Rohde & Schwarz GmbH & Co      Germany
May 14, 2013 Offering 12.1 in. touchscreen interface, MultiView function and MSRA function, R&S FSW50 signal and spectrum analyzer is suited for use in development, testing, verification, and production of transmitters and components such as those used in radar applications and satellite and military communications systems. Use of harmonic mixers enables extension of frequency range to 110 GHz. Analysis bandwidth of 320 MHz allows demodulation of wideband signals, such as radar chirps, up to 50 GHz.

Rohde & Schwarz GmbH & Co      Germany
Apr 26, 2013 With FSW-B71 option, FSW Signal and Spectrum Analyzer provides analog baseband inputs covering bandwidth of 80 MHz for I and Q signals. Feature is beneficial to developers of transmitter modules for complex signals such as WLAN IEEE 802.11ac and LTE if different chipsets are used to generate baseband signal and convert it to RF. Since signal can be tested in baseband prior to conversion to RF, developers can characterize entire signal chain using single device.

Rohde & Schwarz GmbH & Co      Germany
Mar 11, 2013 Respectively covering 9 kHz to 13.6 GHz and 20 GHz ranges, R&S FSH13 and R&S FSH20 support all common wireless communications standards and can also be used for microwave applications. Measurement functions can be used to analyze transmit signals and interference, measure performance, and more; complete sweep up to 13.6 GHz takes 800 msec; sensitivity is -162 dBm typ from 8–13.6 GHz; and accuracy is 1 dB typ (>8 GHz). Portable units run for up to 4.5 hr on replaceable battery.

Rohde & Schwarz GmbH & Co      Germany
Mar 05, 2013 Supporting bandwidth up to 160 MHz, R&S SMBV100A Vector Signal Generator enables developers to run receiver tests on individual chipsets, receivers, and terminals, while R&S FSV Signal and Spectrum Analyzer lets developers of components and modules for IEEE 802.11ac perform spectral measurements and modulation analyses. Both instruments cover not only WLAN but also all important standards such as GSM/EDGE, 3GPP WCDMA, HSPA, LTE, NFC, and Bluetooth®.

EasySYNC Ltd,    Hillsboro, OR 97124-5803
Mar 01, 2013 Combining oscilloscope, data logger, spectrum analyzer, voltmeter, and frequency meter in single product, dual-channel Model DS60M10 offers 10-/8-bit data streaming simultaneously on both channels. Oscilloscope supports speeds of 60 Hz, while data logger provides sampling rate up to 1 KS/s, and analog inputs of voltmeter have max range of ±50 Vdc. Measuring 116 x 30 x 100 mm, USB-based unit draws 500 mA from standard interface port, eliminating need to connect to any other power source.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Feb 15, 2013 Real-time spectrum analysis (RTSA) for PXA X-Series signal analyzers helps system developers and signal analysts see, capture, and comprehend elusive signals. When configured for real-time spectrum analysis, PXA can detect intermittent signals with durations as short as 3.57 µsec. Solution provides 75 dB spurious-free dynamic range across analysis bandwidths up to 160 MHz, sensitivity of -157 dBm at 10 GHz (no preamp), and ability to vary resolution bandwidth within measurement span.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Feb 13, 2013 Suited for budget-constrained applications, Model N9322C features typical -152 dBm DANL for viewing low-level signals clearly, and ±0.1 ppm annual aging rate, which minimizes frequency drift. Seven user-definable soft keys provide quick access to 7 most frequently used measurement setups, while optional 7 GHz tracking generator with built-in VSWR bridge supports transmission and reflection measurements. With demodulation mode, users gain more insight into AM, FM, ASK, and FSK signal analysis.

Tektronix, Inc.    Beaverton, OR 97077
Jan 28, 2013 Allowing engineers to analyze captured data across domains at any time using correlated markers, RSA5000 Series includes 26.5 and 15 GHz models with 110 MHz bandwidth option that addresses frequency range requirements of wireless communications standards. DPX spectrum display offers intuitive, live color view of signal transients as they change over time in frequency domain, and set of triggers allows troubleshooting of digitally implemented RF systems.

Anritsu Co.    Morgan Hill, CA 95046
Dec 21, 2012 Equipped with 8.4 in. touchscreen interface, Spectrum Master™ MS2720T Series provides continuous frequency coverage from 9 kHz to 43 GHz. Sweep mode allows user to set resolution bandwidth from 30 kHz to 10 MHz with minimal effect on sweep speed. Analyzers feature dynamic range of >106 dB in 1 Hz RBW, DANL of -163 dBm in 1 Hz RBW, and phase noise of -112 dBm at 10 kHz offset at 1 GHz. Full-band tracking generators that cover 100 kHz to 9, 13, or 20 GHz are available.

Megger    Norristown, PA 19401
Dec 11, 2012 Incorporating ¼ VGA display with LED backlight, Model HT1000/2 certifies physical layer of telephone network and its xDSL transmission characteristics, as well as HPNA data/video networks. Standard tests include: AC/DC voltage, leakage, noise, power influence, and longitudinal balance. To facilitate fault location, handheld instrument also incorporates dual-trace TDR with range up to 16,000 m. Spectrum analyzer covers frequencies from 20 kHz to 33 MHz and noise amplitudes from -90 dBm to +10 dBm.

Rohde & Schwarz GmbH & Co      Germany
Nov 14, 2012 Covering 2 Hz to 43.5 GHz frequency range, Model FSW43 features measurement speed up to 1,000 sweeps/s. With phase noise of –117 dBc (Hz) at 40 GHz and 10 kHz carrier offset, analyzer delivers high-sensitivity measurements even close to carrier. Broad analysis bandwidth up to 160 MHz enables analyzer to measure wideband, hopping, and chirp signals which occur in radar applications. Equipped with FSW-B21 option, frequency range can be extended to 110 GHz using external mixers.

National Instruments Corp.    Austin, TX 78759-3504
Nov 13, 2012 With frequency range of 20 Hz to 7 GHz and up to 50 MHz real-time bandwidth, NI PXIe-5667 addresses radio monitoring, interference detection, spectrum regulation, and related applications in line with ITU recommendations. Coupled with NI FlexRIO and the NI LabVIEW FPGA Module, receiver can perform real-time analysis of RF signals such as continuous spectrum monitoring, spectrogram, and advanced signal processing in FPGA hardware without latency of moving data to/from host controller or PC.

GAO Instruments Inc.,    Toronto   Canada
Nov 06, 2012 Using locked-phase local and all-digitized medium frequency processing technologies, Model A0070002 operates over frequency range of 9 kHz to 3 GHz with resolution bandwidth of 100 Hz to 1 MHz at accuracy of ±25% (1 MHz) or ± 10% (<1 MHz). Non-volatile memory can store 200 groups of measurement data, which can be downloaded via RS232 interface. Equipped with 6 in. VGA TFT color LCD, analyzer operates from rechargeable lithium battery for up to 4 hours.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 05, 2012

Rugged 20 GHz N9344C, 13.6 GHz N9343C, and 7 GHz N9342C handheld spectrum analyzers are designed for in-field applications like instrument remote control and peak power measurement of pulsed signals. Analyzers feature RRC filter for measuring LTE/W-CDMA channel power and adjacent channel power ratio. Password-controlled keypad lock/unlock and socket and telnet connection for SCPI are included. Products also feature channel standards for LTE, Wi-Fi, and WiMAX™.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Sep 06, 2012 Available in frequencies of 9, 14, 18, or 26.5 GHz, FieldFox Analyzers can be configured as cable-and-antenna analyzers, spectrum analyzers, vector network analyzers, or combination units. VNAs provide 2-port S-parameter measurements with trace noise of ±0.004 dB and dynamic range of 94 dB. Spectrum analyzers provide amplitude accuracy of ±0.5 dB at power-up, with no warm-up required. For harsh environments, units have sealed enclosure, compliant with MIL-PRF-28800F Class 2 requirements.

Southern Photonics Ltd    Auckland 1010  New Zealand
Sep 06, 2012 Designed for use across commonly used discrete wavelength ranges of 1, 1.5, and 2 micron, OSA-G Series delivers core functionality needed for production engineering and manufacturing applications. Grating-based optical spectrum analyzer (OSA) solution is engineered to capture high-resolution spectral data using platform that supports customization during assembly process.

Aeroflex    Irvine, CA 92618
Aug 22, 2012 Designed for Professional Mobile Radio, public safety, and other land mobile radio applications, Model 3550 isolates problems and assesses performance in AM/FM radios, with options for P25, DMR, NXDN(TM), and dPMR radio systems. Internal battery enables 4.5 hr of continuous operation in temperatures from -0 to +50°C. Equipped with -140 dBm spectrum analyzer, test system features phase noise of -95 dBc/Hz, RF signal generator level accuracy of ±1.5 dB, and FM deviation meter accuracy of 4%.

Rohde & Schwarz GmbH & Co      Germany
Aug 13, 2012 Available in 2 models for frequencies ranging from 10 Hz to 3 GHz or 7 GHz, ESR Test Receiver provides comprehensive diagnostic tools such as spectrogram display, real-time spectrum analysis, and IF analysis. With time domain scan, standard-compliant EMC measurements which used to take hours can now be completed in seconds. Spectrogram function seamlessly displays analyzed spectrum over time and records measurements for up to 5 hours, allowing developers to detect sporadic interferers.

Rohde & Schwarz GmbH & Co      Germany
Jul 05, 2012 Providing integrated demodulation bandwidth of 160 MHz, FSW-K91ac option enables FSW Signal and Spectrum Analyzer to record and demodulate full bandwidth of WLAN signal in line with IEEE 802.11ac. IEEE 802.11ac standard requires error vector magnitude of -32 dB for 256QAM modulation, and FSW analyzer provides EVM of less than -45 dB. Equipped with 12.1 in. MultiView touchscreen, analyzer lets users simultaneously view multiple measurements and offers measurement speed of less than 100 ms/measurement.

Rigol Technologies, USA Inc.    Oakwood Village, OH 44146
Jul 03, 2012 Covering frequency range of 9 kHz to 1.5 GHz, Model DSA815 has typical displayed average noise level of -135 dBm, offset phase noise of -80 dBc/Hz at 10 kHz, and total amplitude uncertainty of less than 1.5 dB. Analyzer includes AM/FM demodulation and preamplifier, plus optional EMI filter, quasi-peak detector kit, and 1.5 GHz tracking generator. With minimum resolution bandwidth of 100 Hz, digital IF filter facilitates ability to distinguish between small signals close in frequency.