Protection One
Lawrence, KS 66044
Oct 18, 2007 Available 24/7, e-Secure enables users to control and monitor business security systems while offsite using Internet-connected computer, PDA, or text-enabled cell phone. Business owners or managers can check alarm status, arm and disarm system, view system history, as well as add and delete users. Additionally, notification lists can be set-up online to determine who receives e-mail or text alerts about alarm and non-alarm activity and under what circumstances.

AKCP Co. Ltd
Bangkok 10900  Thailand
Sep 18, 2007 Suited for environmental and security monitoring, securityProbe features 4 built-in pan-tilt controllers as well as 32-bit Xscale PXA270 312 MHz processor; 128 MB nonvolatile flash memory; and 10/100 Mbps Ethernet, serial, USB, RS485, and Modbus ports. It also has 8 full autosense RJ-45 ports for connection to AKCP intelligent sensors. Running on Linux embedded OS, system offers 640 x 480 pixel resolution with 15 fps frame rate and 320 x 240 pixels at 30 fps.

NAPCO Security Systems, Inc.
Amityville, NY 11701-2800
Sep 13, 2007 Freedom(TM) 64 Coded, acting as traditional burglar alarm unit, installs with up to 64, 3- to 6-digit user codes. Also available, Freedom 64 Code-Free hybrid - designed for high technology security system - eliminates false alarms and optimizes account retention. Both touchpads have built-in UL dual-tone smart burg/fire siren, adaptive occupancy pet PIR with 25 ft wide-angle coverage, adjustable volume voice prompt assist speaker, and 4-zone EZM expander.

Bosch Security Systems
Fairport, NY 14450 9199
Sep 05, 2007 Offering plug-and-play installation through cable jack connection, resettable Manual Call Point reacts with mechanical activation that gives clear feedback when frangible element is triggered. Unit can be reset using key, which is inserted in slot under hinged maintenance flap, so it can be ready for use after activation without need to replace glass pane. Consuming 0.4 mA over 15-33 Vdc voltage range, MCP is offered in red, blue, or yellow for FIRE, EVACUATE, or HOLD UP.

Locution Systems, Inc
Golden, CO 80401
Aug 16, 2007 Comprised of software and touch screen hardware, CADVoice® ZoneTracker(TM) allows fire and EMS personnel to tell fire station's alerting system where they are located in station and bunk room in which they will be sleeping. If 911 call comes through during night, system will automatically route dispatches, as well as lighting and tonal alerts, directly and only to rescue crew being dispatched for call, letting others sleep through night and speeding response times.

RedSky Technologies, Inc.
Chicago, IL 60622
Aug 10, 2007 Powered by RedSky's Location Information Server, Broadcast Alert(TM) Service enables emergency and security personnel to quickly reach large groups of people with emergency and alert messages. It leverages Emergency On-site Notification feature in RedSky E911 Manager application to deliver SMS text messages to cell phones as well as email messages to desktop and laptop computers. Regardless of content, messages can be created and sent in seconds to thousands of subscribers.

Cedar Point Communications, Inc.
Derry, NH 03038
Aug 03, 2007 Designed for campus and university environments, Campus Emergency Notification Solution can provide customized warnings on location-by-location basis. It uses SAFARI C(cubed) Multimedia Switching System capabilities, existing university telecommunications plant infrastructure, and emergency warning devices to issue notifications and instructions to faculty, staff, and students. Leveraging IP communications, campus security can tailor individual instructions to specific locations.

Rontal Applications, Ltd.
Lod 7110  Israel
Aug 02, 2007 SimGuard 6000 enables organizational headquarters to detect and control incidents in remote facilities. It builds virtual reality model of each remote facility, including a virtual installation of actual sensors, and stores it in database. Sensors include cameras, fences, access-control devices, GPS, RFID, fire alarm sensors, and intrusion detection devices. Vulnerability assessment of each remote site is constantly performed based on simulation of various potential scenarios.

CIMTechniques
Beaufort, SC 29902
Jul 25, 2007 Available in 2.4 GHz and 900 MHz, Wireless Remote Monitoring Stations can monitor temperature, humidity, CO2, differential pressure, airflow, light level, door ajar condition, and motion. Up to 8 sensors can be connected to each station over plug-and-play SensorBus network. Incoming data is compared against user-assigned alarm limits and generates messages when out of range conditions are detected. Messages can be sent via email, telephone, text messaging, and pager.

Honeywell Power Supplies
Northford, CT 06472
Jul 09, 2007 Delivering 2.5, 4, or 6 A, Series HP-ULM, HP-ACM, and HP-ULPD provide continuous power for fire alarm accessory operation including fire door locks, fan shutdown, elevator recall, and magnetic door holders. Each unit features electronically regulated and field selectable 12 or 24 Vdc output that is fully filtered and automatic switchover to standby battery should AC power fail. Built-in charger is provided for sealed lead-acid or gel-type batteries.

Safety Technology International, Inc.
Waterford, MI 48327
Jun 27, 2007 With ability to operate stopper from both sides of door without using alarm delays, Exit Stopper® sounds 95 or 105 dB alarm for 30 sec, 3 min, or continuously if protected door is opened. Containing Exit Stopper housing with DPDT key switch mounted on one side of door or wall and DPDT key switch without an alarm on opposite side of door, alarm can be disabled by authorized user. Illuminated LED alerts that door is disabled.

Silent Knight
Maple Grove, MN 55369 4927
Jun 26, 2007 Listed to UL 9th edition standards, Farenhyt IFP-100VIP and IFP-1000VIP have onboard support for over 100 addressable devices and can be expanded to support up to 1,016 addressable devices. Units include single button reset and silence functions, built-in digital communicator, programmable zone or point reporting capability, integrated dead-front cabinet, and 6 A/24 Vdc power supply. Programming is via onboard user interface or SKSS PC-based programming software.

Matrix Systems, Inc.
Dayton, OH 45459
Jun 26, 2007 RCM III(TM) with PoE offers door strike capabilities for securing remote entryway access control in airports, hospitals, corporate buildings, industrial plants, schools, and government facilities. Door controller enables new and retrofit sites to supply power to new door readers, door controllers, and door strikes via building's Ethernet. Unit is compliant with IEEE 802.3af standards.

Safety Technology International
Waterford, MI 48327
Jun 22, 2007 Featuring ability to operate stopper from both sides of exit/entry door without using alarm delays, Exit Stopper® with Dual Access Control helps prevent unauthorized fire door exits and entries. Only authorized person with key can disable/re-enable alarm from either side of door. If protected door is opened without key, 95 or 105 dB alarm will be emitted for 30 sec, 3 min, or continuously according to user preset. Key-operated override silences alarm.

Bosch Security Systems
Fairport, NY 14450 9199
Jun 20, 2007 Strobe 420 Series fire detection device produces synchronized, high-visibility flashes at 1 Hz. Addressable device is loop powered, freely configurable, and allows users to program which strobe is switched on and in which event. Features include automatic component identification, address assignment support, 6 mA power consumption, and functional security. Device complies with EN 54-23 standard, and is safe for photosensitive individuals.

Honeywell Power Supplies
Northford, CT 06472
Jun 06, 2007 Capable of displaying over 500 different text messages, NGA (network graphic annunciator) delivers information on source of alarms along with applicable emergency contacts and hazardous material storage areas. Mounted to front of E3 Series(TM) FACP or in multiple remote locations, it offers building managers tight level of fire system monitoring and control. Text messaging features allow users to preprogram vital information to be displayed during alarm incidents.

CentrAlert Inc.
Kennewick,, WA 99336
May 21, 2007 Capable of simultaneously reaching thousands of computer and cell phone users, Notifier(TM) takes control of their screens to display important information. It will not relinquish control until user closes screen message, which automatically sends acknowledgement back to system administrator. Standalone system can also act as module in CentrAlert® EOS(TM) (emergency operating system), where one computer mouse click can notify thousands of users and activate public warning devices.

Global Security Systems, LLC
Jackson, MI 39201
May 10, 2007 ALERT FM personal alert messaging system enables campus administrators, emergency management personnel, or police to create and send emergency notifications to students, staff, first responders, or citizens. Students and staff receive alerts via ALERT FM receivers or USB sticks, as well as mobile devices equipped with standard FM chip. Messaging is delivered via secure, private digital network that utilizes existing FM standards and transmitters.

WatchGuard Technologies, Inc.
Seattle, WA 98104
May 04, 2007 Firebox® X Core(TM) and Peak(TM) come with Fireware® 9.0 software as well as networking features such as VPN/multi-WAN failover, drag-and-drop VPN tunnel creation, policy-based routing, VLAN, QoS, load balancing, and high availability with firewall rules. While Core appliances suit SMEs with 50-750 users and are capable of 300+ Mbps of firewall throughput, Peak appliances support 500-2,000 users with 2.0 Gbps of firewall throughput. Both offer complete Unified Threat Management solutions.

NOTIFIER Fire Systems
Northford, CT 06472
Apr 30, 2007 Engineered for medium-sized applications, modular NFS2-640 comes with multiple display options and one Signaling Line Circuit, expandable to 2. Panel supports up to 636 intelligent devices and has 4 Notification Appliance Circuits with built-in synchronization protocol for System Sensor, Wheelock, and Gentex horns, strobes, and horn/strobes. Using FlashScan® polling protocol and ONYX Intelligent Sensing technology, scalable product optimizes response to smoke and heat conditions.