FKM-USA, LLC.
Glenwood, IL 60425
Jul 09, 2008 Based on application of reactive multiple-part urethanes directly onto rotating roll core, rotary casting eliminates need for poured molds and secondary curing process. Process creates solid roll cover within minutes, and rolls can be delivered in days. Hardness and uniformity are held consistently across roll to within +3 ShA points or better for optimal mechanical properties. Roll sizes can be produced from 6-71 in. dia and up to 472 in. long.

FKM-USA, LLC.
Glenwood, IL 60425
Jun 05, 2008 Eliminating need for poured molds and secondary curing, rotary casting process reduces production time and enables delivery of polyurethane (PUR) rolls in days. Service can direct cast different types of materials onto any rotational-symmetric body, consistently maintaining hardness uniformity across roll to within +3 ShA points or better while optionally varying hardness of specific layers. Rolls can be produced in diameters from 6-71 in. and lengths up to 472 in.

Fivestar Die Casting Inc.
Moundsview, MN 55421
May 15, 2007 Providing custom high-pressure/high integrity aluminum and zinc die castings with full machining and component assembly capabilities, Die Casting manufacturing service delivers line-ready assemblies to meet just-in-time requirements. Press capabilities in zinc and aluminum range to 400 and 800 tons clamp force, respectively, while high integrity processes include squeeze casting and semi-liquid casting. Service targets hydraulic, engine, and electrical end product applications.

Accures Casting
Moreland Hills, OH 44022
Feb 21, 2006 Utilizing polymer composite ACCURES CCT(TM) cast to tolerance technology, parts can be cast flat to .0002 in./ft and hole diameters to .0001 in./in. dia. Machine components from 100-50,000 lb can be precisely cast in color and immediately used in assembly. By eliminating machining and stress relieving, casting process allows cast parts to go directly to assembly. Resulting products offer vibration dampening and chemical resistance characteristics.

General Kinematics
Crystal Lake, IL 60014
Nov 28, 2005 VIBRA-DRUM® sand and casting processors are suited for high-volume mold/sand handling in foundry applications. In one continuous operation, this 2-mass system removes sand and tramp metal without damaging castings, reduces sand lumps to original grain size, and equalizes shakeout sand temperature. Non-rotating design features natural frequency vibration, high-frequency agitation, and 2-mass vibrating drums that deliver capacities to 400 TPH.

Master Bond, Inc.
Hackensack, NJ 07601
Aug 06, 2004 Dual-component EP42HT-2 epoxy adhesive, sealant, coating, and casting material withstands repeated sterilizations, including radiation, ethylene oxide, chemical sterilants, and steam. Featuring service operating temperature range of -60 to +450°F, product exhibits chemical resistance and Shore D hardness greater than 75. Properties include mixed viscosity of 3,500 cps and tensile strength greater than 12,000 psi. It is castable in thicknesses exceeding 2–3 in.

Progress Casting, An Acrometal Co.
Plymouth, MN 55447
Jul 10, 2003 Continuous-cast aluminum alloy Truline Series 850 bars, available in solid and tube shapes, withstand operating pressures to 10,000 psi and speeds to 36,000 rpm. Acid- and corrosion-resistant material is hard enough to resist excessive penetration by dirt or waste metal particles and is soft enough to allow particles to penetrate bearing surface. Bars are available with 11/16–13 1/2 in. OD and 10 in. ID, with ¾ in. minimum wall section. Lengths are available up to 12 ft.

Vantico Inc.
East Lansing, MI 48823
May 28, 2003 Fitted with nylon program module, MCP/04 vacuum casting machine manufactures nylon prototypes and parts in 6 min. Nylons PA 700 and PA 1000 are PA-6-grade plastics that exhibit flexural modulus of 108,750–137,750 psi, tensile strength of 4,640–6,090 psi, and heat deflection temperature of 169 to 269°F @ 66 psi. RenPIM-VG SG 220 vacuum casting polyurethane is transparent white for pigmenting and produces parts with 285,000 psi flexural modulus and 8,100 psi tensile strength.

Tra-Con, Inc.
Bedford, MA 01730
Feb 06, 2003 General-purpose casting compound LX30007, suited for underfill and encapsulating applications, produces strong bonds, with lap shears of over 2,000 psi. With glass transition temperature of 78°C, 2-part epoxy offers viscosity of 7,600 cps and cures at room temperature.

Graphicast, Inc.
Jaffrey, NH 03452 5833
Apr 10, 2002 ZA-12 casting process uses permanent graphite molds to produce parts from ZA-12 zinc-aluminum alloy. Castings can include contours, surface elevations, holes, and other precise features. Process is suitable for making high-precision components for medical equipment and is economical in quantities of 300 to 20,000 parts per year. Company provides design, rapid prototyping, tooling and mold production, casting, and secondary machining.

Brighton N C Machine Corp.
Brighton, MI 48116
Mar 20, 2002 Final Cut castings eliminate need for pavement removal around street castings. Cover and rim elevation of manholes, catch basins, and hand holes can be raised by 1 1/2 in., regardless of thickness of cover. Cast iron construction provides corrosion resistance and durability. Combination of Final Cut rim, riser and cover allows use of BMPs for control of erosion and sedimentation.