz. Other features include custom MIMO correlation settings, Signal Studio signal-creation software, as well as seamless signal routing and automated power calibration.

ADVA Optical Networking
Ramsey, NJ 07446
Oct 09, 2008 Optojack® establishes intelligent optical demarcation points to monitor optical services. It provides optical demarcation and service monitoring at handoff point between carrier networks and at demarcation point between carrier/customer network. Use enables remote operations, administration, and maintenance of key optical network elements in network access/backhaul portions. Regardless of underlying protocol, product enables loopbacks and other performance monitoring techniques.

Rohde & Schwarz GmbH & Co
  Germany
Oct 08, 2008 R&S ETH portable TV analyzer allows network operators to perform coverage measurements in field, at public sites, or in buildings. Supporting DVB-T and DVB-H standards, it comes in 4 models with frequency range of 100 kHz to 3.6 GHz or up to 8 GHz, with or without tracking generator. Features include MER value of greater than 40 dB, high-contrast color display, and preselector and preamplifier that raise dynamic range and sensitivity so weak signals can be detected via antenna.

JDSU
San Jose, CA 95131
Oct 02, 2008 Along with 7 in. display and intuitive GUI, MTS/T-BERD-4000 Multiple Services Test Platform offers communication service providers complete tool set for performing FTTx network tests from physical layer to application layer. Handheld instrument provides full optical test solution set, which combines functionality of OTDR, PON meter, LTS, video inspection scope, VFL power meter, and laser source. Automated scripting capability and data reporting capabilities are included.

The MTL Instruments Group PLC
Hampton, NH 03842
Sep 29, 2008 Tofino(TM) Industrial Security Solution is offered with loadable security module, which discovers and identifies what devices are on network and creates firewall rules to control traffic flowing to them. Functionality is derived from analyzing network traffic and does not impose any risk to industrial process. Solution makes up-to-the-minute network map always available to control engineer and never probes control devices. It suits industrial control operations in critical industries.

Gao tek Inc.
Toronto M1B 2K4  Canada
Sep 25, 2008 Model GAO4022 portable spectrum analyzer implements full phase-locked loop oscillator and all-digitized medium frequency processing technologies. It features RBW/VBW filters and medium frequency/video detectors that employ digital methods. Up to 200 measurement records can be stored within its internal, non-volatile memory, and they can be downloaded to PC through RS232 interface.

Spirent Communications
Calabasas, CA 91302
Sep 24, 2008 Supporting Layer 2-7 network performance testing, TestCenter(TM) Fibre Channel over Ethernet Solution helps assess interaction of storage and data center traffic over common interface. Test engineers can analyze critical occurrences including encapsulation of native Fibre Channel frame into Ethernet frame, emergence of Converged Enhanced Ethernet to help ensure lossless fabric, and effect of replacing Fibre Channel link with MAC addresses in CEE environments.

GAOTEK Inc
Toronto   Canada
Sep 22, 2008 Featuring automatic operation, GAO3984 can measure noise figure and gain of linear and quasi-linear networks. It covers frequencies from 10 MHz to 26.5 GHz and offers multiple test bandwidths (100/200/400 kHz and 1/2/4 MHz). Featuring user-friendly UI that facilitates configuration, PC Windows-compatible unit offers various ports for peripherals and can use third-party software for additional functionality and peripheral interfaces.

GAOTEK Inc
Toronto   Canada
Sep 17, 2008 Combining synthesized swept frequency signal source, multi-channel amplitude, phase-locked vector receiver, and S parameter measurement device, GAO3618 microwave integrative vector network analyzer simultaneously acquires information for amplitude, phase, and group delay of 4 S-parameters of network. It features 3.5 in. floppy driver, common print interface, and LCD color display. Unit also offers non-coaxial component measurement and direct sampling channel.

Great River Technology, Inc
Albuquerque, NM 87110
Sep 11, 2008 Able to capture and analyze 8B/10B traffic on link, including all data and special characters, HOTLink® Serial Link Analyzer accelerates implementing and troubleshooting video systems using HOTLink II SERDES solutions from Cypress Semiconductor Corp. Analyzer supports systems with link speeds from 160 Mbps to 1.5 Gbps and covers wide range of commercial and military video and data applications. Capture depth is up to 2 Gb, which provides 18-125 s of capture, depending on link speed.

Rohde & Schwarz GmbH & Co
  Germany
Sep 10, 2008 Intended for 50-75 and 220-325 GHz ranges, Models R&S ZVA-Z325 and R&S ZVA-Z75 millimeter-wave converters connect directly to 4-port R&S ZVA series network analyzers, eliminating need for any extra hardware. Converters for V, W, and J bands can be operated as part of base unit, and exceed 90 dB at 75 GHz and 60 dB (typ. 80 dB) at 325 GHz, allowing even high-blocking filters to be analyzed. Adjustable output power facilitates tests on amplifiers in development stage.

Agilent Technologies, Inc
Santa Clara, CA 95051
Sep 03, 2008 Using software feature for handheld wireless measurements, E6474A network optimization platform turns standard WiMAX PC Card (CPE) into WiMAX scanning solution for Drive Test. This mode of operation gives users means to confirm WiMAX coverage and provide basic troubleshooting tasks to assess signal quality. One WiMAX CPE can be used in Phone mode as standard WiMAX CPE or in Scanning Mode to provide dedicated RF measurements on up to 10 channels.

Agilent Technologies, Inc
Santa Clara, CA 95051
Sep 02, 2008 E5071C is offered with 20 GHz frequency range option for evaluating 3rd harmonics of passive components in WLAN, WiMAX(TM), UWB, or any 4G technology. Model E5092A test set is used to evaluate multiport devices for front-end modules in cellular handsets or WLAN devices. It provides up to 22 port measurements and can be used with Measurement Wizard Assistant software to simplify complex system setups. Both models feature user interfaces compatible with existing solutions.

Spirent Communications plc
Crawley   United Kingdom
Sep 02, 2008 Designed to test IP video service quality of Multimedia over Coax networks, Spirent Tech-X Flex supports current and future in-home networking technologies, including Ethernet and WLAN. Telcos and cable TV operators can verify and troubleshoot both network and service related issues inside customer premise. With dual MoCA and dual Ethernet interfaces, Tech-X Flex offers in-line monitoring solution that helps avoid issues with proprietary signaling between set-top box and video server.

Hilscher North America Inc
Lisle, IL 60532
Sep 02, 2008 PCI based network analyzer netANALYZER is designed for use with real-time industrial Ethernet protocols such as EtherNet/IP with CIPSYNC, EtherCAT, PROFINET RT/IRT, and SERCOS III. Network traffic can be time stamped within 10 nsec resolution, providing accurate information to determine jitter and delay times for individual nodes. It is capable of measuring network performance of high performance drives and motion control products based on IEEE 1588 specification.

Gao tek Inc.
Toronto M1B 2K4  Canada
Aug 20, 2008 Model GAOAV3620 RF Integrated Vector Network Analyzer performs accurate measurement of amplitude, phase, and group delay in RF networks, and can also measure time domain and frequency conversion components. Features include configurable upper and lower limits measurement, LCD display, and simultaneous display of 4 channels (maximum 8 testing curves).

Anritsu Co.
Richardson, TX 75081
Aug 19, 2008 Covering 9 kHz to 7.1, 13, and 20 GHz ranges, MS271xB Series has 10 MHz demodulation bandwidth and supports GSM, CDMA, W-CDMA, W-CDMA/HSDPA, EVDO, and WiMAX measurements. RF measurement option includes TD-SCDMA signal measurement suite with Channel Spectrum view and demodulator option. Both 100 dB dynamic range and phase noise of -110 dBc/Hz at 10 kHz offset provide measurement accuracy. Software combines multiple swept measurements into summary displays of phase noise performance.

JDSU
San Jose, CA 95131
Aug 19, 2008 NetComplete helps operators migrate from TDM switched circuit environment to Ethernet/IP technology as well as meet backhaul provider service performance requirements. Solution is comprised of OSS software, QT-600 Ethernet probe, and CENTEST 650 as well as other Ethernet test portables. Standards-compliant, end-to-end service turn-up and performance monitoring are also included to help eliminate potential issues related to network element interoperability and upgrades.

Anritsu Co.
Richardson, TX 75081
Aug 15, 2008 Single slot CMA5710 module for CMA 5000 enables testing of 10/100/1000 Mbps Ethernet networks. Module provides 2 optical (SFP) and 2 electrical (RJ45) ports, and is designed to facilitate installation and maintenance of Ethernet networks. RFC2544 test functions include: throughput, latency, and frame loss. For maintenance and troubleshooting, module provides non-intrusive monitoring capabilities and presents comprehensive statistics for insight into network health and status.