Hydratight
Red Wing, MN 55066
Nov 04, 2009 Suited for use on hard-to-reach pipe flanges whose integrity must be maintained, QuickFace has self-centering design with adjustable collets and clamps that provides concentric operation and accuracy. Portable tool weighs 15 lb and uses ½ in. cutting tools. Interchangeable lead screws make it suitable for resurfacing damaged raised-face and lens-ring joint flanges to varying finish standards. Rotated by hand, tool employs worm-gear mechanism that provides spiral gramophone finish.

NUM Corp.
Naperville, IL 60563
Oct 09, 2009 Combined with conventional 3-axis X-Y-Z movement of underlying cutting machine, NUMcut provides means of extending capability of machinery from 2D to 3D applications with precise multi-axis interpolation. Integrated pan-and-tilt tool head, intended for plasma, laser, and waterjet cutting machinery applications, employs gimbals and Cardan universal joint to convert movement of 2 linear actuators into 360° of panning motion plus control of tilt angle up to 47°.

RIDGID
Elyria, OH 44035
Sep 21, 2009 Working with all RIDGID standard press tools, including CT-400, 320-E, RP 330-B, and RP 330-C, RIDGID® Press Snap(TM) soil pipe cutter eliminates need for manual ratcheting and cuts most 1½-4 in. no hub and service weight soil pipe. There is no need to score pipe beforehand.

Aven, Inc.
Ann Arbor, MI 48108
Sep 16, 2009 Equipped with HRC 54 or HRC 56-60 SS blades, industrial-grade 2-in-1 Combination Scissors can cut copper-braided wire, nylon, or Kevlar fiber and insulated cord. Notched gripping surface from tip to middle of blade holds items firmly for fine, clean, flush cuts without slipping. It can cut aluminum or copper sheets up to 0.5 mm thick or plastic plate and PET packaging up to 1.0 mm. Higher up are U-style blade notches that tightly hold copper wire or rubber-coated cord up to 1.5 mm in diameter.

TELCON Ltd. PCD Cutting Tools
Afula 18110  Israel
Jul 27, 2009 Specially designed for cutting highly abrasive materials, PCD Countersinks allow for accurate forming of holes. Units with interchangeable pilot enable replacement of damaged pilots or substitution of various pilot diameters. They come in body diameters from 3/8 to 1 ¼ in. For constant hole diameters, PCD Countersinks with integral pilot come in body diameters of 3/8 and ½ in. as well as 10, 12, 14, and 17 mm. Both types have countersink angle of 100/130°.

Pacific Handy Cutter, Inc.
Costa Mesa, CA 92626
Apr 29, 2009 Suited for occasional and production carton cutting, S7(TM) Safety Cutter features Safety Blade/Guard Activation System, which extends blade and guard simultaneously, preventing razor blade cuts while cutting, and then springs back safely. Universal right- and left-handed tool has 3-in-1 design that also includes integrated tape splitter and shrink wrap cutter.

Kennametal, Inc.
Latrobe, PA 15650-0231
Apr 15, 2009 Designed to help increase number of parts per edge, Beyond(TM) screw-on positive insert chip breakers - FP (Finishing Positive), MP (Medium/Roughing Positive), MW (Flat Top) - include 11 grades optimized for steel, stainless steels, and cast-iron applications. All share features such as micro-polished edges that promote edge toughness, post-coat treatment that reduces depth-of-cut notching, and fine-grained alumina layer that enhances coating integrity at higher cutting speeds.

Ideal Industries, Inc.
Sycamore, IL 60178
Mar 23, 2009 Offering alternative to knockouts or bi-metal hole saws, TKO(TM) Hole Cutters incorporate SmoothStart(TM) pilot drill that guides TKO into sheet metal to yield smooth, burr-free holes while preventing damage to precision-ground carbide teeth. Integral arbor assures control, while built-in flange avoids over-drilling beyond sheet metal, and ejection spring cleanly ejects slugs. Designed to fit any standard drill, cutters come in range of sizes from ¾-2½ in.

Techno, Inc. - CNC Router Systems
New Hyde Park, NY 11040
Feb 05, 2009 Suited for nested-based and cabinetry applications, Nested-based Tooling Kit offers component cutters designed to create interlocking shapes needed for cabinet-/drawer-making, surface spoil boards for accelerated table planning, and route through layered materials for increased surface removal. Specific tools include one 2½ in. Surface Cutter with replaceable inserts, two 3/8 in. Compression Bits, two ¼ in. Downcut Spirals, one ¼ in. Compression Bit, and two 5 mm Boring Drill Bits.

Kennametal Inc., Advanced Materials Div.
Latrobe, PA 15650-0231
Jan 21, 2009 Mill 1-10(TM) performs all common machining applications, such as face milling, shoulder milling, pocketing, slotting, interpolating, and ramping for steels, aluminum, or exotics, all with one common insert style. Multifunctional cutter bodies come in straight flute and helical flute styles; end mills are offered with cylindrical shanks in 3 lengths, Weldon shanks, or as a screw-on style head. Inserts, offered with 6 geometries, feature super positive cutting rake and integrated wiper facet.

Kyocera Industrial Ceramics Corp., Industrial Ceramic Products Group
Mountain Home, NC 28758
Dec 05, 2008 Equipped with internal screw-clamp holder for optimal chip evacuation, SIGE Swiss Cutting Tool System uses GER-M type insert with 3D molded chipbreaker for chip control, and GER-A type insert with 8 mm cutting diameter and 2-edge design. PR1025 PVD coated carbide material provides stable machining and extends tool life. Cermet and other coated-carbide grades are also available.

Cornerstone Automation Systems, Inc.
Prosper, TX 75078
Nov 25, 2008 Designed to automatically index full cases or bags, cut tops, remove contents, and dispose of box and/or lining, ABOT ACE can pour many types of contents in controlled flow at varying levels up to 9 ft. System can empty contents into hoppers, bins, super sacks, and conveyors. Rated IP67 for wash-down capability, food-grade system is suited for mixing ingredients and depalletizing/repalletizing cases, as well as other food and custom solutions.

The Eraser Company, Inc.
Syracuse, NY 13221
Nov 20, 2008 Microprocessor-controlled MMC200 cuts round or flat material up to 3.94 in. wide and 5/8 in. thick and can be programmed to cut any length (in. or mm), with 1% or better tolerance. It is also programmable for up to 99 batches and 10 fixed feed rates. MMC200 is rated to cut up to 7,592, 2-in. pieces/hr through makerials such as copper wire and cable, silver solder, power cords, cellophane, fiberglass sleeving, latex, fabrics, belting, flat and ribbon cable, strapping, hosing and tubing.

Bosch Power Tools & Accessories
Mt. Prospect, IL 60056
Sep 24, 2008 Powered via 12 V Max Litheon(TM) battery system, PS50 Multi-X(TM) uses modular accessories to achieve multifunctional operation with tool change times down to 60 sec. Included adaptor enables use of Dremel, Fein, or Proxxon accessories. Weighing 2.2 lb, multi-purpose oscillating tool features 240° adjustable tool holder; variable speed dial (5,000-20,000 rpm); and ergonomically designed chassis that has soft grip surface with 6.88 in. circumference for optimal maneuverability.

Onsrud Cutter, LP
Libertyville, IL 60048
Jul 21, 2008 Allowing chatter free machining at high RPM and on heavy cuts, End Mills consist of 2 and 3 flute tools for roughing and finishing applications with large selection of corner radii and neck and flute lengths. For machining centers with coolant through spindle capabilities, flute tools with coolant through design directs coolant at cutting edge. Coolant provides lubricant, dissipates heat, and clears chips.

Metabo Corp.
West Chester, PA 19380 4243
Jul 08, 2008 Measuring 4½ in., Model W8-115 Quick Angle Grinder features cool flow technology with repositioned brushes for unrestricted airflow. It has 8.0 A motor with 800 W of power, 19.5 in./lb of torque, and no-load speed of 10,000 rpm. Weighing 6.2 lb, tool includes double lipped labyrinth sealed bearings, winding protection grid, epoxy coated windings, racket and dual grip zones for ergonomic handling, anti-vibration side handle, and Quick tool-less wheel change system.

Emerson Electric Co.
St. Louis, MO 63136 8506
Jun 20, 2008 Though specifically designed for use on stainless steel, Model 35S Tubing Cutter cuts copper, steel, and aluminum tubing. It features ergonomic X-CEL knob and roller bearings that minimize friction while optimizing cutting speed. Constructed of hardened steel, Models 227S and 223S inner-outer reamers include integrated measurement tools. Model 227S features 45 cutting edges to allow for inner reaming and outer deburring or beveling of ½-2 in. tubing, while Model 223S has 36 cutting edges.

Kennametal, Inc.
Latrobe, PA 15650-0231
May 15, 2008 KC9225(TM) inserts reduce chip hammering and built-up edge conditions, preventing insert damage in applications demanding continuous to lightly interrupted cuts at high cutting speeds. Deformation resistance combined with sharp cutting edges makes units suitable for machining austenitic stainless steels, when machining at speeds in excess of 550 sfm. Applications include medical and food industries, flange manufacturing, chemical industry, and oil and petrochemical businesses.

Aven, Inc.
Ann Arbor, MI 48108
Apr 28, 2008 Measuring 6.5 in. long, Model 11080 features soft grip handle and stainless steel blades with HRC 54 hardness. Notched blade prevents material from slipping, and scissors can cut through aluminum and copper sheets up to 0.5 mm thick, plastic plate and PET up to 1.0 mm thick, and braided wire up to 1.5 mm dia. U-type blade holds items such as copper wire, cabtire cord, and various types of cotton braided and insulated cords, up to 1.5 mm dia, firmly in place to produce clean cut.

Greenlee Textron, Inc.
Rockford, IL 61109
Apr 18, 2008 ETS12 can be used to cut mild steel products such as bolts, threaded rod, solid hasp and cable hasp one-time locks, and shipping container seals. When cut is complete, ram automatically retracts to be ready for next cut, with 100 cuts per battery charge. Compact tool is 14 3/8 in. long with cutting head that rotates 350° and includes 2 batteries. Charger and molded carrying case is also included.