Durham Manufacturing Company, The
Durham, CT 06422-2108
Jun 09, 2006 All-welded, Extra Heavy-Duty Workbenches feature 3/16 in. thick steel top surface with smooth radiused edges. Angle iron legs are 2 x 2 x ¼ in. with 3 x 3 x ¼ in. footpads pre-drilled for floor lagging. Under-table angle iron reinforcements and 3/16 in. corner gussets disperse weight for optimal support. Fabricated of 12 gauge steel, lower shelf is rated at 500 lb capacity. Three models measure 30 x 48, 36 x 60, and 36 x 72 in. All are 34 in. high.

Stanley Vidmar
Allentown, PA 18105 1151
Jun 02, 2006 Built around modular drawer cabinet and laminate top, Shipping/Receiving Workbench can be tailored to suit customer. Set at 36½ in. high, top is 90 in. long, providing room for weighing, packing, and labeling. Drawer cabinet comes with roll-out shelf at top drawer position, providing additional surface for writing, packing, or staging, and can be locked in open position while in use. All drawers have 100% extension slides, and can be locked separately.

Gerbig Engineering Co.
New Brighton, MN 55112
May 03, 2006 Offered in 4, 6, and 8 ft lengths, AireCell Class 10,000 clean room workstation is designed to be positioned end-to-end with electrical and pneumatics running station-to-station. Product is double sided so that clean air is distributed in 2 directions, optimizing clean room space utilization. Particle counts are near 100 particles/ft³ when used within class 10,000 environment and typically less than 4,000/ft³ when used in office environment.

Clean Air Products Clean Air Systems Div.
Minneapolis, MN 55445 1828
Apr 25, 2006 With typical sound level of 65 dbA, Series 303 is designed for quiet operation and has open front work area for placement in front of equipment. HEPA filters provide horizontal laminar flow air that washes out particulates and prevents contamination from entering clean work zone. Featuring all-metal construction with Vinclad exterior, benches include 2 fluorescent lamps, clear polycarbonate hood, and HEPA FLEX duct system to provide air flow from blower to HEPA filter.

Lista International Corp.
Holliston, MA 01746
Mar 22, 2006 Offered as stationary or mobile workbench, ergonomic Arlink® 7000 can be configured to meet user and application requirements with selection of storage, shelving, lighting, and power beam accessories. Worksurface options include plastic laminate, static dissipative laminate, butcher block, stainless steel, and galvanized steel. Able to support 1,000 lb, workbenches have leg extenders that allow for 2 in. incremental adjustment of worksurface height from 30-36 in.

Production Basics, Inc.
Watertown, MA 02472
Mar 09, 2006 Finished in epoxy powder coat that resists chips and scratches, C-Leg and RTW workstation kits are available with green frame finish for use in lead-free areas of manufacturing facilities. C-Leg Station features cantilevered leg with integrated back frame, and RTW Table is basic 4-post work table. Both workbench styles have 750 lb weight capacity and are compatible with variety of ergonomic accessories for above and below work surface.

Stanley Vidmar
Allentown, PA 18105 1151
Feb 24, 2006 Automotive Technician's Center combines drawer storage, bulk storage, and work benching for up to 4 workers and tools. It consists of wall-mounted overhead cabinets and free-standing or wall-mounted base with any combination of cabinets, drawers, or compartments for hose reels and cords. Available in 200 or 400 lb capacities, full-extension drawer slides let users view entire contents of each drawer. Work surface choices include hardwood, stainless steel, or painted steel.

SteelHead Design, Inc.
La Mesa, CA 91944-0077
Feb 14, 2006 Constructed with 16-gauge stainless steel or powder-coated steel, fully welded MTech(TM) System offers storage and workspace solution that can be reconfigured to meet changing needs. Cabinets are available with full-extension drawers and slide-out shelves with ball-bearing slides for secure storage of parts and tools as well as computers and electronic equipment. System components also include workbenches, tables, and stackable cabinets.

TalkSwitch
Ottawa   Canada
Feb 06, 2006 Model TS-600 single-line analog desktop telephone set features 7.4 sq in. LCD display, business quality speakerphone and single-cord connectivity. It is suitable for multi-locations businesses with up to 32 telephone users per location.

Eagle MHC
Clayton, DE 19938
Oct 13, 2005 Providing users with customizable functionality in work areas, 16-gauge Type 304 Stainless Steel Countertops resist wide range of chemicals and corrosives. Standard models are 30 in. wide and come in lengths from 35-144 in. All feature square or boxed-marine front edges. Backsplashes are available with turndown and z-clips. Both standard and customized units are suited for healthcare establishments, cleanroom operations, and laboratories.

D-BOX Technologies, Inc.
Longueuil J4G 1R7  Canada
Oct 05, 2005 Synchronized on 3 separate axis points with onscreen action and sound, Quest(TM) X3ME replicates front/back, left/right, and up/down motion via use of 3 SynDrive(TM) motorized actuators. Plug-and-play product, covered in 100% premium leather, has 2-stage motorized wall-hugger recliner mechanism and frame fabricated from hardwood solids and 13-ply European hardwood plywood. Actuators deliver up 2 Gs of acceleration to viewer and provide up to 1.5 in. of vertical travel.

BioFit Engineered Products
Waterville, OH 43566 0109
Sep 28, 2005 Mounted to wall or other solid vertical surface, BioFit 1Y Series provides functional seating for tight workstation areas. Stool is mobile until person sits on seat, thereby putting seat base in contact with floor. Made of 18 ga steel with formed flange and no sharp edges, seat is 13 in. in diameter and can be adjusted from 22¾-28 in. from floor. Standard distance from wall to outside edge of seat is 20¾ in. Two-bar frame is 1 1/8 in. dia, 16 ga steel tubing.

Stanley Vidmar
Allentown, PA 18105 1151
Sep 13, 2005 Personal Computer Cabinet provides secure, stand-up workstation that protects against airborne dust and accidents caused by material movement. With enough room for PC, monitor, printer, and stack of manuals, product incorporates keyboard drawer and sliding equipment shelf with 400 lb capacity. Features include retractable, locking top, and bottom flip-up doors; 115 V axial cooling fan; and pair of 4-receptacle electrical outlet strips.

Creform Corp.
Greer, SC 29652-0830
Jul 26, 2005 Constructed from Creform® System of pipes and joints, portable Kaizen Work Shop adapts to needs of various industries. Carts are available in 2 designs: 4 x 8 ft workbench-type top surface with storage for 8 ft long pipe sections and bins for holding joints and hardware accessories, or narrower configuration for maneuverability and table-like top. Carts can be manually pushed or pulled via powered tugger vehicles by integral hitch.

Arlink Inc.
Burlington, ON L7R 3Y2  Canada
Jul 19, 2005 Available as stationary or mobile workbench, modular Series 7000 can be tailored to suit requirements of both user and application. It can be configured with legs and/or cabinet pedestals, and is capable of supporting 1,000 lb, evenly distributed. Drawers provide organized storage for parts, tools, components, and accessories. Work surface options include plastic laminate, static dissipative laminate, butcher block, stainless steel, and satin coat steel.

Unidex
Warsaw, NY 14569
Jun 30, 2005 Suited for sanitary or corrosive working environments, AHW Series adjusts working height with 4 ips lifting speed to accommodate work positioning and ergonomic requirements. Air/oil hydraulic lift system ensures workbench functions smoothly, regardless of uneven weight distribution. Model AHW2718 has 18 in. lift stroke from 27–45 in. high, while AHW9536 has 36 in. lift stroke from 9.5–45.5 in. Load capacity is 500 lb, and work surface measures 30 x 60 in.

Stanley Vidmar
Allentown, PA 18105 1151
Jun 09, 2005 Technical Bench System features base cabinet with 16½ x 28¼ in. footprint. Each drawer can be outfitted with partitions and dividers in variety of configurations. Unit has 200 lb capacity with full extension, ball bearing slides. Flush fronts and recessed drawer pulls help create snag-free workspace. Available in 27 7/8, 31, and 35 in. heights, bench can be finished with polyester-based powder coating or ESD protective coating.

Scandex, LLC.
Newton, MA 02459-1601
May 18, 2005 Equestrian-style Saddle Stool facilitates proper posture and is suited for personnel who reach and move around frequently at work. When sitting with legs apart and leaning at 45° angle, it creates natural S-shape alignment of spine and maintains lumbar curve, with soft normal curves in back and neck. Workers seated on Saddle Stool experience alertness, circulation to lower extremities, and minimized risk of muscular skeletal disorders.

Clean Air Products Clean Air Systems Div.
Minneapolis, MN 55445 1828
May 10, 2005 Available in sizes from 2 x 2 ft to 2 x 6 ft, Series 204 Horizontal Laminar Flow Clean Benches feature internal motorized filter unit and 3-side access to facilitate cleaning. Product is designed for installation on top of existing tabletop, with filter in rear of unit and hood on front. Provided with white painted steel housing as standard, unit is offered with optional stainless steel housing, stainless steel hood, and integrated light.

BioFit Engineered Products
Waterville, OH 43566 0109
Apr 07, 2005 Val-U-Line Chairs feature steel frame with polypropylene seat and backrest. Three models of stackable chairs with glides provide seating for meeting rooms, break rooms, offices, and cafeterias adjoining manufacturing areas. Adjustable chair, with seat height range of 17–22 in., is suited for computer workstations and comes standard with casters. Cloth upholsteries are available on height-adjustable chair and 2 stacking chair models.