|
|
Advertisement
|
|
Safety & Security Equipment ->
Alarm Systems
Alarm Systems
(Showing headlines 161 - 175) 1 2 3 4 5 6 7 8 9
|
 Electronic Siren automatically adjusts sound output.Norstat, Inc.
Rockaway, NJ 07866
Nov 21, 2002 Series 120 continuously monitors background noise and automatically adjusts volume output between 72 and 107 db to always be 5 dB louder than surrounding ambient noise. IP65 protection rating provides immunity to negative environmental influences such as water and dust, making it suitable for adverse, outdoor, and other transportation type applications such as forklifts, AGV’s, trucks, sweepers, and industrial machinery. |
 Fire Alarms are easy to install, operate, and maintain.Edwards Signaling & Security Systems
Plainville, CT 06062
Oct 25, 2002
FireShield® consists of 3, 5, and 10 zone fire alarm control panels, integrated DACT/Dialer, serial annunciator modules, and serial remote relay modules. It features front panel programming, 1 person walk testing, and selectable IDC and NAC styles. Each IDC can be programmed for 1 of 8 types including waterflow and supervisory. Genesis® strobes are compact visible emergency devices, and SC Series detectors provide early warning of fast or slow burning fires.
|
Alarm Communicator sends point-specific event data.Keltron Corp.
Waltham, MA 02154
Oct 01, 2002 Serial Digital Alarm Communicator Transmitter (SDACT) accepts RS232 data from intelligent, addressable Fire Alarm Control Panels (FACPs) and serial data sources. SDACT accepts data, dials Digital Alarm Communicator Receiver, and sends addressable point and event specific data for annunciation. Unit provides four EOL resistor supervised hard wired zone inputs. SIA format facilitates annunciation of account number, point or zone number, and event or detector type at receiver. |
Audible Signals feature low frequency of 2000 Hz.Mallory Sonalert Products, Inc.
Indianapolis, IN 46214
Aug 19, 2002 SC628ND continous tone and SC628NDP fast-pulse devices are panel mounted with sealed backs. They provide output range of 75 to 95 db, while consuming only 3 to 16 mA. Operating voltage is 6 to 28 V, and operating temperature is -30 to +65°C. Originally designed for application in automatic gate and door operators, signals are also suitable for fire alarms, medical equipment, industrial equipment, marine, aircraft and automotive applications. |
 Audio Controller has 30 minute minimum run time.Federal Signal Corp., Signal Div./Electrical Products
University Park, IL 60466
Jul 08, 2002
UltraVoice(TM) provides control of high-powered sirens and indoor speaker systems. It produces amplified audio signals including 7 built-in warning tones; high-quality live public address; and up to 16 variable-length, pre-recorded voice messages. Utilizing Class D, Pulse Width Modulated amplifier technology, UltraVoice delivers over 90% efficient audio output. Up to 3,200 W of audio power is provided by 8 individually addressable amplifiers.
|
Fire Information System works over Internet.Simplex
Westminster, MA 01441
May 06, 2002 SafeLINC(R) Internet-based communications link lets facility managers and building owners use web browser to monitor status of their fire alarm system from off-site locations. It allows authorized users to access fire alarm system information from PC, laptop, personal digital assistant, or pager. In event of alarm or trouble condition, link automatically sends email to designated staff informing them of situation. Module mounts to fire alarm control panel. |
 Public Address System sounds alarms and emergency notifications.GAI-Tronics Corp.
Reading, PA 19607-1060
May 01, 2002 Microprocessor-based NOVA 2001 provides routine announcements, emergency announcements, PABX or telephone announcements, and alarm tone/speech activation. PA System can be integrated to PC so operator can monitor and manage operations from on-site or remote location. System information, such as equipment failure or alarm, can be recorded and downloaded to printer or file. Using SMART Modules(R), system performs self-diagnostics and automatic level setting of broadcasts. |
 Level Sensor has analog control output.Gentech International Inc.
Chantilly, VA 20151-1649
Apr 30, 2002 ESS extended liquid level sensor has 4 to 20 mA, 24 Vdc output loop proportional to liquid level, providing analog output for control and instrumentation applications. It also has contact for low level alarm. Sensor provides output through single float traveling its length, making it suitable for use in storage tanks for water, oil, and fuel. Models are available in brass and stainless steel with operating temperature range of -30 to + 120 deg C.
|
 Monitoring System offers secure World Wide Web access.Munters Corp.
Amesbury, MA 01913 3204
Apr 22, 2002 ExactAire system monitors operation of dehumidification, cooling, and heating equipment on job site, and alerts users of control failure. Capable of monitoring dew point, surface temperature, and relative humidity, system permits users to set desired parameters. Customizable alert messages are deliverable via pager, fax, e-mail, PCS, or telephone. Messages include alert condition and location, make, model, and serial number of involved unit. |
 Employee Alarm uses visual and audible signals.Fast Alert
Green Bay, WI 54304
Apr 08, 2002 Fast Alert(R) informs help teams where emergency occurred in the workplace. Handicap-accessible button activates system. Large, red strobe generates 1,200 candelas per second and provides maximum visibility even in bright sunlight. Horn generates 100 decibels at 10 ft, sufficient to be heard above common manufacturing ambient levels. Replaceable, 12 Vdc battery pack or 9 ft, 12 Vac cord powers system. Fast Alert complies with OSHA 1910.165. |
Alert Delivery System detects and directs warnings.Emerson Process Management
Knoxville, TN 37932
Mar 06, 2002 PlantWeb(R) Alerts deliver alert and user support guidance triggered by diagnostics from Emerson intelligent field devices. They prioritize measurement, final control deterioration, or fault conditions, and selectively warn maintenance personnel/operators. Alerts are presented via AMS and DeltaV(TM) digital automation system, and are identified as predictive, maintenance, or failure alert. |
Security System protects servers and routers.Digi International
Minnetonka, MN 55343
Feb 20, 2002 PortServer CM(TM) console management system enables system administrators to monitor and control IT equipment such as Unix and Linux servers, routers, network switches, and telephone switches through serial ports. Using Secure Shell (SSH v2) security interface, it protects against unauthorized data monitoring (sniffing) and provides access to approved users on per port basis. Detailed Console History Log can be used as diagnostic tool. |
 Circuit Monitor detects oscillatory and impulsive transients.Square D Co.
Palatine, IL 60067
Feb 12, 2002 POWERLOGIC® Series 4000 permanently mounted circuit monitor with transient detection (CM4000T) automatically generates alarm so that action may be taken to correct problems before facility shuts down. It detects and captures oscillatory and impulsive transients (up to 10,000V peak, line-to-line) as short as 1 microsecond in duration. CM4000T maintains historical record of number of transients per phase, magnitude, duration and time of occurrence. |
 Signal Beacons come with protective housings.Norstat, Inc.
Rockaway, NJ 07866
Feb 05, 2002 WERMA Signaltechnik Series 815 beacons and Series 109 and 110 audible elements have single-, double-, and triple- element, surface-mount housings that provide protection rating of IP 65. Housings are suitable for use as closed, portable units or as fixed wall-mounted units. Quick-mount capability of housing makes for rapid interchanging of components, allowing for variety of possible combinations. |
 Alarm Software displays images.Gray Electronics
Kyle, TX 78640
Nov 08, 2001 Version 7.1 Alarm Verification software displays archived photos of any person who arms or disarms burglar alarm system. This allows security guard to compare the stored photo and current video image side by side on the same video screen. The operator may select a detailed view of each picture and save pictures for use in a written report on the incident or included in e-mail to inform the authorities of any unauthorized uses of pass codes.
|
(Showing headlines 161 - 175) 1 2 3 4 5 6 7 8 9
|
|
|