Ametek Automation & Process Technologies    Clawson, MI 48017
Apr 06, 2012 With no moving parts to wear out, AMETEK/Gemco 955 eBrik provides continuous position feedback when installed on automated factory machinery. Unit is available in stroke lengths from 1-72 in. with analog output of 0-10 Vdc or 4-20 mA. Sensor offers field programmable zero and span settings, electronic diagnostic feedback, and accuracy to ±0.03% of stroke. With IP67-rated aluminum enclosure, transducer is shock-resistant and operates in damp, dirty, and extreme temperature applications.

Future Fibre Technologies (US) Inc.    Mountain View, CA 94040
Apr 05, 2012 Able to detect intrusions on fences, be buried in ground across open areas to detect footsteps, or both, fiber optic FFT Aura(TM) provides multiple event detection, advanced signal processing, and pinpoint (within 20 ft or better) location accuracy. Resiliancy caters to critical sites requiring continuous operation in event of damaged or cut sensor cable, while signal processing and event analysis minimize nuisance alarms. System can interface with security management via FFT CAMS(TM) GUI.

Measurement Specialties, Inc.    Hampton, VA 23666
Apr 04, 2012 Featuring 300-5,000 psi range, CE-compliant and MEMS-based EB100 operates from -40 to +125°C with ±1% TEB and is intended for space-constricted designs. Unit is suited for measurement of liquid or gas pressure, including difficult media such as contaminated water, steam, and mildly corrosive fluids. Promoting stability over temperature range, UltraStable(TM) technology employs silicon-based strain gage isolated from media via oil-filled capsule and stainless steel diaphragm.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Apr 04, 2012 Supplied pre-calibrated for horizontal, inline mounting, Series DTFW is available with brass or 316 stainless steel body to withstand system pressures up to 3,000 psig. Ranges are offered up to 30 gpm, and products measure water flow rates with ±2% FS accuracy. Available with ¼, ½, and 1 in. connections, series features 2.5 in. dia dial face. Other elements of construction include 302 SS spring and range spring, PTFE-coated magnet, acetal or PTFE metering cone, and Buna seals.

MEDER electronic, Inc.    West Wareham, MA 02576
Apr 03, 2012 Measuring 5 x 1.8 x 2.2 mm, MK24 series has rugged over-molded package containing hermetically sealed reed switch. Products do not require any external power to operate and achieve min life expectancy of 50 million operations at 5 V, 5 mA, 100 Hz. Suited for applications with low power and space limitations, series is available in NO and NC versions, 5 contact sensitivity ranges, and 3 SMT lead designs: flat straight cut axial lead; flat, bent SMD gull-wing lead; and J-lead.

Frigel    East Dundee, IL 600118
Apr 03, 2012 Installed in customer's facility, microprocessor-based Model PMR serves as interface between equipment and Internet. Digital display shows main operating temperature as well as descriptive alarm messages, and comes with ergonomic keypad that offers access to control screens and menus. Via web, PMR enables technicians to identify problems and resolve them using features that control fan speed and monitor ambient temperature, pump pressure, flow, reservoir levels, valve, and filter pressure.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Apr 03, 2012 Suited for applications that range in height or dimensional measurement in automatic material handling, DS2 series covers controlled heights from 15-250 cm, including 5 m operating distances for 6 mm resolution versions or 10 m for 25 mm resolution versions. Measurement configuration can be manually set due to internal dip-switches or via GUI from remote PC. Along with PNP, 0-10 V outputs, and serial RS485, features include stand-alone operation once program is loaded on flash memory.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Apr 03, 2012 Used for vibration monitoring of rotating machinery and other equipment, low-profile model 3059A has thru hole 1/4-28 mount and radial 2-pin MIL-C-5015 connector. Design incorporates ceramic shear sensing element in stainless steel housing, and sensor can be turned 360° prior to being secured to aid installation. Available with sensitivity of 100 mV/g, hermetically sealed unit has low-end frequency response of 0.5 Hz and is internally case isolated to avoid EMI/ground loop interference.

Safety Technology International    Waterford, MI 48327
Apr 03, 2012 Capable of monitoring up to 4 sites, STI-V34104 sounds tune or prerecorded, programmable voice message upon trip. There are 10 tones/tunes and 53 selectable words in English or Spanish available for creation of custom, 4-word max message. Featuring 1,000 ft range (line of sight), receiver can be mounted on wall or sit on table and also has 4 LED zone indicators, 12 Vdc power supply, as well as low-battery and connection supervision. Voice prompts are also offered for programming.

Measurement Specialties, Inc.    Hampton, VA 23666
Apr 02, 2012 Encapsulating temperature sensing chip and 24-bit ADC in QFN16 package, Model TSYS01 is designed for industrial control, HVACR, and heating/cooling systems. Optimal performance is achieved through use of stabilized, noise-free power supply with placement of ceramic capacitor close to supply pins. Drawing less than 12.5 µA during normal operation and less than 0.14 µA on standby, Model TSYS01 operates from -40 to +125°C and can be embedded in most electronic applications.

LumaSense Technologies, Inc.    Santa Clara, CA 95054
Apr 02, 2012 Employing non-dispersive infrared technology, SmartDGA(TM) can help utilities achieve widespread condition monitoring across generation, transmission, and distribution assets, minimizing outages caused by faulty load tap changers and transformers. System uses proprietary algorithm, developed in accordance with utility standards, to analyze and report LTC conditions. SmartDGA requires no carrier gas, no frequent calibrations, and can be retrofitted to LTC's to provide asset condition status.

Future Fibre Technologies (US) Inc.    Mountain View, CA 94040
Mar 30, 2012 Featuring 2 independent zones (up to 1,600 ft long each) per controller, FFT Secure Point(TM) provides 2 zone fiber optic perimeter intrusion detection for short perimeter market. Sensitivity is achieved via use of interferometric detection techniques, allowing use on diverse fence types and styles. Along with TCP/IP, USB, and Form C contacts as interfacing options, features include signal processing and intelligent algorithms that minimize environmental nuisance alarms.

Graywolf Sensing Solutions    Shelton, CT 06484
Mar 30, 2012 Suitable for continuous monitoring and/or 30-minute spot checks, Model FM-801 may be used as independent data logger, with data downloaded to WolfSense PC software. Reusable sensor cartridge, supporting up to 1,000 tests, employs chemical reaction between formaldehyde and ß-diketone on porous glass. Yellowing that results from reaction is measured via photoelectric photometry with readings ranging from less than 20 ppb to 1 ppm HCHO, without significant cross-sensitivity.

RDP Electrosense, Inc.    Pottstown, PA 19465
Mar 30, 2012 LVDTs feature stainless steel construction that resists corrosive effects of winter road treatments and also allows operation in marine environments. Utilizing 4-20 mA, 2 wire loop minimizes wiring installation and meet needs of applications requiring long cable runs. Used to measure movements and strain in structures caused by weight and volume of traffic, environmental conditions, and other factors, data helps engineers predict potential problems and maximize safe working life of bridge.

Omega Engineering, Inc.    Stamford, CT 06907
Mar 28, 2012 Designed for use in water treatment disinfection applications and for use with chlorine generators and pools, FCLTX Series is available in several ranges for detecting ppm levels of free chlorine. Users can choose FCLTX-102 for 0-2 ppm, FCLTX-105 for 0-5 ppm, or FCLTX-110 for 0-10 ppm. Operating from 32-113°F with maximum pressure of 14.7 psig, sensors deliver direct 4-20 mA output and include 500 V input to output isolation.

ifm efector, Inc.    Exton, PA 19341
Mar 28, 2012 Suited for use throughout manufacturing process, Series O2V efector dualis Pixel Counter sensor analyzes area of object by counting pixels and can identify objects that vary in shape, size, or shade. Product comes in die-cast metal housing and integrates image sensor, evaluation electronics, and lighting. Along with pushbutton setup, this compact CMOS vision sensor offers 4-digit numeric display to indicate sensor output and carries 100 mA max load current per switching output.

Lowrance    Tulsa, OK 74128
Mar 28, 2012 Used for fishing, diving, and search and recovery operations, LSS-2 StructureScan® HD combines DownScan Imaging(TM) and side-scan imaging technologies. Transducer design features 3 dedicated signals for clear views to left, right, and directly beneath boat. When paired with HDS Gen2, module also supports StructureMap(TM) view. Additional features include compatibility with Lowrance enhanced basemaps, Insight(TM) HD cartography, Navionics®, and all HDS-compatible third-party charting cards.

Helm Instrument Company, Inc    Maumee, OH 43537
Mar 28, 2012 Able to accept input from up to 6 frame or in-die mounted strain gage sensors, PTM-4500 LoadGard can be used with most types of press machines. Built-in alarms prevent machine damage while high/low limits provide tooling protection and consistent part quality control. Embedded PC, signature display on color touchscreen, job recipe storage, SPC charting, and Ethernet connection are standard. Latter enables cloud computing via Helm WebView software.

Rotronic Instrument Corp.    Hauppauge, NY 11788
Mar 27, 2012 Based on NDIR principle, CO2 Transmitters measure carbon dioxide, carbon monoxide, and temperature. Units feature auto calibration function, relay and alarm, and operating range of 0-50°C/0-95% humidity. Designed to detect CO2 before it poses risk, transmitters are suited for regulating ventilation in living areas, offices, classrooms, cinemas, and hospitals, as well as for measuring CO2 pollution in garages, tunnels, and logistics facilities.

IntelliBatt, LLC    San Rafael, CA 94901
Mar 23, 2012 With built-in battery monitoring system, IntelliBatt Cabinet delivers predictive trending and asset management for critical datacenter power systems. Enclosure can accommodate different battery sizes and terminal configurations as well as active heat dissipation system to maintain optimum temperature. Through integrated in-door viewing panels, operator can check key indicators on controller and status of every battery. In-door access panel allows safe operation of breaker without opening doors.