Gauge & Sensor Isolators

Mounting & Attaching Products, Sensors, Monitors & Transducers

Retractable Sensor Assemblies eliminate process interruption.

February 4, 2016

With Cleanfit CPA875 and CPA871 sensor assemblies, pH, ORP, oxygen, and NIR sensors can be installed or removed during operation. By moving sensor from measuring position to service position, retractable assemblies allow sensor to be cleaned, calibrated, or replaced without interrupting process. Cleanfit CPA875 is intended for use in food, pharmaceutical, life sciences, and specialty chemical applications, while CPA871 is suited for water/wastewater and general chemical industries. Read More

Electrical Equipment & Systems, Material Handling & Storage, Mounting & Attaching Products, Test & Measuring Instruments

How Sensor Accessories Will Improve Your System

November 2, 2015

Locon Sensor Systems helps companies in a wide range of industries integrate sensors that best suit their applications. From businesses that need sensors to perform in the harshest of environments, to projects requiring a custom fit, Locon Sensor Systems can provide your business with nearly any type of solution. In fact, Locon Sensor Systems' engineering and sales team works closely with... Read More

Mechanical Components & Assemblies, Mounting & Attaching Products

Runtastic Selects QuickLogic' Sensor Hub and SenseMe Algorithm Library for Its New Runtastic Moment Wearable

September 15, 2015

  • QuickLogic's ArcticLink 3 S2 Sensor Hub enables the Runtastic Moment to deliver up to six months of battery life. 
  • QuickLogic's comprehensive SenseMe Algorithm Library delivers world-class accuracy while optimizing battery life. 
Sunnyvale, CA – QuickLogic Corporation® (NASDAQ: QUIK), the innovator of ultra-low power programmable sensor... Read More

Computer Hardware & Peripherals, Mounting & Attaching Products

Low Power Programmable Sensor Hub enhances wearables, smartphones.

April 21, 2015

ArcticLink® 3 S2 LP, featuring active power consumption of 75 µW (68 µA @ 1.1V), extends battery life for smartphone and wearable devices. Simultaneously, support for SenseMe&trade; sensor algorithm library as well as OEM-developed and third-party algorithms enables designers to add features/capabilities and extend battery life of those same devices.<br /> Read More

Mounting & Attaching Products

Micromem Demonstrates UAV Installation of Power Line Monitoring Mounting System

March 10, 2015

TORONTO and NEW YORK - Micromem Technologies Inc. ("Micromem") ("the Company") (CSE:MRM) (OTCQX:MMTIF) through its wholly owned subsidiary, Micromem Applied Sensor Technologies Inc. (MAST), is pleased to announce that it has successfully demonstrated the installation of the mounting system that will be used to house its patent pending Power Line Condition Monitoring sensor suite using an... Read More

Controls & Controllers, Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products, Sensors, Monitors & Transducers

Bracket Assemblies aid mounting of speed sensors.

June 25, 2013

Model EZ-3/4 in. Easy Mount Bracket Assemblies are compatible with Electro-Sensors 906 and 932, while EZ-18 mm assemblies work with Electro-Sensors ST420, ST420-LT, ST420-DI, Series 18, and SpeedTalker DN-BH. Designed for applications up to 300 rpm, both units mount directly to tapped shaft. Pulser Disc within CPVC housing provides 8 pulses/revolution. Assemblies are used with speed sensors to generate pulses or 4&ndash;20 mA signals for use with display meters, speed switches, or PLC inputs. Read More

Computer Hardware & Peripherals, Mounting & Attaching Products, Services, Test & Measuring Instruments, Vision Systems

Universal Mount attaches weather sensors to towers/masts.

April 11, 2013

Vertically or horizontally, universal mounting adapter can be used to attach weather sensors to existing towers or alternate masts &ndash; even those with multiple instruments. Product is constructed of aluminum and includes three clamps for masts up to 3 in. dia. Read More

Mounting & Attaching Products

Photoelectric Sensor Mounts offer multi-axis flexibility.

October 13, 2010

Facilitating alignment and positioning for quick changeover, OMH-RL31-06 Mounting Brackets provide means to flexibly mount Pepperl+Fuchs Series 31 photoelectric sensors in multi-axis alignment applications. Products feature protective shroud, which covers 2 sides of sensor housing, and half-clamp mounting in which bracket fastens on 0.5 in. dia rod or bolt. Once fastened, half-clamp can be rotated 360° around rod or bolt to best align sensor to application requirements. Read More

Mounting & Attaching Products

Photoelectric Sensor Mounting Brackets provide protection features.

July 30, 2010

Designed for use with series 28 and 29 photoelectric sensors, OMH-RL29-06 mounting brackets offer alignment and positioning flexibility and protective shroud that covers 2 sides of sensor housing. Fastening on 0.5 in. dia rod or bolt, bracket provides half-clamp mounting that can be rotated 360° around rod/bolt to align sensor to satisfy specific application requirements. Applications include automotive, material handling, and packaging industries. Read More

Agricultural and Farming Products, Mounting & Attaching Products, Sensors, Monitors & Transducers, Test & Measuring Instruments

Wireless Sensor Board enables precise agriculture execution.

June 29, 2010

Used with Waspmote platform, Agriculture Sensor Board enables up to 14 environmental parameters to be monitored in wireless sensor network for precise irrigation and climate control in vineyards and greenhouses. Over 10 sensors can be connected simultaneously, and Waspmote does not need to monitor values continuously. Board can thusly spend extended periods in power-saving hibernate mode, consuming 0.7 µA. Radio range for line of sight and non line of sight can be up to 12 or 6 km. Read More

Architectural and Civil Engineering Products, Material Handling & Storage, Mounting & Attaching Products, Optics & Photonics

Misumi Unveils New Posts and Clamps for Mounting of Photoelectric Sensors and CCD Cameras

February 26, 2010

Stand Posts with easy-to-read metric markings, plus rugged, secure Strut Clamps ensure precise, accurate positioning of mounted devices.<4444>(Schaumburg, IL) - Misumi USA, Inc., a subsidiary of Misumi Corporation, part of Misumi Group, Inc. (Tokyo: 9962), has introduced a series of new products to its comprehensive lines of Posts, Stands and Clamps. <4444>The new additions, which can be... Read More

Mounting & Attaching Products, Sensors, Monitors & Transducers

Photoelectric Sensors use frame adapter for installation.

November 11, 2009

With plastic frame adapter, Series 14 can be installed without screws or tools. Once snapped into adapter, sensors are inserted into 1.75 x 5.4 cm recess in steel sheet. Two plastic clamps secure adapter in cut-out and sensors are mounted tightly. Sensors cannot be readjusted or shifted accidentally, but can be dismounted for servicing. Adapter fits all Series 14 sensors, including diffuse, retro-reflective, and LED-based distance sensors. Read More

Mounting & Attaching Products

Terminal Chamber protects metal detectors.

May 1, 2009

Designed for uprox®+ sensors, integrated terminal chamber conforms to FDA requirements for washdown environments, including food and beverage industry applications. It includes removable terminals for simplified mounting using screws or cage clamps. User can select straight or 90° cable exits by rotating cover 180°. Read More

Mounting & Attaching Products

Photoelectric Sensor Bracket allows alignment flexibility.

January 21, 2008

Designed for any M18 cylindrical or snout photoelectric sensor, Model OMH-ML17-R mounts on 0.5 in. diameter rod without having to slide half-clamp from end of rod, making it suited for use on conveyor and packaging equipment. Sensor can be positioned 360° around rod as well as along length of rod, and over 100° arc on sensor bracket. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

ASI Introduces Three New M8 Sensor Distribution Boxes

February 5, 2007

Carlisle, PA - Automation Systems Interconnect, Inc. has announced the expansion of their line of sensor distribution boxes to include a range to handle the popular M8 style of connectors. The NEW M8 sensor distribution boxes are now available in a PUC and PVC cable version, a version with M12 connectors for common power connections along with sensor signals and finally a version which provides... Read More

Mounting & Attaching Products

Sensor Distribution Boxes handle M8 and M12 connectors.

October 9, 2006

Available in 4, 6, or 8 ports, with or without molded cable, Sensor Distribution Boxes make system/equipment totally modular. Molded PUR cable version is available in standard lengths of 5, 10, or 15 m. Able to perform in harsh environments, boxes can be ordered with or without LED indication for PNP or NPN sensors. Standard color is black, but boxes are also offered in green, orange, or yellow. Read More

Mechanical Power Transmission, Mounting & Attaching Products, Optics & Photonics

Position and Rate Gimbals enable smooth, accurate motion.

July 13, 2006

Suitable for directing optics, lasers, antennas, and sensors to precise pointing angles and able to accommodate up to 200 mm dia loads, AMG LP series incorporates low-profile, direct-drive rotary stages. Coupled directly to precision shafts to enable 360° continuous motion, S-series brushless, slotless servomotors feature rare-earth magnets and angular transducers. Typical line gimbal resolution ranges from 0.87-0.32 µrad with Aerotech controls. Read More

Mounting & Attaching Products

Mounts are designed for tubular proximity sensors.

April 28, 2006

Plastic injection-molded BMDC-12 and BMDC-18 Quick Mounts feature integral stop shoulder that establishes fixed reference point between the mounted sensing face and the targets that sensors detect. Sensor integration components have dual-cam design that allows tool-less sensor installation and change-out of 12 and 18 mm dia sensors. Read More

Mounting & Attaching Products, Optics & Photonics

Brackets mount and protect photoelectric sensors.

January 31, 2006

Designed to hold threaded barrel photoelectric sensor, GuardHouse(TM) brackets feature protective tabs that extend around sensor and reflector. Units incorporate adjustment slots for installation, setup, and sensor-reflector alignment. Brackets are available in Unistrut® attachment and standard models, and can be ordered as individual units or in pairs. Stainless steel units are suited for applications such as food and packaging conveyors. Read More

Mounting & Attaching Products

Mounting Bracket aligns photoelectric sensors.

January 13, 2006

Designed for use with 18 mm cylindrical photoelectric sensors, Model OMH-VL18 has 3 spring-loaded screws that can be adjusted to move sensor up and down, as well as left and right. Threaded metal bracket facilitates precise alignment, which is useful for thru-beam laser set-ups. Read More