Plant Furnishings & Accessories

Plant Furnishings & Accessories, Non-Industrial Products

XUV Doors for John Deere Gator increase safety on tough terrain.

November 13, 2014

Constructed of rustproof aluminum, lockable replacement doors for John Deer Gator cabs feature reinforced door frame and steel handles and door latches. Shatter-resistant acrylic lower window panels reduce risk of breakage, even amidst flying debris and other hazards, while gas shocks provide smooth operation and protect door from swinging open in windy conditions. Driver and passenger doors have window sliders to add cab ventilation and pass through ability. Read More

Material Handling & Storage, Mechanical Components & Assemblies, Plant Furnishings & Accessories

Overhead Cabinets protect and conceal hoses and reels.

November 11, 2014

Vacuum formed from white polyethylene, high-impact, ABS polymer that is stain- and corrosion-resistant, Overhead Reel Cabinets are installed to wrap around spring-driven Series 5000 and 7000 air, water, and lubrication hose reels. Units enclose reels to conceal and protect them from surrounding environment and provide aesthetic value. Cabinets are available for single mounted reel or multiple reels. Read More

Plant Furnishings & Accessories, Electrical Equipment & Systems

Hinged Cover protects electrical units from damage.

November 6, 2014

Comprising cover, mounting frame, and piano style hinge, STI-6519 Single-Gang Protective Cover is molded of clear polycarbonate, protecting pushbuttons, electrical switches, digital keypads, electrical outlets, pull stations, biometrics, and volume/lighting controls against vandalism and accidental damage. Frame mounts directly through product mounting plate to electrical box, eliminating need to drill additional holes in wall. Read More

Plant Furnishings & Accessories

Modular Workstations target open area labs.

November 5, 2014

Purpose-built for laboratory deployment, Dimension 4-L Workstations begin with Starter Unit and enable users to build out work area lines, cells, and islands with Add-on Units. Systems feature high-strength steel framework and Reagent Rack type shelving units enclosed on 4 sides, all with baked-on, chemical- and chip-resistant powder coat paint. Available with upright heights from 60–84 in., workstations offer lengths from 48–72 in. and provide choice of 30 or 36 in. work surface depths. Read More

Mechanical Components & Assemblies, Plant Furnishings & Accessories, Electronic Components & Devices

Plastic Electronics Enclosure offers NEMA 4X and IP66 ratings.

October 29, 2014

Measuring 4.63 x 4.63 x 2.36 in. and designed for outdoor applications, Model HD44 is available in both gray and black UV-stabilized polycarbonate with silicone gasket seal and UL94V-0 flame rating. Gasket protects internal components from dust, dirt, and water. Additional features include molded on surface-mounting flanges, plastic PCB mounting bosses, stainless steel screws for corrosion resistance, and brass inserts for cover on/off convenience. Read More

Material Handling & Storage, Plant Furnishings & Accessories, Electronic Components & Devices

Equipment Rack Enclosures feature 1,000 lb load capacity.

October 28, 2014

Featuring welded steel construction and black powder coat finish, Models EREN-18, EREN-27, and EREN-42E offer 18, 27, and 42 rack spaces, respectively. Portable units come with integrated cooling fans and lockable, removable side panels, allowing for organization of multiple electronic components while protecting against thermal issues, damage, and theft. Working with 19 in. rack equipment, enclosures have tempered glass front door, double swing steel rear door, and vented top and bottom. Read More

Plant Furnishings & Accessories

Steel Carriage Garage Doors improve residential thermal efficiency.

October 20, 2014

With available Kingston and Westfield designs, each offered in arched and square top choices, Carriage House Steel Collection Model 6600 comes in 22 designs and in 5 colors. Doors are constructed with 2 layers of steel for sturdiness and feature smooth DecaTrim II overlays treated to resist termites and fungal decay. While foamed-in-place polyurethane insulation delivers door section R-value of 12.12, tongue-and-groove section joints help prevent wind and precipitation ingress. Read More

Mechanical Components & Assemblies, Plant Furnishings & Accessories

Rolling Door/Grille Entry Systems serve high-traffic areas.

October 20, 2014

Advanced Rolling Door 800/800C ADV, with curtain composed of interlocking metal slats, and springless Advanced Rolling Grille 600 ADV are designed for accelerated opening and closing. Along with drop stop device that eliminates uncontrolled downward curtain travel, safety features include photoelectric sensors and self-monitoring, 2-wire, electric fail-safe sensing edges that respectively reverse downward motion of door when object enters invisible beam's path or upon impact. Read More

Plant Furnishings & Accessories, Electronic Components & Devices

Portable Enclosures house and protect 19. rack equipment.

October 7, 2014

EREN-18, EREN-27, and EREN-42E feature fully welded steel construction with black powder coat finish and respectively offer 18, 27, and 42 rack spaces. Each unit allows for organization of multiple electronic components while also protecting them from thermal issues as well as damage or theft. Along with integrated cooling fans and lockable, removable side panels, features include 1,000 lb load capacity, casters and leveling feet, and rails with standard 10-32 threading.
Read More

Plant Furnishings & Accessories, Thermal & Heating Equipment

Venturi-Style Electric Heater enhances air curtain capabilties.

October 2, 2014

Employing hemispherical heating element array, 8–70 kW VTH uses Venturi effect to draw air through heating element via blower inlet before it enters discharge airstream. Discharge airstream velocity remains unobstructed in near 100% efficient heat transfer, full laminar pattern, for optimum aerodynamic performance. This creates environment-separating air seal across any open doorway while providing auxiliary heat as needed. Available voltages include 208, 240, 480, and 575 V. Read More

Plant Furnishings & Accessories

In-Ground Door Operator supports stack pressure monitoring.

September 23, 2014

Designed for heavy-duty applications, NB-500-LE-OPCON in-floor, springless, power open/power close door operator is rated for doors weighing up to 2,500 lb or operating torque of 1,000 lb-in. UL50 TYPE 4, In-Floor Underground Conversion is also UL 325 Listed. Product provides flexibility for heavier doors to resist stack pressure or wind loads, yet remain compliant with ANSI 156.19 when required. Stack Pressure Monitoring (SPM) is optional on all low energy models. Read More

Plant Furnishings & Accessories, Materials & Material Processing

Workstation Covers protect products from ESD.

September 23, 2014

Made of polyester fabric with minimum 9% carbon conductive nylon fibers, ESD Workstation Covers protect products from ESD, dust, and other contaminants. Surface resistance is 1 x 105 < 1 x 107 Ω RTT to attenuate electrostatic fields and electrostatic discharges. Available in 18 x 24, 36 x 48, and 48 x 48 in. sizes, covers feature built-in continuous and consistent charge dissipation. Attached 3/8 in. snap allows covers to be grounded to workstation's ground point. Read More

Plant Furnishings & Accessories

Wind Load Garage Doors help protect coastal homes, businesses.

September 22, 2014

Constructed of steel and polyurethane insulation, impact-resistant wind load garage doors offer thermal efficiency and storm protection. Wind load ratings, depending on door size, reach up to +64.00/-72.00 psf. WindStorm™ doors protect against damage from high wind. Commercial doors (Thermacore® models 515/525) and residential doors (Thermacore series 5745/5765, Courtyard Collection® series 7565) come in range of panel styles. Calculated R-value, depending on model, is 12.12 or 16.22. Read More

Food Processing & Preparation, Plant Furnishings & Accessories, Thermal & Heating Equipment, Non-Industrial Products

Protective Covers fit half size bakery racks.

September 19, 2014

Protecto® SUPRO-14-EC-1/2 covers half sized bakery racks, which stand 38 in. tall. Constructed from clear, .010 in. thick, phthalate-free, tin-free, lead-free, and heavy metal-free PVC, cover separates contents from adverse environmental factors and helps prevent food spoilage. Read More

Fluid & Gas Flow Equipment, Plant Furnishings & Accessories, Electronic Components & Devices

Enclosure Vent facilitates heat and moisture dissipation.

September 18, 2014

Suited for outdoor use, IPV Series PC/PC Wide Opening External Vent allows circulation of air while protecting againt rain water and falling debris. Both 2.91 x 2.91 x 1.1 in. and 3.95 x 3.95 x 1.25 in. models, constructed of gray polycarbonate plastic and 10% fiberglass, withstand exposure to UV light and water in accordance with UL 746C. Also able to be used indoors, product features continuous gasket between enclosure and vent and is designed to provide IP32 protection.
Read More

Material Handling & Storage, Plant Furnishings & Accessories

Storage Systems complement professional, residential requirements.

September 15, 2014

Comprising residential and professional storage and workbench products for any professional or residential garage setting, Collector's Edition Garage System includes heavy-duty, 14 and 16 gauge steel, all-welded cabinets that range up to 48 in. wide and 84 in. high. Features include 3-point locking mechanisms, optional drawers, bins, and shelves. Workbenches come in 24 or 48 in. widths and with multiple configurations of drawers, doors, and tops as well as with or without wheels. Read More

Plant Furnishings & Accessories, Electronic Components & Devices

Polycarbonate Enclosure withstands outdoor environments.

September 11, 2014

Suited for outdoor applications, 5.50 x 4.13 x 2.44 in. ML-45F is molded of light gray UV-stabilized polycarbonate and UL Listed to 508A as well as NEMA Type 1/2/4/4X/12/13 specifications. Opaque and clear covers are available, and form-fitted gasket makes enclosure suited for use in diverse environmental conditions. Along with silicone gasket seal and UL94V-0 flame rating, features include molded on surface-mounting flanges, plastic PCB mounting bosses, and stainless steel screws. Read More

Retail & Sales Equipment, Plant Furnishings & Accessories

Storefront System offers hurricane impact resistance.

September 11, 2014

Engineered for hurricane resistance on low- to mid-rise commercial buildings, 34000 Series has been tested to Florida Building Code TAS 201, 202, and 203 standards and is compliant with ASTM E 1886/1996 Wind Zone 4 impact/cyclic criteria. Series features 2½ x 5 in. flush-glazed system and impact-resistant screw-spline framing, glazed with 1 5/16 in. laminated glass positioned in center of frame. Non-thermal E34000 Series and T34000 Series with poured-and-debridged thermal option are available. Read More

Plant Furnishings & Accessories, Electronic Components & Devices

Electronic Enclosures combine plastic and aluminum.

September 5, 2014

Available in 36 models, SYNERGY Electronic Enclosures are suitable for handheld, desktop, and wall mounted equipment. Glass reinforced polyamide pillars snap into recessed top panel, locate assembly extrusion, and are fixed to bottom part with 4 stainless steel Torx T10 anti-tamper screws. Top and base sections are manufactured from UV-resistant ASA+PC-FR, while main body section is extruded from AlMgSi 0.5 aluminum, blasted with glass beads, and anodized in silver for optimized surface finish. Read More

Computer Hardware & Peripherals, Plant Furnishings & Accessories

Ergonomic Workstation offers electronic height adjustment.

September 2, 2014

With Ergo Tier ARC, users can set focal length of monitors and swing them left or right for viewing in different ergonomic sit-stand or collaboration positions. Workstation is height-adjustable from 28–47 in. from floor and has independent electronic adjustment of monitor platform height. Monitors are mounted in arc shape to enable viewing within visual reach envelope of user and are adjusted with handlebars. Offering table widths from 48–96 in., workstation has five 4 in. casters for mobility. Read More