Henkel
Rocky Hill, CT 06067
Nov 23, 2009 Formulated for printing processes, Multicore DA101 can not only handle reflow with high-lead alloys, but with lead-free based alloys as well. Product withstands temperatures of 300-330°C for high-lead reflow profiles and tolerates lead-free temperatures from 240-270°C. Delivering wetting ability to variety of surfaces, adaptable paste exhibits less than 5% void instances on average. Product's flux residue can be cleaned with off-the-shelf cleaning chemistries.

Hobart Brothers Co.
Troy, OH 45373-2900
Nov 17, 2009 Offering all-position welding capabilities, FabCO® XTREME B2, XTREME B3, and XTREME 120 operate on DCEN Direct Current Electrode Negative. XTREME B2 is suited for 1 ¼ Chrome - ½ Moly steels, while XTREME B3 deposits weld chemistry needed for 2 ¼ Chrome - 1 Moly steels. Designed to meet DNV Y69MS (H5) for welding on offshore jackup rigs, XTREME 120 wires produce welds in 120-130 ksi tensile strength range, yield strengths over 105 ksi, and Charpy impact properties of 51 lb-ft at -76°F.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Oct 08, 2009 Developed for welding applications requiring corrosion and oxidation resistance, SelectAlloy 82-AP features weld metal composition of 19% chromium, 3% manganese, 2.5% niobium, and nickel balance. It is utilized for welding alloys 600, 601, and 800 to themselves, for clad side of joints in steel clad with nickel-chromium-iron alloys and for dissimilar welding of nickel-based alloys. Electrode suits applications in wide range of temperatures as well as chloride contaminated environments.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 10, 2009 With low fume generation rates, UltraCore® 70C Gas Shielded Flux-Cored Wire optimizes cleanliness and visibility while welding. Diffusible hydrogen levels are controlled at H8 AWS classification to provide resistance to hydrogen induced cracking. Optimized bead stacking and slag removal minimize clean-up time for multi-pass welding. Wire meets requirements of structural fabrication, heavy equipment, and ship building industries.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Aug 10, 2009 Designed to meet requirements of heavy equipment, structural fabrication, and mining industries, gas-shielded UltraCore® 75C provides optimized stackability for welding thick steel sections. Basic slag system offers resistance to hydrogen induced cracking in many applications, including difficult-to-weld materials and restrained joints. Charpy V-notch test results are capable of exceeding AWS E70T-5C-JH4 impact requirements of 20 lbf-ft at -40°F.

Henkel
Rocky Hill, CT 06067
Jul 24, 2009 Suitable for high-Pb and Pb-free applications, Multicore® DA100(TM) addresses thermal requirements of smaller outline, higher functioning power semiconductor devices. It incorporates no clean, ROLO flux system and uses specific high-temperature, Pb-free alloys to offer thermal control necessary for rectifiers, power transistors, amps, and other components. Exhibiting less that 5% void instances on average, RoHS-compliant solution optimizes electrical and thermal conductivity as well as overall device reliability.

Hobart Brothers Co.
Troy, OH 45373-2900
Jun 22, 2009 Designed as general fabrication welding wire for mild or low alloy steels, FabCO® Hornet gas-shielded flux-cored welding wire can be used in all positions with either 100% CO₂ or 75% Ar/25% CO₂ shielding gas mixture. Available in 0.045, 0.052 and 1/16 in. dia, unit produces flat bead profile and suits both single- and multi-pass applications. It has typical impact strength of 75 ft-lb at -20°F when used with mixed shielding gas.

Henkel
Rocky Hill, CT 06067
Jun 08, 2009 Offering solderability over wide range of reflow profiles in both air and nitrogen, Multicore® LF700 works on Ni/Au, immersion Sn, immersion Ag, and OSP copper surface finishes. Capable of reducing voiding in BGA solder joints, it delivers high tack force to provide stability during high-speed component placement and offers long printer abandon times of up to 4 hr even when printed onto extremely fine-pitch 0.4 mm CSP apertures.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
May 21, 2009 UltraCore® FC 308L, 309L, and 316L are designed to provide high deposition rates in flat and horizontal positions, while UltraCore FCP 308L, 309L and 316L offer all-position welding capability. Each is designed to promote arc performance, facilitate slag removal, and produce minimal spatter. Weld deposits feature flat to concave bead profiles and are resistant to stainless steel welding challenges such as hot cracking.

Manncorp
Willow Grove, PA 19090
Apr 13, 2009 Applicable for wave soldering, Dross-B-Gone can recover 90% of pure solder originally used. Effective with both lead-free and lead solders, powder eliminates dross by oxidizing it into removable powder that is discarded, while pure molten solder remains in pot and becomes completely reusable. Non-polluting powder is sprinkled on molten solder at approximate ratio of 1/3 oz per 35.3 oz of solder dross; pure solder recovery rate is 31 oz.

Hobart Brothers Co.
Troy, OH 45373-2900
Apr 10, 2009 Suited for use in field repairs, structural steel erection, construction, and ship fabrication, Fabshield XLR-8(TM) is formulated with diffusible hydrogen levels below 6.7 ml per 100g of weld deposit to ensure X-ray quality welds with optimal crack resistance. It has D designator under AWS A5.20:2005, making it usable for strict AWS D1.8 Demand Critical welds, and offers stable arc as well as flat bead profile. Wire comes in 1/16, .072, and 5/64 in. dia and eliminates slag entrapment.

Honeywell
Golden Valley, MN 55422 3935
Mar 18, 2009 To improve operational reliability, Honeywell Pb-free Die Attach Solder helps manage heat produced by semiconductor chips by filling gap between chips and heat spreader. This lead (Pb)-free thermal interface material, intended to be used mainly in wire form, is designed to offer environmentally friendly alternative with combination of melting temperature, wetting behavior, and mechanical properties of lead-based solders.

Lincoln Electric Co. Inc., The
Cleveland, OH 44117
Feb 13, 2009 AWS A5.29 Class T1 Schedule I compliant, self-shielded and flux-cored wire Pipeliner® NR®-208P can carry and deposit weld metal vertical down pipe and out-of-position welding applications. Tested to exceed -20°C, wires can handle up to X80 grade pipe and are suited for hot, fill and cap-pass welding procedures.

Hobart Brothers Co.
Troy, OH 45373-2900
Dec 02, 2008 Classified under AWS A5.29, class E81T8-Ni2 J, self-shielded Hobart® Fabshield X80 provides tensile strength of 94,000 psi, yield strength of 84,000 psi, and CVN impact values from 107 lb/ft at -20°F to 96 lb/ft at -40°F. Wire is available in 5/64 in. diameter and features fast-freezing slag that is nearly self-peeling, making it suited for welding in all positions. Product can be used for single- or multi-pass welding on fillet, lap, or deep groove butt welds.

Indium Corporation of America
Utica, NY 13502
Nov 05, 2008 Colophony/rosin free, no-clean, cored wire solder, CW-501 comes in variety of alloys and wire diameters. Compatible with wave fluxes and Indium8.9, it provides wetting and solder spread with minimal smoking and low odor.

Hobart Brothers Co.
Troy, OH 45373-2900
Oct 23, 2008 Able to be used in all welding positions, self-shielded Fabshield® 23 suits general-purpose welding fabrication and repairs on thin gauge mild or galvanized steel and coated materials. It requires no shielding gas, enabling use outdoors or in drafty conditions, and produces minimal spatter to help minimize post-weld cleanup. Suitable for single-pass welding applications, wire is offered in .030, .035, .045, 1/16, and 3/32 in. dia in multiple packaging weights.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Oct 09, 2008 Models Select 410 and Select 410NiMo flux cored, martensitic stainless steel electrodes are available in 0.045-3/32 in. dia. Suited for welding straight 410 stainless steel, Select 410 contains 12% chromium and features oxidation resistance up to 1,200°F. Composed of 12% chromium, 4.5% nickel, and 0.65% molybdenum with maximum carbon content of 0.06%, Select 410NiMo is used to weld ASTM CA6NM castings and certain 410 alloys for blades and vanes in power generation equipment.

Kimball-Midwest
Columbus, OH 43228
Jul 28, 2008 Protecting materials by reducing heat transfer during soldering, brazing, welding, and open flame contact, Therma-Shield Heat Protection Paste eliminates disassembly of valves and other components. It can be applied to almost any surface or material, and conforms to irregular shapes and surfaces to provide total coverage and protection. Product is non-flammable, non-toxic, non-corrosive, and biodegradable, and helps eliminate waste as it can be applied only where needed.

Esico-Triton
Deep River, CT 06417
Jun 17, 2008 Available with lead-free coating for use with lead-free solders, bench-top Models PD-74, PD-33, and PD-24 feature easy repair design that prevents long cool down periods for maintenance as well as risk of overflow dross damage to controller.

Select-Arc, Inc.
Fort Loramie, OH 45845-0259
Jun 06, 2008 Utilizing microalloying and special fluxing ingredients to produce optimal CVN toughness, Select 71 Supreme promotes deposition rates and welder appeal through reduced fume emission and spatter levels as well as fast-freezing slag. This gas-shielded, tubular, flux-cored wire is designed for welding carbon steels requiring 70,000 psi. It also suits welding operations where the following steels may be employed: ASTM A131, A285, A515 Gr 70, and A516 Gr 70.